diff --git a/Bindings/Makefile b/Bindings/Makefile
index 129cf69..5e08e3a 100644
--- a/Bindings/Makefile
+++ b/Bindings/Makefile
@@ -64,9 +64,6 @@
 	-Wno-unique_unit_address \
 	-Wunique_unit_address_if_enabled
 
-# Disable undocumented compatible checks until warning free
-override DT_CHECKER_FLAGS ?=
-
 $(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
 	$(call if_changed_rule,chkdt)
 
diff --git a/Bindings/arm/amlogic.yaml b/Bindings/arm/amlogic.yaml
index caab7ce..949537c 100644
--- a/Bindings/arm/amlogic.yaml
+++ b/Bindings/arm/amlogic.yaml
@@ -7,19 +7,11 @@
 title: Amlogic SoC based Platforms
 
 maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+  - Jerome Brunet <jbrunet@baylibre.com>
   - Kevin Hilman <khilman@baylibre.com>
 
-description: |+
-  Work in progress statement:
-
-  Device tree files and bindings applying to Amlogic SoCs and boards are
-  considered "unstable". Any Amlogic device tree binding may change at
-  any time. Be sure to use a device tree binary and a kernel image
-  generated from the same source tree.
-
-  Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-  stable binding/ABI.
-
 properties:
   $nodename:
     const: '/'
@@ -146,6 +138,7 @@
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - freebox,fbx8am
               - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
diff --git a/Bindings/arm/arm,realview.yaml b/Bindings/arm/arm,realview.yaml
index d1bdee9..3c5f168 100644
--- a/Bindings/arm/arm,realview.yaml
+++ b/Bindings/arm/arm,realview.yaml
@@ -10,9 +10,9 @@
   - Linus Walleij <linus.walleij@linaro.org>
 
 description: |+
-  The ARM RealView series of reference designs were built to explore the ARM
-  11, Cortex A-8 and Cortex A-9 CPUs. This included new features compared to
-  the earlier CPUs such as TrustZone and multicore (MPCore).
+  The ARM RealView series of reference designs were built to explore the Arm11,
+  Cortex-A8, and Cortex-A9 CPUs. This included new features compared to the
+  earlier CPUs such as TrustZone and multicore (MPCore).
 
 properties:
   $nodename:
diff --git a/Bindings/arm/atmel-at91.yaml b/Bindings/arm/atmel-at91.yaml
index 89d75fb..82f3732 100644
--- a/Bindings/arm/atmel-at91.yaml
+++ b/Bindings/arm/atmel-at91.yaml
@@ -179,6 +179,12 @@
           - const: microchip,sama7g5
           - const: microchip,sama7
 
+      - description: Microchip SAMA7G54 Curiosity Board
+        items:
+          - const: microchip,sama7g54-curiosity
+          - const: microchip,sama7g5
+          - const: microchip,sama7
+
       - description: Microchip LAN9662 Evaluation Boards.
         items:
           - enum:
diff --git a/Bindings/arm/fsl.yaml b/Bindings/arm/fsl.yaml
index 228dcc5..0027201 100644
--- a/Bindings/arm/fsl.yaml
+++ b/Bindings/arm/fsl.yaml
@@ -384,7 +384,8 @@
               - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
               - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
               - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
-              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
+              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.0/v1.1
+              - toradex,apalis_imx6q-eval-v1.2  # Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2
           - const: toradex,apalis_imx6q
           - const: fsl,imx6q
 
@@ -469,6 +470,7 @@
               - prt,prtvt7                # Protonic VT7 board
               - rex,imx6dl-rex-basic      # Rex Basic i.MX6 Dual Lite Board
               - riot,imx6s-riotboard      # RIoTboard i.MX6S
+              - sielaff,imx6dl-board      # Sielaff i.MX6 Solo Board
               - skov,imx6dl-skov-revc-lt2 # SKOV IMX6 CPU SoloCore lt2
               - skov,imx6dl-skov-revc-lt6 # SKOV IMX6 CPU SoloCore lt6
               - solidrun,cubox-i/dl            # SolidRun Cubox-i Solo/DualLite
@@ -708,6 +710,7 @@
               - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
               - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
               - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
+              - uni-t,uti260b             # UNI-T UTi260B Thermal Camera
           - const: fsl,imx6ull
 
       - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
@@ -1026,7 +1029,7 @@
         items:
           - enum:
               - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board
-              - rve,rve-gateway # i.MX8MN RVE Gateway Board
+              - rve,gateway # i.MX8MN RVE Gateway Board
               - variscite,var-som-mx8mn-symphony
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
@@ -1194,7 +1197,8 @@
       - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
         items:
           - enum:
-              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation Board
+              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation V1.0/V1.1 Board
+              - toradex,apalis-imx8-eval-v1.2       # Apalis iMX8 Module on Apalis Evaluation V1.2 Board
               - toradex,apalis-imx8-ixora-v1.1      # Apalis iMX8 Module on Ixora V1.1 Carrier Board
           - const: toradex,apalis-imx8
           - const: fsl,imx8qm
@@ -1202,7 +1206,8 @@
       - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
         items:
           - enum:
-              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. Board
+              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. V1.0/V1.1 Board
+              - toradex,apalis-imx8-v1.1-eval-v1.2  # Apalis iMX8 V1.1 Module on Apalis Eval. V1.2 Board
               - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
               - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
           - const: toradex,apalis-imx8-v1.1
@@ -1232,6 +1237,22 @@
           - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
+      - description:
+          TQMa8Xx is a series of SOM featuring NXP i.MX8X system-on-chip
+          variants. It is designed to be clicked on different carrier boards
+          MBa8Xx is the starterkit
+        oneOf:
+          - items:
+              - enum:
+                  - tq,imx8dxp-tqma8xdp-mba8xx # TQ-Systems GmbH TQMa8XDP SOM on MBa8Xx
+              - const: tq,imx8dxp-tqma8xdp     # TQ-Systems GmbH TQMa8XDP SOM (with i.MX8DXP)
+              - const: fsl,imx8dxp
+          - items:
+              - enum:
+                  - tq,imx8qxp-tqma8xqp-mba8xx # TQ-Systems GmbH TQMa8XQP SOM on MBa8Xx
+              - const: tq,imx8qxp-tqma8xqp     # TQ-Systems GmbH TQMa8XQP SOM (with i.MX8QXP)
+              - const: fsl,imx8qxp
+
       - description: i.MX8ULP based Boards
         items:
           - enum:
@@ -1275,6 +1296,18 @@
           - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
           - const: fsl,imx93
 
+      - description: PHYTEC phyCORE-i.MX93 SoM based boards
+        items:
+          - const: phytec,imx93-phyboard-segin # phyBOARD-Segin with i.MX93
+          - const: phytec,imx93-phycore-som    # phyCORE-i.MX93 SoM
+          - const: fsl,imx93
+
+      - description: Variscite VAR-SOM-MX93 based boards
+        items:
+          - const: variscite,var-som-mx93-symphony
+          - const: variscite,var-som-mx93
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
diff --git a/Bindings/arm/marvell/armada-38x.txt b/Bindings/arm/marvell/armada-38x.txt
deleted file mode 100644
index 202953f..0000000
--- a/Bindings/arm/marvell/armada-38x.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell Armada 38x Platforms Device Tree Bindings
--------------------------------------------------
-
-Boards with a SoC of the Marvell Armada 38x family shall have the
-following property:
-
-Required root node property:
-
- - compatible: must contain "marvell,armada380"
-
-In addition, boards using the Marvell Armada 385 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada385"
-
-In addition, boards using the Marvell Armada 388 SoC shall have the
-following property before the previous one:
-
-Required root node property:
-
-compatible: must contain "marvell,armada388"
-
-Example:
-
-compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Bindings/arm/marvell/armada-38x.yaml b/Bindings/arm/marvell/armada-38x.yaml
new file mode 100644
index 0000000..cdf805b
--- /dev/null
+++ b/Bindings/arm/marvell/armada-38x.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-38x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 38x Platforms
+
+maintainers:
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description:
+          Netgear Armada 380 GS110EM Managed Switch.
+        items:
+          - const: netgear,gs110emx
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 385 Development Boards.
+        items:
+          - enum:
+              - marvell,a385-db-amc
+              - marvell,a385-db-ap
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 385 based single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-gtr-l8
+              - solidrun,clearfog-gtr-s4
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Kobol Armada 388 based Helios-4 NAS.
+        items:
+          - const: kobol,helios4
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          Marvell Armada 388 Development Boards.
+        items:
+          - enum:
+              - marvell,a388-gp
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+      - description:
+          SolidRun Armada 388 clearfog family single-board computers.
+        items:
+          - enum:
+              - solidrun,clearfog-base-a1
+              - solidrun,clearfog-pro-a1
+          - const: solidrun,clearfog-a1
+          - const: marvell,armada388
+          - const: marvell,armada385
+          - const: marvell,armada380
+
+additionalProperties: true
diff --git a/Bindings/arm/mediatek.yaml b/Bindings/arm/mediatek.yaml
index 6f2f64a..09f9ffd 100644
--- a/Bindings/arm/mediatek.yaml
+++ b/Bindings/arm/mediatek.yaml
@@ -17,6 +17,7 @@
     const: '/'
   compatible:
     oneOf:
+      # Sort by SoC (last) compatible, then board compatible
       - items:
           - enum:
               - mediatek,mt2701-evb
@@ -84,6 +85,11 @@
           - const: mediatek,mt7629
       - items:
           - enum:
+              - xiaomi,ax3000t
+          - const: mediatek,mt7981b
+      - items:
+          - enum:
+              - acelink,ew-7886cax
               - bananapi,bpi-r3
               - mediatek,mt7986a-rfb
           - const: mediatek,mt7986a
@@ -93,6 +99,10 @@
           - const: mediatek,mt7986b
       - items:
           - enum:
+              - bananapi,bpi-r4
+          - const: mediatek,mt7988a
+      - items:
+          - enum:
               - mediatek,mt8127-moose
           - const: mediatek,mt8127
       - items:
@@ -129,75 +139,10 @@
           - enum:
               - mediatek,mt8173-evb
           - const: mediatek,mt8173
-      - items:
-          - enum:
-              - mediatek,mt8183-evb
-          - const: mediatek,mt8183
-      - description: Google Hayato rev5
-        items:
-          - const: google,hayato-rev5-sku2
-          - const: google,hayato-sku2
-          - const: google,hayato
-          - const: mediatek,mt8192
-      - description: Google Hayato
-        items:
-          - const: google,hayato-rev1
-          - const: google,hayato
-          - const: mediatek,mt8192
-      - description: Google Spherion rev4 (Acer Chromebook 514)
-        items:
-          - const: google,spherion-rev4
-          - const: google,spherion
-          - const: mediatek,mt8192
-      - description: Google Spherion (Acer Chromebook 514)
-        items:
-          - const: google,spherion-rev3
-          - const: google,spherion-rev2
-          - const: google,spherion-rev1
-          - const: google,spherion-rev0
-          - const: google,spherion
-          - const: mediatek,mt8192
-      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
-        items:
-          - enum:
-              - google,tomato-rev2
-              - google,tomato-rev1
-          - const: google,tomato
-          - const: mediatek,mt8195
-      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
-        items:
-          - const: google,tomato-rev4
-          - const: google,tomato-rev3
-          - const: google,tomato
-          - const: mediatek,mt8195
-      - items:
-          - enum:
-              - mediatek,mt8186-evb
-          - const: mediatek,mt8186
-      - items:
-          - enum:
-              - mediatek,mt8188-evb
-          - const: mediatek,mt8188
-      - items:
-          - enum:
-              - mediatek,mt8192-evb
-          - const: mediatek,mt8192
-      - items:
-          - enum:
-              - mediatek,mt8195-demo
-              - mediatek,mt8195-evb
-          - const: mediatek,mt8195
       - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
         items:
           - const: google,burnet
           - const: mediatek,mt8183
-      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
-        items:
-          - enum:
-              - google,krane-sku0
-              - google,krane-sku176
-          - const: google,krane
-          - const: mediatek,mt8183
       - description: Google Cozmo (Acer Chromebook 314)
         items:
           - const: google,cozmo
@@ -255,6 +200,13 @@
               - google,kodama-sku32
           - const: google,kodama
           - const: mediatek,mt8183
+      - description: Google Krane (Lenovo IdeaPad Duet, 10e,...)
+        items:
+          - enum:
+              - google,krane-sku0
+              - google,krane-sku176
+          - const: google,krane
+          - const: mediatek,mt8183
       - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2)
         items:
           - enum:
@@ -278,8 +230,123 @@
           - const: mediatek,mt8183
       - items:
           - enum:
+              - mediatek,mt8183-evb
+          - const: mediatek,mt8183
+      - items:
+          - enum:
               - mediatek,mt8183-pumpkin
           - const: mediatek,mt8183
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393219
+          - const: google,steelix-sku393216
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393220
+          - const: google,steelix-sku393217
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Magneton (Lenovo IdeaPad Slim 3 Chromebook (14M868))
+        items:
+          - const: google,steelix-sku393221
+          - const: google,steelix-sku393218
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Rusty (Lenovo 100e Chromebook Gen 4)
+        items:
+          - const: google,steelix-sku196609
+          - const: google,steelix-sku196608
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Steelix (Lenovo 300e Yoga Chromebook Gen 4)
+        items:
+          - enum:
+              - google,steelix-sku131072
+              - google,steelix-sku131073
+          - const: google,steelix
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262147
+          - const: google,tentacruel-sku262146
+          - const: google,tentacruel-sku262145
+          - const: google,tentacruel-sku262144
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacruel (ASUS Chromebook CM14 Flip CM1402F)
+        items:
+          - const: google,tentacruel-sku262151
+          - const: google,tentacruel-sku262150
+          - const: google,tentacruel-sku262149
+          - const: google,tentacruel-sku262148
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327681
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - description: Google Tentacool (ASUS Chromebook CM14 CM1402C)
+        items:
+          - const: google,tentacruel-sku327683
+          - const: google,tentacruel
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8188-evb
+          - const: mediatek,mt8188
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Hayato rev5
+        items:
+          - const: google,hayato-rev5-sku2
+          - const: google,hayato-sku2
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - description: Google Spherion rev4 (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev4
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8195-demo
+              - mediatek,mt8195-evb
+          - const: mediatek,mt8195
       - items:
           - enum:
               - mediatek,mt8365-evk
@@ -287,6 +354,7 @@
       - items:
           - enum:
               - mediatek,mt8395-evk
+              - radxa,nio-12l
           - const: mediatek,mt8395
           - const: mediatek,mt8195
       - items:
diff --git a/Bindings/arm/mediatek/mediatek,hifsys.txt b/Bindings/arm/mediatek/mediatek,hifsys.txt
deleted file mode 100644
index 323905a..0000000
--- a/Bindings/arm/mediatek/mediatek,hifsys.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Mediatek hifsys controller
-============================
-
-The Mediatek hifsys controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt2701-hifsys", "syscon"
-	- "mediatek,mt7622-hifsys", "syscon"
-	- "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
-- #clock-cells: Must be 1
-
-The hifsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-hifsys: clock-controller@1a000000 {
-	compatible = "mediatek,mt2701-hifsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Bindings/arm/mediatek/mediatek,pciesys.txt b/Bindings/arm/mediatek/mediatek,pciesys.txt
deleted file mode 100644
index d179a61..0000000
--- a/Bindings/arm/mediatek/mediatek,pciesys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek PCIESYS controller
-============================
-
-The MediaTek PCIESYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-pciesys", "syscon"
-	- "mediatek,mt7629-pciesys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The PCIESYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-pciesys: pciesys@1a100800 {
-	compatible = "mediatek,mt7622-pciesys", "syscon";
-	reg = <0 0x1a100800 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Bindings/arm/mediatek/mediatek,ssusbsys.txt b/Bindings/arm/mediatek/mediatek,ssusbsys.txt
deleted file mode 100644
index 7cb02c9..0000000
--- a/Bindings/arm/mediatek/mediatek,ssusbsys.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek SSUSBSYS controller
-============================
-
-The MediaTek SSUSBSYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-ssusbsys", "syscon"
-	- "mediatek,mt7629-ssusbsys", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The SSUSBSYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-ssusbsys: ssusbsys@1a000000 {
-	compatible = "mediatek,mt7622-ssusbsys", "syscon";
-	reg = <0 0x1a000000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Bindings/arm/msm/qcom,saw2.txt b/Bindings/arm/msm/qcom,saw2.txt
deleted file mode 100644
index c0e3c3a..0000000
--- a/Bindings/arm/msm/qcom,saw2.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-SPM AVS Wrapper 2 (SAW2)
-
-The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
-Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
-power-controller that transitions a piece of hardware (like a processor or
-subsystem) into and out of low power modes via a direct connection to
-the PMIC. It can also be wired up to interact with other processors in the
-system, notifying them when a low power state is entered or exited.
-
-Multiple revisions of the SAW hardware are supported using these Device Nodes.
-SAW2 revisions differ in the register offset and configuration data. Also, the
-same revision of the SAW in different SoCs may have different configuration
-data due the differences in hardware capabilities. Hence the SoC name, the
-version of the SAW hardware in that SoC and the distinction between cpu (big
-or Little) or cache, may be needed to uniquely identify the SAW register
-configuration and initialization data. The compatible string is used to
-indicate this parameter.
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Must have
-			"qcom,saw2"
-		    A more specific value could be one of:
-			"qcom,apq8064-saw2-v1.1-cpu"
-			"qcom,msm8226-saw2-v2.1-cpu"
-			"qcom,msm8974-saw2-v2.1-cpu"
-			"qcom,apq8084-saw2-v2.1-cpu"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first element specifies the base address and size of
-		    the register region. An optional second element specifies
-		    the base address and size of the alias register region.
-
-- regulator:
-	Usage: optional
-	Value type: boolean
-	Definition: Indicates that this SPM device acts as a regulator device
-			device for the core (CPU or Cache) the SPM is attached
-			to.
-
-Example 1:
-
-	power-controller@2099000 {
-		compatible = "qcom,saw2";
-		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-		regulator;
-	};
-
-Example 2:
-	saw0: power-controller@f9089000 {
-		compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
-		reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
-	};
diff --git a/Bindings/arm/qcom,coresight-tpdm.yaml b/Bindings/arm/qcom,coresight-tpdm.yaml
index 61ddc3b..8eec07d 100644
--- a/Bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Bindings/arm/qcom,coresight-tpdm.yaml
@@ -44,14 +44,21 @@
     minItems: 1
     maxItems: 2
 
-  qcom,dsb-element-size:
+  qcom,dsb-element-bits:
     description:
       Specifies the DSB(Discrete Single Bit) element size supported by
       the monitor. The associated aggregator will read this size before it
       is enabled. DSB element size currently only supports 32-bit and 64-bit.
-    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [32, 64]
 
+  qcom,cmb-element-bits:
+    description:
+      Specifies the CMB(Continuous Multi-Bit) element size supported by
+      the monitor. The associated aggregator will read this size before it
+      is enabled. CMB element size currently only supports 8-bit, 32-bit
+      and 64-bit.
+    enum: [8, 32, 64]
+
   qcom,dsb-msrs-num:
     description:
       Specifies the number of DSB(Discrete Single Bit) MSR(mux select register)
@@ -61,6 +68,15 @@
     minimum: 0
     maximum: 32
 
+  qcom,cmb-msrs-num:
+    description:
+      Specifies the number of CMB MSR(mux select register) registers supported
+      by the monitor. If this property is not configured or set to 0, it means
+      this TPDM doesn't support CMB MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
   clocks:
     maxItems: 1
 
@@ -94,7 +110,7 @@
       compatible = "qcom,coresight-tpdm", "arm,primecell";
       reg = <0x0684c000 0x1000>;
 
-      qcom,dsb-element-size = /bits/ 8 <32>;
+      qcom,dsb-element-bits = <32>;
       qcom,dsb-msrs-num = <16>;
 
       clocks = <&aoss_qmp>;
@@ -110,4 +126,22 @@
       };
     };
 
+    tpdm@6c29000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x06c29000 0x1000>;
+
+      qcom,cmb-element-bits = <64>;
+      qcom,cmb-msrs-num = <32>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_ipcc_out_funnel_center: endpoint {
+            remote-endpoint = <&funnel_center_in_tpdm_ipcc>;
+          };
+        };
+      };
+    };
 ...
diff --git a/Bindings/arm/qcom.yaml b/Bindings/arm/qcom.yaml
index 1a5fb88..66beaac 100644
--- a/Bindings/arm/qcom.yaml
+++ b/Bindings/arm/qcom.yaml
@@ -10,17 +10,10 @@
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Some qcom based bootloaders identify the dtb blob based on a set of
-  device properties like SoC and platform and revisions of those components.
-  To support this scheme, we encode this information into the board compatible
-  string.
-
-  Each board must specify a top-level board compatible string with the following
-  format:
-
-  	compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
-
-  The 'SoC' and 'board' elements are required. All other elements are optional.
+  For devices using the Qualcomm SoC the "compatible" properties consists of
+  one or several "manufacturer,model" strings, describing the device itself,
+  followed by one or several "qcom,<SoC>" strings, describing the SoC used in
+  the device.
 
   The 'SoC' element must be one of the following strings:
 
@@ -90,43 +83,9 @@
         sm8650
         x1e80100
 
-  The 'board' element must be one of the following strings:
-
-        adp
-        cdp
-        dragonboard
-        idp
-        liquid
-        mtp
-        qcp
-        qrd
-        rb2
-        ride
-        sbc
-        x100
-
-  The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
-  where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
-  as v1. If all versions of the 'board_version' elements match, then a
-  wildcard '*' should be used, e.g. 'v*'.
-
-  The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
-
-  Examples:
-
-  	"qcom,msm8916-v1-cdp-pm8916-v2.1"
-
-  A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
-  2.1.
-
-  	"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
-
-  A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
-  foundry 2.
-
   There are many devices in the list below that run the standard ChromeOS
   bootloader setup and use the open source depthcharge bootloader to boot the
-  OS. These devices do not use the scheme described above. For details, see:
+  OS. These devices use the bootflow explained at
   https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html
 
 properties:
@@ -187,6 +146,7 @@
               - microsoft,superman-lte
               - microsoft,tesla
               - motorola,peregrine
+              - samsung,matisselte
           - const: qcom,msm8926
           - const: qcom,msm8226
 
@@ -244,11 +204,15 @@
               - samsung,a5u-eur
               - samsung,e5
               - samsung,e7
+              - samsung,fortuna3g
+              - samsung,gprimeltecan
               - samsung,grandmax
+              - samsung,grandprimelte
               - samsung,gt510
               - samsung,gt58
               - samsung,j5
               - samsung,j5x
+              - samsung,rossa
               - samsung,serranove
               - thwc,uf896
               - thwc,ufi001c
@@ -988,6 +952,7 @@
 
       - items:
           - enum:
+              - xiaomi,curtana
               - xiaomi,joyeuse
           - const: qcom,sm7125
 
@@ -1035,6 +1000,7 @@
 
       - items:
           - enum:
+              - qcom,sm8550-hdk
               - qcom,sm8550-mtp
               - qcom,sm8550-qrd
           - const: qcom,sm8550
diff --git a/Bindings/arm/rockchip.yaml b/Bindings/arm/rockchip.yaml
index 5cf5cbe..fcf7316 100644
--- a/Bindings/arm/rockchip.yaml
+++ b/Bindings/arm/rockchip.yaml
@@ -37,29 +37,16 @@
               - anbernic,rg351v
           - const: rockchip,rk3326
 
-      - description: Anbernic RG353P
+      - description: Anbernic RK3566 Handheld Gaming Console
         items:
-          - const: anbernic,rg353p
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353PS
-        items:
-          - const: anbernic,rg353ps
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353V
-        items:
-          - const: anbernic,rg353v
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG353VS
-        items:
-          - const: anbernic,rg353vs
-          - const: rockchip,rk3566
-
-      - description: Anbernic RG503
-        items:
-          - const: anbernic,rg503
+          - enum:
+              - anbernic,rg353p
+              - anbernic,rg353ps
+              - anbernic,rg353v
+              - anbernic,rg353vs
+              - anbernic,rg503
+              - anbernic,rg-arc-d
+              - anbernic,rg-arc-s
           - const: rockchip,rk3566
 
       - description: Asus Tinker board
@@ -237,6 +224,13 @@
               - friendlyarm,nanopi-r5s
           - const: rockchip,rk3568
 
+      - description: FriendlyElec NanoPi R6 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r6c
+              - friendlyarm,nanopi-r6s
+          - const: rockchip,rk3588s
+
       - description: FriendlyElec NanoPC T6
         items:
           - const: friendlyarm,nanopc-t6
@@ -626,9 +620,9 @@
           - const: openailab,eaidk-610
           - const: rockchip,rk3399
 
-      - description: Orange Pi RK3399 board
+      - description: Xunlong Orange Pi RK3399 board
         items:
-          - const: rockchip,rk3399-orangepi
+          - const: xunlong,rk3399-orangepi
           - const: rockchip,rk3399
 
       - description: Phytec phyCORE-RK3288 Rapid Development Kit
@@ -655,6 +649,14 @@
           - const: pine64,pinephone-pro
           - const: rockchip,rk3399
 
+      - description: Pine64 PineTab2
+        items:
+          - enum:
+              - pine64,pinetab2-v0.1
+              - pine64,pinetab2-v2.0
+          - const: pine64,pinetab2
+          - const: rockchip,rk3566
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -692,11 +694,17 @@
       - description: Powkiddy RK3566 Handheld Gaming Console
         items:
           - enum:
+              - powkiddy,rgb10max3
               - powkiddy,rgb30
               - powkiddy,rk2023
               - powkiddy,x55
           - const: rockchip,rk3566
 
+      - description: QNAP TS-433-4G 4-Bay NAS
+        items:
+          - const: qnap,ts433
+          - const: rockchip,rk3568
+
       - description: Radxa Compute Module 3(CM3)
         items:
           - enum:
@@ -878,6 +886,11 @@
           - const: rockchip,rv1108-evb
           - const: rockchip,rv1108
 
+      - description: Rockchip Toybrick TB-RK3588X board
+        items:
+          - const: rockchip,rk3588-toybrick-x0
+          - const: rockchip,rk3588
+
       - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
         items:
           - const: tsd,px30-ringneck-haikou
@@ -898,6 +911,12 @@
           - const: tsd,rk3588-jaguar
           - const: rockchip,rk3588
 
+      - description: Theobroma Systems RK3588-Q7 with Haikou baseboard
+        items:
+          - const: tsd,rk3588-tiger-haikou
+          - const: tsd,rk3588-tiger
+          - const: rockchip,rk3588
+
       - description: Tronsmart Orion R68 Meta
         items:
           - const: tronsmart,orion-r68-meta
@@ -940,9 +959,9 @@
           - const: rockchip,rk3568-evb1-v10
           - const: rockchip,rk3568
 
-      - description: Rockchip RK3568 Banana Pi R2 Pro
+      - description: Sinovoip RK3568 Banana Pi R2 Pro
         items:
-          - const: rockchip,rk3568-bpi-r2pro
+          - const: sinovoip,rk3568-bpi-r2pro
           - const: rockchip,rk3568
 
       - description: Sonoff iHost Smart Home Hub
diff --git a/Bindings/arm/sunxi.yaml b/Bindings/arm/sunxi.yaml
index a9d8e85..09d835d 100644
--- a/Bindings/arm/sunxi.yaml
+++ b/Bindings/arm/sunxi.yaml
@@ -815,6 +815,12 @@
           - const: allwinner,r7-tv-dongle
           - const: allwinner,sun5i-a10s
 
+      - description: Remix Mini PC
+        items:
+          - const: jide,remix-mini-pc
+          - const: allwinner,sun50i-h64
+          - const: allwinner,sun50i-a64
+
       - description: RerVision H3-DVK
         items:
           - const: rervision,h3-dvk
@@ -835,6 +841,12 @@
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: Sipeed Longan Pi 3H board for the Sipeed Longan Module 3H
+        items:
+          - const: sipeed,longan-pi-3h
+          - const: sipeed,longan-module-3h
+          - const: allwinner,sun50i-h618
+
       - description: SourceParts PopStick v1.1
         items:
           - const: sourceparts,popstick-v1.1
diff --git a/Bindings/arm/syna.txt b/Bindings/arm/syna.txt
index 851f48e..f53c430 100644
--- a/Bindings/arm/syna.txt
+++ b/Bindings/arm/syna.txt
@@ -6,18 +6,6 @@
 
 ---------------------------------------------------------------
 
-Work in progress statement:
-
-Device tree files and bindings applying to Marvell Berlin SoCs and boards are
-considered "unstable". Any Marvell Berlin device tree binding may change at any
-time. Be sure to use a device tree binary and a kernel image generated from the
-same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git a/Bindings/arm/tegra.yaml b/Bindings/arm/tegra.yaml
index fcf9564..8fb4923 100644
--- a/Bindings/arm/tegra.yaml
+++ b/Bindings/arm/tegra.yaml
@@ -64,6 +64,14 @@
       - items:
           - const: asus,tf700t
           - const: nvidia,tegra30
+      - description: LG Optimus 4X P880
+        items:
+          - const: lg,p880
+          - const: nvidia,tegra30
+      - description: LG Optimus Vu P895
+        items:
+          - const: lg,p895
+          - const: nvidia,tegra30
       - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
diff --git a/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
index 0faa403..ea4fbf6 100644
--- a/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
+++ b/Bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -27,7 +27,7 @@
       - const: pmc
       - const: wake
       - const: aotag
-      - const: scratch
+      - enum: [ scratch, misc ]
       - const: misc
 
   interrupt-controller: true
@@ -41,25 +41,43 @@
     description: If present, inverts the PMU interrupt signal.
     $ref: /schemas/types.yaml#/definitions/flag
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: nvidia,tegra186-pmc
-then:
-  properties:
-    reg:
-      maxItems: 4
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-pmc
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+          contains:
+            const: scratch
 
-    reg-names:
-      maxItems: 4
-else:
-  properties:
-    reg:
-      minItems: 5
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra194-pmc
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
 
-    reg-names:
-      minItems: 5
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-pmc
+    then:
+      properties:
+        reg-names:
+          contains:
+            const: misc
 
 patternProperties:
   "^[a-z0-9]+-[a-z0-9]+$":
diff --git a/Bindings/arm/ti/k3.yaml b/Bindings/arm/ti/k3.yaml
index c6506bc..52b51fd 100644
--- a/Bindings/arm/ti/k3.yaml
+++ b/Bindings/arm/ti/k3.yaml
@@ -87,12 +87,20 @@
           - const: tq,am642-tqma6442l
           - const: ti,am642
 
+      - description: K3 AM642 SoC SolidRun SoM based boards
+        items:
+          - enum:
+              - solidrun,am642-hummingboard-t
+          - const: solidrun,am642-sr-som
+          - const: ti,am642
+
       - description: K3 AM654 SoC
         items:
           - enum:
               - siemens,iot2050-advanced
               - siemens,iot2050-advanced-m2
               - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-advanced-sm
               - siemens,iot2050-basic
               - siemens,iot2050-basic-pg2
               - ti,am654-evm
@@ -123,6 +131,12 @@
               - ti,j721s2-evm
           - const: ti,j721s2
 
+      - description: K3 J722S SoC and Boards
+        items:
+          - enum:
+              - ti,j722s-evm
+          - const: ti,j722s
+
       - description: K3 J784s4 SoC
         items:
           - enum:
diff --git a/Bindings/ata/ahci-mtk.txt b/Bindings/ata/ahci-mtk.txt
deleted file mode 100644
index d2aa696..0000000
--- a/Bindings/ata/ahci-mtk.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-MediaTek Serial ATA controller
-
-Required properties:
- - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
-		     When using "mediatek,mtk-ahci" compatible strings, you
-		     need SoC specific ones in addition, one of:
-		     - "mediatek,mt7622-ahci"
- - reg		   : Physical base addresses and length of register sets.
- - interrupts	   : Interrupt associated with the SATA device.
- - interrupt-names : Associated name must be: "hostc".
- - clocks	   : A list of phandle and clock specifier pairs, one for each
-		     entry in clock-names.
- - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
- - phys		   : A phandle and PHY specifier pair for the PHY port.
- - phy-names	   : Associated name must be: "sata-phy".
- - ports-implemented : See ./ahci-platform.txt for details.
-
-Optional properties:
- - power-domains   : A phandle and power domain specifier pair to the power
-		     domain which is responsible for collapsing and restoring
-		     power to the peripheral.
- - resets	   : Must contain an entry for each entry in reset-names.
-		     See ../reset/reset.txt for details.
- - reset-names	   : Associated names must be: "axi", "sw", "reg".
- - mediatek,phy-mode : A phandle to the system controller, used to enable
-		       SATA function.
-
-Example:
-
-	sata: sata@1a200000 {
-		compatible = "mediatek,mt7622-ahci",
-			     "mediatek,mtk-ahci";
-		reg = <0 0x1a200000 0 0x1100>;
-		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hostc";
-		clocks = <&pciesys CLK_SATA_AHB_EN>,
-			 <&pciesys CLK_SATA_AXI_EN>,
-			 <&pciesys CLK_SATA_ASIC_EN>,
-			 <&pciesys CLK_SATA_RBC_EN>,
-			 <&pciesys CLK_SATA_PM_EN>;
-		clock-names = "ahb", "axi", "asic", "rbc", "pm";
-		phys = <&u3port1 PHY_TYPE_SATA>;
-		phy-names = "sata-phy";
-		ports-implemented = <0x1>;
-		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
-		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
-			 <&pciesys MT7622_SATA_PHY_SW_RST>,
-			 <&pciesys MT7622_SATA_PHY_REG_RST>;
-		reset-names = "axi", "sw", "reg";
-		mediatek,phy-mode = <&pciesys>;
-	};
diff --git a/Bindings/ata/atmel-at91_cf.txt b/Bindings/ata/atmel-at91_cf.txt
deleted file mode 100644
index c1d22b3..0000000
--- a/Bindings/ata/atmel-at91_cf.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Atmel AT91RM9200 CompactFlash
-
-Required properties:
-- compatible : "atmel,at91rm9200-cf".
-- reg : should specify localbus address and size used.
-- gpios : specifies the gpio pins to control the CF device. Detect
-  and reset gpio's are mandatory while irq and vcc gpio's are
-  optional and may be set to 0 if not present.
-
-Example:
-compact-flash@50000000 {
-	compatible = "atmel,at91rm9200-cf";
-	reg = <0x50000000 0x30000000>;
-	gpios = <&pioC 13 0	/* irq */
-		 &pioC 15 0 	/* detect */
-		 0		/* vcc */
-		 &pioC  5 0	/* reset */
-		>;
-};
diff --git a/Bindings/ata/mediatek,mtk-ahci.yaml b/Bindings/ata/mediatek,mtk-ahci.yaml
new file mode 100644
index 0000000..a34bd2e
--- /dev/null
+++ b/Bindings/ata/mediatek,mtk-ahci.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/mediatek,mtk-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Serial ATA controller
+
+maintainers:
+  - Ryder Lee <ryder.lee@mediatek.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-ahci
+      - const: mediatek,mtk-ahci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: hostc
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: axi
+      - const: asic
+      - const: rbc
+      - const: pm
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: axi
+      - const: sw
+      - const: reg
+
+  mediatek,phy-mode:
+    description: System controller phandle, used to enable SATA function
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports-implemented
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/mt7622-power.h>
+    #include <dt-bindings/reset/mt7622-reset.h>
+
+    sata@1a200000 {
+        compatible = "mediatek,mt7622-ahci", "mediatek,mtk-ahci";
+        reg = <0x1a200000 0x1100>;
+        interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "hostc";
+        clocks = <&pciesys CLK_SATA_AHB_EN>,
+                 <&pciesys CLK_SATA_AXI_EN>,
+                 <&pciesys CLK_SATA_ASIC_EN>,
+                 <&pciesys CLK_SATA_RBC_EN>,
+                 <&pciesys CLK_SATA_PM_EN>;
+        clock-names = "ahb", "axi", "asic", "rbc", "pm";
+        phys = <&u3port1 PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        ports-implemented = <0x1>;
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+        resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+                 <&pciesys MT7622_SATA_PHY_SW_RST>,
+                 <&pciesys MT7622_SATA_PHY_REG_RST>;
+        reset-names = "axi", "sw", "reg";
+        mediatek,phy-mode = <&pciesys>;
+    };
diff --git a/Bindings/auxdisplay/arm,versatile-lcd.yaml b/Bindings/auxdisplay/arm,versatile-lcd.yaml
index 5d02bd0..439f7b8 100644
--- a/Bindings/auxdisplay/arm,versatile-lcd.yaml
+++ b/Bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -39,6 +39,6 @@
 examples:
   - |
     lcd@10008000 {
-            compatible = "arm,versatile-lcd";
-            reg = <0x10008000 0x1000>;
+        compatible = "arm,versatile-lcd";
+        reg = <0x10008000 0x1000>;
     };
diff --git a/Bindings/auxdisplay/gpio-7-segment.yaml b/Bindings/auxdisplay/gpio-7-segment.yaml
new file mode 100644
index 0000000..3289548
--- /dev/null
+++ b/Bindings/auxdisplay/gpio-7-segment.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/gpio-7-segment.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO based LED segment display
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  compatible:
+    const: gpio-7-segment
+
+  segment-gpios:
+    description: |
+      An array of GPIOs one per segment. The first GPIO corresponds to the A
+      segment, the seventh GPIO corresponds to the G segment. Some LED blocks
+      also have a decimal point which can be specified as an optional eighth
+      segment.
+
+               -a-
+              |   |
+              f   b
+              |   |
+               -g-
+              |   |
+              e   c
+              |   |
+               -d-  dp
+
+    minItems: 7
+    maxItems: 8
+
+required:
+  - segment-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+
+    led-7seg {
+        compatible = "gpio-7-segment";
+        segment-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                        <&gpio 1 GPIO_ACTIVE_LOW>,
+                        <&gpio 2 GPIO_ACTIVE_LOW>,
+                        <&gpio 3 GPIO_ACTIVE_LOW>,
+                        <&gpio 4 GPIO_ACTIVE_LOW>,
+                        <&gpio 5 GPIO_ACTIVE_LOW>,
+                        <&gpio 6 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Bindings/auxdisplay/hit,hd44780.yaml b/Bindings/auxdisplay/hit,hd44780.yaml
index 406a922..3ca0e98 100644
--- a/Bindings/auxdisplay/hit,hd44780.yaml
+++ b/Bindings/auxdisplay/hit,hd44780.yaml
@@ -84,42 +84,44 @@
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    auxdisplay {
-            compatible = "hit,hd44780";
+    display-controller {
+        compatible = "hit,hd44780";
 
-            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-                         <&hc595 1 GPIO_ACTIVE_HIGH>,
-                         <&hc595 2 GPIO_ACTIVE_HIGH>,
-                         <&hc595 3 GPIO_ACTIVE_HIGH>;
-            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+        data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                     <&hc595 1 GPIO_ACTIVE_HIGH>,
+                     <&hc595 2 GPIO_ACTIVE_HIGH>,
+                     <&hc595 3 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 
-            display-height-chars = <2>;
-            display-width-chars = <16>;
+        display-height-chars = <2>;
+        display-width-chars = <16>;
     };
+
   - |
     #include <dt-bindings/gpio/gpio.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-            pcf8574: pcf8574@27 {
-                    compatible = "nxp,pcf8574";
-                    reg = <0x27>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-            };
+        pcf8574: gpio-expander@27 {
+            compatible = "nxp,pcf8574";
+            reg = <0x27>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
     };
-    hd44780 {
-            compatible = "hit,hd44780";
-            display-height-chars = <2>;
-            display-width-chars = <16>;
-            data-gpios = <&pcf8574 4 0>,
-                         <&pcf8574 5 0>,
-                         <&pcf8574 6 0>,
-                         <&pcf8574 7 0>;
-            enable-gpios = <&pcf8574 2 0>;
-            rs-gpios = <&pcf8574 0 0>;
-            rw-gpios = <&pcf8574 1 0>;
-            backlight-gpios = <&pcf8574 3 0>;
+
+    display-controller {
+        compatible = "hit,hd44780";
+        display-height-chars = <2>;
+        display-width-chars = <16>;
+        data-gpios = <&pcf8574 4 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 5 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 6 GPIO_ACTIVE_HIGH>,
+                     <&pcf8574 7 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&pcf8574 2 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&pcf8574 0 GPIO_ACTIVE_HIGH>;
+        rw-gpios = <&pcf8574 1 GPIO_ACTIVE_HIGH>;
+        backlight-gpios = <&pcf8574 3 GPIO_ACTIVE_HIGH>;
     };
diff --git a/Bindings/auxdisplay/holtek,ht16k33.yaml b/Bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b..b90eec2 100644
--- a/Bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Bindings/auxdisplay/holtek,ht16k33.yaml
@@ -74,31 +74,31 @@
     #include <dt-bindings/input/input.h>
     #include <dt-bindings/leds/common.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-            ht16k33: ht16k33@70 {
-                    compatible = "holtek,ht16k33";
-                    reg = <0x70>;
-                    refresh-rate-hz = <20>;
-                    interrupt-parent = <&gpio4>;
-                    interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-                    debounce-delay-ms = <50>;
-                    linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
-                                   <MATRIX_KEY(3, 0, KEY_F8)>,
-                                   <MATRIX_KEY(4, 0, KEY_F10)>,
-                                   <MATRIX_KEY(5, 0, KEY_F4)>,
-                                   <MATRIX_KEY(6, 0, KEY_F2)>,
-                                   <MATRIX_KEY(2, 1, KEY_F5)>,
-                                   <MATRIX_KEY(3, 1, KEY_F7)>,
-                                   <MATRIX_KEY(4, 1, KEY_F9)>,
-                                   <MATRIX_KEY(5, 1, KEY_F3)>,
-                                   <MATRIX_KEY(6, 1, KEY_F1)>;
+        display-controller@70 {
+            compatible = "holtek,ht16k33";
+            reg = <0x70>;
+            refresh-rate-hz = <20>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+            debounce-delay-ms = <50>;
+            linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                           <MATRIX_KEY(3, 0, KEY_F8)>,
+                           <MATRIX_KEY(4, 0, KEY_F10)>,
+                           <MATRIX_KEY(5, 0, KEY_F4)>,
+                           <MATRIX_KEY(6, 0, KEY_F2)>,
+                           <MATRIX_KEY(2, 1, KEY_F5)>,
+                           <MATRIX_KEY(3, 1, KEY_F7)>,
+                           <MATRIX_KEY(4, 1, KEY_F9)>,
+                           <MATRIX_KEY(5, 1, KEY_F3)>,
+                           <MATRIX_KEY(6, 1, KEY_F1)>;
 
-                    led {
-                            color = <LED_COLOR_ID_RED>;
-                            function = LED_FUNCTION_BACKLIGHT;
-                            linux,default-trigger = "backlight";
-                    };
+            led {
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_BACKLIGHT;
+                linux,default-trigger = "backlight";
             };
-      };
+        };
+    };
diff --git a/Bindings/auxdisplay/img,ascii-lcd.yaml b/Bindings/auxdisplay/img,ascii-lcd.yaml
index 1899b23..55e9831 100644
--- a/Bindings/auxdisplay/img,ascii-lcd.yaml
+++ b/Bindings/auxdisplay/img,ascii-lcd.yaml
@@ -50,6 +50,6 @@
 examples:
   - |
     lcd: lcd@17fff000 {
-            compatible = "img,boston-lcd";
-            reg = <0x17fff000 0x8>;
+        compatible = "img,boston-lcd";
+        reg = <0x17fff000 0x8>;
     };
diff --git a/Bindings/auxdisplay/maxim,max6959.yaml b/Bindings/auxdisplay/maxim,max6959.yaml
new file mode 100644
index 0000000..20dd9e8
--- /dev/null
+++ b/Bindings/auxdisplay/maxim,max6959.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/auxdisplay/maxim,max6959.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX6958/6959 7-segment LED display controller
+
+maintainers:
+  - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+description:
+  The Maxim MAX6958/6959 7-segment LED display controller provides
+  an I2C interface to up to four 7-segment LED digits. The MAX6959,
+  in comparison to MAX6958, adds input support. Type of the chip can
+  be autodetected via specific register read, and hence the features
+  may be enabled in the driver at run-time, in case they are requested
+  via Device Tree. A given hardware is simple and does not provide
+  any additional pins, such as reset or power enable.
+
+properties:
+  compatible:
+    const: maxim,max6959
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display-controller@38 {
+            compatible = "maxim,max6959";
+            reg = <0x38>;
+        };
+    };
diff --git a/Bindings/bus/brcm,gisb-arb.yaml b/Bindings/bus/brcm,gisb-arb.yaml
index 3aaefdb..9017c5a 100644
--- a/Bindings/bus/brcm,gisb-arb.yaml
+++ b/Bindings/bus/brcm,gisb-arb.yaml
@@ -18,6 +18,7 @@
           - const: brcm,gisb-arb
       - items:
           - enum:
+              - brcm,bcm74165-gisb-arb  # for V7 new style 16nm chips
               - brcm,bcm7278-gisb-arb  # for V7 28nm chips
               - brcm,bcm7435-gisb-arb  # for newer 40nm chips
               - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
diff --git a/Bindings/bus/imx-weim.txt b/Bindings/bus/imx-weim.txt
deleted file mode 100644
index e7f5020..0000000
--- a/Bindings/bus/imx-weim.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-Device tree bindings for i.MX Wireless External Interface Module (WEIM)
-
-The term "wireless" does not imply that the WEIM is literally an interface
-without wires. It simply means that this module was originally designed for
-wireless and mobile applications that use low-power technology.
-
-The actual devices are instantiated from the child nodes of a WEIM node.
-
-Required properties:
-
- - compatible:		Should contain one of the following:
-			  "fsl,imx1-weim"
-			  "fsl,imx27-weim"
-			  "fsl,imx51-weim"
-			  "fsl,imx50-weim"
-			  "fsl,imx6q-weim"
- - reg:			A resource specifier for the register space
-			(see the example below)
- - clocks:		the clock, see the example below.
- - #address-cells:	Must be set to 2 to allow memory address translation
- - #size-cells:		Must be set to 1 to allow CS address passing
- - ranges:		Must be set up to reflect the memory layout with four
-			integer values for each chip-select line in use:
-
-			   <cs-number> 0 <physical address of mapping> <size>
-
-Optional properties:
-
- - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, it should be the phandle to the system General
-			Purpose Register controller that contains WEIM CS GPR
-			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
-			should be set up as one of the following 4 possible
-			values depending on the CS space configuration.
-
-			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
-			---------------------------------------------
-				05	    128M     0M     0M     0M
-				033          64M    64M     0M     0M
-				0113         64M    32M    32M     0M
-				01111        32M    32M    32M    32M
-
-			In case that the property is absent, the reset value or
-			what bootloader sets up in IOMUXC_GPR1[11:0] will be
-			used.
-
- - fsl,burst-clk-enable	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
-			devices, the presence of this property indicates that
-			the weim bus should operate in Burst Clock Mode.
-
- - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
-			Without this option Burst Clock will output clock
-			only when necessary. This takes effect only if
-			"fsl,burst-clk-enable" is set.
-
-Timing property for child nodes. It is mandatory, not optional.
-
- - fsl,weim-cs-timing:	The timing array, contains timing values for the
-			child node. We get the CS indexes from the address
-			ranges in the child node's "reg" property.
-			The number of registers depends on the selected chip:
-			For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
-			registers: CSxU, CSxL.
-			For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
-			there are three registers: CSCRxU, CSCRxL, CSCRxA.
-			For i.MX50, i.MX53 ("fsl,imx50-weim"),
-			i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
-			there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
-			CSxRCR2, CSxWCR1, CSxWCR2.
-
-Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x08000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		nor@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
-					0x0000c000 0x1404a38e 0x00000000>;
-		};
-	};
-
-Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
-
-In this case, both chip select 0 and 1 will be configured with the same timing
-array values.
-
-	weim: weim@21b8000 {
-		compatible = "fsl,imx6q-weim";
-		reg = <0x021b8000 0x4000>;
-		clocks = <&clks 196>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x02000000
-			  1 0 0x0a000000 0x02000000
-			  2 0 0x0c000000 0x02000000
-			  3 0 0x0e000000 0x02000000>;
-		fsl,weim-cs-gpr = <&gpr>;
-
-		acme@0 {
-			compatible = "acme,whatever";
-			reg = <0 0 0x100>, <0 0x400000 0x800>,
-				<1 0x400000 0x800>;
-			fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
-				0x00000000 0xa0000240 0x00000000>;
-		};
-	};
diff --git a/Bindings/clock/google,gs101-clock.yaml b/Bindings/clock/google,gs101-clock.yaml
index ca7fdad..1d2bcea 100644
--- a/Bindings/clock/google,gs101-clock.yaml
+++ b/Bindings/clock/google,gs101-clock.yaml
@@ -30,14 +30,16 @@
       - google,gs101-cmu-top
       - google,gs101-cmu-apm
       - google,gs101-cmu-misc
+      - google,gs101-cmu-peric0
+      - google,gs101-cmu-peric1
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   clock-names:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   "#clock-cells":
     const: 1
@@ -88,6 +90,28 @@
             - const: bus
             - const: sss
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-peric0
+              - google,gs101-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: Connectivity Peripheral 0/1 bus clock (from CMU_TOP)
+            - description: Connectivity Peripheral 0/1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: ip
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/clock/keystone-gate.txt b/Bindings/clock/keystone-gate.txt
index c5aa187..43f6fb6 100644
--- a/Bindings/clock/keystone-gate.txt
+++ b/Bindings/clock/keystone-gate.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for Keystone gate control driver which uses PSC controller IP.
 
 This binding uses the common clock binding[1].
diff --git a/Bindings/clock/keystone-pll.txt b/Bindings/clock/keystone-pll.txt
index 9a3fbc6..69b0eb7 100644
--- a/Bindings/clock/keystone-pll.txt
+++ b/Bindings/clock/keystone-pll.txt
@@ -1,5 +1,3 @@
-Status: Unstable - ABI compatibility may be broken in the future
-
 Binding for keystone PLLs. The main PLL IP typically has a multiplier,
 a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
 and PAPLL are controlled by the memory mapped register where as the Main
diff --git a/Bindings/clock/mediatek,mt2701-hifsys.yaml b/Bindings/clock/mediatek,mt2701-hifsys.yaml
new file mode 100644
index 0000000..9e7c725
--- /dev/null
+++ b/Bindings/clock/mediatek,mt2701-hifsys.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt2701-hifsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek HIFSYS clock and reset controller
+
+description:
+  The MediaTek HIFSYS controller provides various clocks and reset outputs to
+  the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-hifsys
+          - mediatek,mt7622-hifsys
+      - items:
+          - enum:
+              - mediatek,mt7623-hifsys
+          - const: mediatek,mt2701-hifsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt2701-hifsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mt7622-pciesys.yaml b/Bindings/clock/mediatek,mt7622-pciesys.yaml
new file mode 100644
index 0000000..c77111d
--- /dev/null
+++ b/Bindings/clock/mediatek,mt7622-pciesys.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-pciesys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIESYS clock and reset controller
+
+description:
+  The MediaTek PCIESYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-pciesys
+      - mediatek,mt7629-pciesys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a100800 {
+        compatible = "mediatek,mt7622-pciesys";
+        reg = <0x1a100800 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/mediatek,mt7622-ssusbsys.yaml b/Bindings/clock/mediatek,mt7622-ssusbsys.yaml
new file mode 100644
index 0000000..da93ecc
--- /dev/null
+++ b/Bindings/clock/mediatek,mt7622-ssusbsys.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt7622-ssusbsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SSUSBSYS clock and reset controller
+
+description:
+  The MediaTek SSUSBSYS controller provides various clocks to the system.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-ssusbsys
+      - mediatek,mt7629-ssusbsys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+    description: The available clocks are defined in dt-bindings/clock/mt*-clk.h
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@1a000000 {
+        compatible = "mediatek,mt7622-ssusbsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/clock/mobileye,eyeq5-clk.yaml b/Bindings/clock/mobileye,eyeq5-clk.yaml
new file mode 100644
index 0000000..2d4f2cd
--- /dev/null
+++ b/Bindings/clock/mobileye,eyeq5-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mobileye,eyeq5-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 clock controller
+
+description:
+  The EyeQ5 clock controller handles 10 read-only PLLs derived from the main
+  crystal clock. It also exposes one divider clock, a child of one of the PLLs.
+  Its registers live in a shared region called OLB.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+properties:
+  compatible:
+    const: mobileye,eyeq5-clk
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: plls
+      - const: ospi
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input parent clock to all PLLs. Expected to be the main crystal.
+
+  clock-names:
+    items:
+      - const: ref
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
diff --git a/Bindings/clock/qcom,gcc-sc8180x.yaml b/Bindings/clock/qcom,gcc-sc8180x.yaml
index 6c4846b..a1085ef 100644
--- a/Bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/Bindings/clock/qcom,gcc-sc8180x.yaml
@@ -31,10 +31,15 @@
       - const: bi_tcxo_ao
       - const: sleep_clk
 
+  power-domains:
+    items:
+      - description: CX domain
+
 required:
   - compatible
   - clocks
   - clock-names
+  - power-domains
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -44,6 +49,7 @@
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@100000 {
       compatible = "qcom,gcc-sc8180x";
       reg = <0x00100000 0x1f0000>;
@@ -51,6 +57,7 @@
                <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
       clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      power-domains = <&rpmhpd SC8180X_CX>;
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Bindings/clock/qcom,gpucc.yaml b/Bindings/clock/qcom,gpucc.yaml
index f369fa3..f57aced 100644
--- a/Bindings/clock/qcom,gpucc.yaml
+++ b/Bindings/clock/qcom,gpucc.yaml
@@ -53,6 +53,9 @@
   power-domains:
     maxItems: 1
 
+  vdd-gfx-supply:
+    description: Regulator supply for the VDD_GFX pads
+
   '#clock-cells':
     const: 1
 
@@ -74,6 +77,12 @@
   - '#reset-cells'
   - '#power-domain-cells'
 
+# Require that power-domains and vdd-gfx-supply are not both present
+not:
+  required:
+    - power-domains
+    - vdd-gfx-supply
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/clock/qcom,q6sstopcc.yaml b/Bindings/clock/qcom,q6sstopcc.yaml
index 03fa30f..e0f4d69 100644
--- a/Bindings/clock/qcom,q6sstopcc.yaml
+++ b/Bindings/clock/qcom,q6sstopcc.yaml
@@ -7,7 +7,7 @@
 title: Q6SSTOP clock Controller
 
 maintainers:
-  - Govind Singh <govinds@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 properties:
   compatible:
diff --git a/Bindings/clock/qcom,sc7180-mss.yaml b/Bindings/clock/qcom,sc7180-mss.yaml
deleted file mode 100644
index 873a2f9..0000000
--- a/Bindings/clock/qcom,sc7180-mss.yaml
+++ /dev/null
@@ -1,61 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Modem Clock Controller on SC7180
-
-maintainers:
-  - Taniya Das <quic_tdas@quicinc.com>
-
-description: |
-  Qualcomm modem clock control module provides the clocks on SC7180.
-
-  See also:: include/dt-bindings/clock/qcom,mss-sc7180.h
-
-properties:
-  compatible:
-    const: qcom,sc7180-mss
-
-  clocks:
-    items:
-      - description: gcc_mss_mfab_axi clock from GCC
-      - description: gcc_mss_nav_axi clock from GCC
-      - description: gcc_mss_cfg_ahb clock from GCC
-
-  clock-names:
-    items:
-      - const: gcc_mss_mfab_axis
-      - const: gcc_mss_nav_axi
-      - const: cfg_ahb
-
-  '#clock-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    clock-controller@41a8000 {
-      compatible = "qcom,sc7180-mss";
-      reg = <0x041a8000 0x8000>;
-      clocks = <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-               <&gcc GCC_MSS_NAV_AXI_CLK>,
-               <&gcc GCC_MSS_CFG_AHB_CLK>;
-      clock-names = "gcc_mss_mfab_axis",
-                    "gcc_mss_nav_axi",
-                    "cfg_ahb";
-      #clock-cells = <1>;
-    };
-...
diff --git a/Bindings/clock/qcom,sm8450-camcc.yaml b/Bindings/clock/qcom,sm8450-camcc.yaml
index 4898646..fa0e5b6 100644
--- a/Bindings/clock/qcom,sm8450-camcc.yaml
+++ b/Bindings/clock/qcom,sm8450-camcc.yaml
@@ -17,6 +17,7 @@
     include/dt-bindings/clock/qcom,sm8450-camcc.h
     include/dt-bindings/clock/qcom,sm8550-camcc.h
     include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+    include/dt-bindings/clock/qcom,x1e80100-camcc.h
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -27,6 +28,7 @@
       - qcom,sc8280xp-camcc
       - qcom,sm8450-camcc
       - qcom,sm8550-camcc
+      - qcom,x1e80100-camcc
 
   clocks:
     items:
diff --git a/Bindings/clock/qcom,sm8450-gpucc.yaml b/Bindings/clock/qcom,sm8450-gpucc.yaml
index 1a384e8..3697430 100644
--- a/Bindings/clock/qcom,sm8450-gpucc.yaml
+++ b/Bindings/clock/qcom,sm8450-gpucc.yaml
@@ -18,6 +18,7 @@
     include/dt-bindings/clock/qcom,sm8550-gpucc.h
     include/dt-bindings/reset/qcom,sm8450-gpucc.h
     include/dt-bindings/reset/qcom,sm8650-gpucc.h
+    include/dt-bindings/reset/qcom,x1e80100-gpucc.h
 
 properties:
   compatible:
@@ -25,6 +26,7 @@
       - qcom,sm8450-gpucc
       - qcom,sm8550-gpucc
       - qcom,sm8650-gpucc
+      - qcom,x1e80100-gpucc
 
   clocks:
     items:
diff --git a/Bindings/clock/qcom,sm8550-dispcc.yaml b/Bindings/clock/qcom,sm8550-dispcc.yaml
index c129f8c..bad0260 100644
--- a/Bindings/clock/qcom,sm8550-dispcc.yaml
+++ b/Bindings/clock/qcom,sm8550-dispcc.yaml
@@ -14,12 +14,17 @@
   Qualcomm display clock control module provides the clocks, resets and power
   domains on SM8550.
 
-  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  - include/dt-bindings/clock/qcom,sm8650-dispcc.h
+  - include/dt-bindings/clock/qcom,x1e80100-dispcc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8550-dispcc
+      - qcom,sm8650-dispcc
+      - qcom,x1e80100-dispcc
 
   clocks:
     items:
diff --git a/Bindings/clock/qcom,sm8550-tcsr.yaml b/Bindings/clock/qcom,sm8550-tcsr.yaml
index af16b05..48fdd56 100644
--- a/Bindings/clock/qcom,sm8550-tcsr.yaml
+++ b/Bindings/clock/qcom,sm8550-tcsr.yaml
@@ -23,6 +23,7 @@
       - enum:
           - qcom,sm8550-tcsr
           - qcom,sm8650-tcsr
+          - qcom,x1e80100-tcsr
       - const: syscon
 
   clocks:
diff --git a/Bindings/clock/qcom,sm8650-dispcc.yaml b/Bindings/clock/qcom,sm8650-dispcc.yaml
deleted file mode 100644
index 5e0c45c..0000000
--- a/Bindings/clock/qcom,sm8650-dispcc.yaml
+++ /dev/null
@@ -1,106 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display Clock & Reset Controller for SM8650
-
-maintainers:
-  - Bjorn Andersson <andersson@kernel.org>
-  - Neil Armstrong <neil.armstrong@linaro.org>
-
-description: |
-  Qualcomm display clock control module provides the clocks, resets and power
-  domains on SM8650.
-
-  See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h
-
-properties:
-  compatible:
-    enum:
-      - qcom,sm8650-dispcc
-
-  clocks:
-    items:
-      - description: Board XO source
-      - description: Board Always On XO source
-      - description: Display's AHB clock
-      - description: sleep clock
-      - description: Byte clock from DSI PHY0
-      - description: Pixel clock from DSI PHY0
-      - description: Byte clock from DSI PHY1
-      - description: Pixel clock from DSI PHY1
-      - description: Link clock from DP PHY0
-      - description: VCO DIV clock from DP PHY0
-      - description: Link clock from DP PHY1
-      - description: VCO DIV clock from DP PHY1
-      - description: Link clock from DP PHY2
-      - description: VCO DIV clock from DP PHY2
-      - description: Link clock from DP PHY3
-      - description: VCO DIV clock from DP PHY3
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  power-domains:
-    description:
-      A phandle and PM domain specifier for the MMCX power domain.
-    maxItems: 1
-
-  required-opps:
-    description:
-      A phandle to an OPP node describing required MMCX performance point.
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-    #include <dt-bindings/power/qcom,rpmhpd.h>
-    clock-controller@af00000 {
-      compatible = "qcom,sm8650-dispcc";
-      reg = <0x0af00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&rpmhcc RPMH_CXO_CLK_A>,
-               <&gcc GCC_DISP_AHB_CLK>,
-               <&sleep_clk>,
-               <&dsi0_phy 0>,
-               <&dsi0_phy 1>,
-               <&dsi1_phy 0>,
-               <&dsi1_phy 1>,
-               <&dp0_phy 0>,
-               <&dp0_phy 1>,
-               <&dp1_phy 0>,
-               <&dp1_phy 1>,
-               <&dp2_phy 0>,
-               <&dp2_phy 1>,
-               <&dp3_phy 0>,
-               <&dp3_phy 1>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      power-domains = <&rpmhpd RPMHPD_MMCX>;
-      required-opps = <&rpmhpd_opp_low_svs>;
-    };
-...
diff --git a/Bindings/clock/renesas,cpg-mssr.yaml b/Bindings/clock/renesas,cpg-mssr.yaml
index 9c3dc6c..084259d 100644
--- a/Bindings/clock/renesas,cpg-mssr.yaml
+++ b/Bindings/clock/renesas,cpg-mssr.yaml
@@ -50,6 +50,7 @@
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
       - renesas,r8a779f0-cpg-mssr # R-Car S4-8
       - renesas,r8a779g0-cpg-mssr # R-Car V4H
+      - renesas,r8a779h0-cpg-mssr # R-Car V4M
 
   reg:
     maxItems: 1
diff --git a/Bindings/clock/samsung,exynos850-clock.yaml b/Bindings/clock/samsung,exynos850-clock.yaml
index c752c89..cdc5ded 100644
--- a/Bindings/clock/samsung,exynos850-clock.yaml
+++ b/Bindings/clock/samsung,exynos850-clock.yaml
@@ -36,6 +36,8 @@
       - samsung,exynos850-cmu-aud
       - samsung,exynos850-cmu-cmgp
       - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-cpucl0
+      - samsung,exynos850-cmu-cpucl1
       - samsung,exynos850-cmu-dpu
       - samsung,exynos850-cmu-g3d
       - samsung,exynos850-cmu-hsi
@@ -156,6 +158,46 @@
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-cpucl0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL0 switch clock (from CMU_TOP)
+            - description: CPUCL0 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl0_switch
+            - const: dout_cpucl0_dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cpucl1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CPUCL1 switch clock (from CMU_TOP)
+            - description: CPUCL1 debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cpucl1_switch
+            - const: dout_cpucl1_dbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-dpu
 
     then:
diff --git a/Bindings/clock/tesla,fsd-clock.yaml b/Bindings/clock/tesla,fsd-clock.yaml
index dc808e2..b370a10 100644
--- a/Bindings/clock/tesla,fsd-clock.yaml
+++ b/Bindings/clock/tesla,fsd-clock.yaml
@@ -12,7 +12,7 @@
 
 description: |
   FSD clock controller consist of several clock management unit
-  (CMU), which generates clocks for various inteernal SoC blocks.
+  (CMU), which generates clocks for various internal SoC blocks.
   The root clock comes from external OSC clock (24 MHz).
 
   All available clocks are defined as preprocessor macros in
diff --git a/Bindings/clock/ti/adpll.txt b/Bindings/clock/ti/adpll.txt
index 4c8a2ce..3122360 100644
--- a/Bindings/clock/ti/adpll.txt
+++ b/Bindings/clock/ti/adpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments ADPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped ADPLL with two to three selectable input clocks
 and three to four children.
diff --git a/Bindings/clock/ti/apll.txt b/Bindings/clock/ti/apll.txt
index ade4dd4..bbd505c 100644
--- a/Bindings/clock/ti/apll.txt
+++ b/Bindings/clock/ti/apll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments APLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped APLL with usually two selectable input clocks
 (reference clock and bypass clock), with analog phase locked
diff --git a/Bindings/clock/ti/autoidle.txt b/Bindings/clock/ti/autoidle.txt
index 7c735dd..05645a1 100644
--- a/Bindings/clock/ti/autoidle.txt
+++ b/Bindings/clock/ti/autoidle.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments autoidle clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a register mapped
 clock which can be put to idle automatically by hardware based on the usage
 and a configuration bit setting. Autoidle clock is never an individual
diff --git a/Bindings/clock/ti/clockdomain.txt b/Bindings/clock/ti/clockdomain.txt
index 9c61992..edf0b5d 100644
--- a/Bindings/clock/ti/clockdomain.txt
+++ b/Bindings/clock/ti/clockdomain.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments clockdomain.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1] in consumer role.
 Every clock on TI SoC belongs to one clockdomain, but software
 only needs this information for specific clocks which require
diff --git a/Bindings/clock/ti/composite.txt b/Bindings/clock/ti/composite.txt
index 33ac7c9..6f7e133 100644
--- a/Bindings/clock/ti/composite.txt
+++ b/Bindings/clock/ti/composite.txt
@@ -1,7 +1,5 @@
 Binding for TI composite clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped composite clock with multiple different sub-types;
 
diff --git a/Bindings/clock/ti/divider.txt b/Bindings/clock/ti/divider.txt
index 9b13b32..4d7c76f 100644
--- a/Bindings/clock/ti/divider.txt
+++ b/Bindings/clock/ti/divider.txt
@@ -1,7 +1,5 @@
 Binding for TI divider clock
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped adjustable clock rate divider that does not gate and has
 only one input clock or parent.  By default the value programmed into
diff --git a/Bindings/clock/ti/dpll.txt b/Bindings/clock/ti/dpll.txt
index 37a7cb6..14a1b72 100644
--- a/Bindings/clock/ti/dpll.txt
+++ b/Bindings/clock/ti/dpll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments DPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped DPLL with usually two selectable input clocks
 (reference clock and bypass clock), with digital phase locked
diff --git a/Bindings/clock/ti/fapll.txt b/Bindings/clock/ti/fapll.txt
index c19b3f2..88986ef 100644
--- a/Bindings/clock/ti/fapll.txt
+++ b/Bindings/clock/ti/fapll.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments FAPLL clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. It assumes a
 register-mapped FAPLL with usually two selectable input clocks
 (reference clock and bypass clock), and one or more child
diff --git a/Bindings/clock/ti/fixed-factor-clock.txt b/Bindings/clock/ti/fixed-factor-clock.txt
index 518e3c1..dc69477 100644
--- a/Bindings/clock/ti/fixed-factor-clock.txt
+++ b/Bindings/clock/ti/fixed-factor-clock.txt
@@ -1,7 +1,5 @@
 Binding for TI fixed factor rate clock sources.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1], and also uses the autoidle
 support from TI autoidle clock [2].
 
diff --git a/Bindings/clock/ti/gate.txt b/Bindings/clock/ti/gate.txt
index 4982615..a8e0335 100644
--- a/Bindings/clock/ti/gate.txt
+++ b/Bindings/clock/ti/gate.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments gate clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features. If no register
diff --git a/Bindings/clock/ti/interface.txt b/Bindings/clock/ti/interface.txt
index d3eb5ca..85fb1f2 100644
--- a/Bindings/clock/ti/interface.txt
+++ b/Bindings/clock/ti/interface.txt
@@ -1,7 +1,5 @@
 Binding for Texas Instruments interface clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1]. This clock is
 quite much similar to the basic gate-clock [2], however,
 it supports a number of additional features, including
diff --git a/Bindings/clock/ti/mux.txt b/Bindings/clock/ti/mux.txt
index b33f641..cd56d3c 100644
--- a/Bindings/clock/ti/mux.txt
+++ b/Bindings/clock/ti/mux.txt
@@ -1,7 +1,5 @@
 Binding for TI mux clock.
 
-Binding status: Unstable - ABI compatibility may be broken in the future
-
 This binding uses the common clock binding[1].  It assumes a
 register-mapped multiplexer with multiple input clock signals or
 parents, one of which can be selected as output.  This clock does not
diff --git a/Bindings/crypto/atmel,at91sam9g46-aes.yaml b/Bindings/crypto/atmel,at91sam9g46-aes.yaml
index 0b7383b..7dc0748 100644
--- a/Bindings/crypto/atmel,at91sam9g46-aes.yaml
+++ b/Bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -12,7 +12,11 @@
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-aes
+    oneOf:
+      - const: atmel,at91sam9g46-aes
+      - items:
+          - const: microchip,sam9x7-aes
+          - const: atmel,at91sam9g46-aes
 
   reg:
     maxItems: 1
diff --git a/Bindings/crypto/atmel,at91sam9g46-sha.yaml b/Bindings/crypto/atmel,at91sam9g46-sha.yaml
index ee2ffb0..d378c53 100644
--- a/Bindings/crypto/atmel,at91sam9g46-sha.yaml
+++ b/Bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -12,7 +12,11 @@
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-sha
+    oneOf:
+      - const: atmel,at91sam9g46-sha
+      - items:
+          - const: microchip,sam9x7-sha
+          - const: atmel,at91sam9g46-sha
 
   reg:
     maxItems: 1
diff --git a/Bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Bindings/crypto/atmel,at91sam9g46-tdes.yaml
index 3d6ed24..6a441f7 100644
--- a/Bindings/crypto/atmel,at91sam9g46-tdes.yaml
+++ b/Bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -12,7 +12,11 @@
 
 properties:
   compatible:
-    const: atmel,at91sam9g46-tdes
+    oneOf:
+      - const: atmel,at91sam9g46-tdes
+      - items:
+          - const: microchip,sam9x7-tdes
+          - const: atmel,at91sam9g46-tdes
 
   reg:
     maxItems: 1
diff --git a/Bindings/crypto/qcom,inline-crypto-engine.yaml b/Bindings/crypto/qcom,inline-crypto-engine.yaml
index 09e4315..e91bc7d 100644
--- a/Bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -14,6 +14,7 @@
     items:
       - enum:
           - qcom,sa8775p-inline-crypto-engine
+          - qcom,sc7180-inline-crypto-engine
           - qcom,sm8450-inline-crypto-engine
           - qcom,sm8550-inline-crypto-engine
           - qcom,sm8650-inline-crypto-engine
diff --git a/Bindings/crypto/qcom-qce.yaml b/Bindings/crypto/qcom-qce.yaml
index a48bd38..e285e38 100644
--- a/Bindings/crypto/qcom-qce.yaml
+++ b/Bindings/crypto/qcom-qce.yaml
@@ -45,6 +45,7 @@
       - items:
           - enum:
               - qcom,sc7280-qce
+              - qcom,sm6350-qce
               - qcom,sm8250-qce
               - qcom,sm8350-qce
               - qcom,sm8450-qce
diff --git a/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml
new file mode 100644
index 0000000..29ed424
--- /dev/null
+++ b/Bindings/display/atmel/atmel,hlcdc-display-controller.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's High LCD Controller (HLCDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image
+  data from an external display buffer to a TFT LCD panel. The LCDC has one
+  display input buffer per layer that fetches pixels through the single bus
+  host interface and a look-up table to allow palletized display
+  configurations.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-display-controller
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        description:
+          Endpoint connecting the LCD panel signals.
+
+        properties:
+          bus-width:
+            enum: [ 12, 16, 18, 24 ]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - port@0
+
+additionalProperties: false
diff --git a/Bindings/display/atmel/hlcdc-dc.txt b/Bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 923aea2..0000000
--- a/Bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph representation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
-   override any output mode selection heuristic, forcing "rgb444",
-   "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
-	&hlcdc {
-		hlcdc-display-controller {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-			port@0 {
-				hlcdc_panel_output: endpoint@0 {
-					bus-width = <16>;
-				};
-			};
-		};
-	};
diff --git a/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
new file mode 100644
index 0000000..3791c9f
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DWC HDMI TX Encoder
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMI transmitter is a Synopsys DesignWare
+  HDMI 2.0a TX controller IP.
+
+allOf:
+  - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-tx
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: iahb
+      - const: isfr
+      - const: cec
+      - const: pix
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hdmi@32fd8000 {
+        compatible = "fsl,imx8mp-hdmi-tx";
+        reg = <0x32fd8000 0x7eff>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_32K>,
+                 <&hdmi_tx_phy>;
+        clock-names = "iahb", "isfr", "cec", "pix";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+        reg-io-width = <1>;
+        ports {
+           #address-cells = <1>;
+           #size-cells = <0>;
+           port@0 {
+             reg = <0>;
+
+             hdmi_tx_from_pvi: endpoint {
+               remote-endpoint = <&pvi_to_hdmi_tx>;
+             };
+          };
+
+          port@1 {
+            reg = <1>;
+              hdmi_tx_out: endpoint {
+                remote-endpoint = <&hdmi0_con>;
+              };
+          };
+        };
+    };
diff --git a/Bindings/display/bridge/ti,sn65dsi86.yaml b/Bindings/display/bridge/ti,sn65dsi86.yaml
index 6ec6d28..c93878b 100644
--- a/Bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Bindings/display/bridge/ti,sn65dsi86.yaml
@@ -7,7 +7,7 @@
 title: SN65DSI86 DSI to eDP bridge chip
 
 maintainers:
-  - Sandeep Panda <spanda@codeaurora.org>
+  - Douglas Anderson <dianders@chromium.org>
 
 description: |
   The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
diff --git a/Bindings/display/fsl,lcdif.yaml b/Bindings/display/fsl,lcdif.yaml
index 1c2be8d..0681fc4 100644
--- a/Bindings/display/fsl,lcdif.yaml
+++ b/Bindings/display/fsl,lcdif.yaml
@@ -123,10 +123,16 @@
   - if:
       properties:
         compatible:
+          const: fsl,imx6sx-lcdif
+    then:
+      required:
+        - power-domains
+  - if:
+      properties:
+        compatible:
           contains:
             enum:
               - fsl,imx6sl-lcdif
-              - fsl,imx6sx-lcdif
               - fsl,imx8mm-lcdif
               - fsl,imx8mn-lcdif
               - fsl,imx8mp-lcdif
diff --git a/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
new file mode 100644
index 0000000..56da163
--- /dev/null
+++ b/Bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Video Interface
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The HDMI parallel video interface is a timing and sync generator block in the
+  i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-hdmi-pvi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from the LCDIF controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output to the HDMI TX controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    display-bridge@32fc4000 {
+        compatible = "fsl,imx8mp-hdmi-pvi";
+        reg = <0x32fc4000 0x44>;
+        interrupt-parent = <&irqsteer_hdmi>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                pvi_from_lcdif3: endpoint {
+                    remote-endpoint = <&lcdif3_to_pvi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                pvi_to_hdmi_tx: endpoint {
+                    remote-endpoint = <&hdmi_tx_from_pvi>;
+                };
+            };
+        };
+    };
diff --git a/Bindings/display/msm/dsi-controller-main.yaml b/Bindings/display/msm/dsi-controller-main.yaml
index 4219936..1fa28e9 100644
--- a/Bindings/display/msm/dsi-controller-main.yaml
+++ b/Bindings/display/msm/dsi-controller-main.yaml
@@ -19,6 +19,7 @@
               - qcom,msm8916-dsi-ctrl
               - qcom,msm8953-dsi-ctrl
               - qcom,msm8974-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
               - qcom,msm8996-dsi-ctrl
               - qcom,msm8998-dsi-ctrl
               - qcom,qcm2290-dsi-ctrl
@@ -248,6 +249,7 @@
           contains:
             enum:
               - qcom,msm8953-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
     then:
       properties:
         clocks:
diff --git a/Bindings/display/msm/gmu.yaml b/Bindings/display/msm/gmu.yaml
index 4e1c25b..b383736 100644
--- a/Bindings/display/msm/gmu.yaml
+++ b/Bindings/display/msm/gmu.yaml
@@ -224,6 +224,7 @@
             enum:
               - qcom,adreno-gmu-730.1
               - qcom,adreno-gmu-740.1
+              - qcom,adreno-gmu-750.1
     then:
       properties:
         reg:
diff --git a/Bindings/display/msm/gpu.yaml b/Bindings/display/msm/gpu.yaml
index b019db9..40b5c6b 100644
--- a/Bindings/display/msm/gpu.yaml
+++ b/Bindings/display/msm/gpu.yaml
@@ -23,7 +23,7 @@
           The driver is parsing the compat string for Adreno to
           figure out the gpu-id and patch level.
         items:
-          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$'
+          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Imageon to
@@ -127,7 +127,7 @@
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]+$'
 
     then:
       properties:
@@ -203,7 +203,7 @@
         properties:
           compatible:
             contains:
-              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$'
+              pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$'
 
       then: # Starting with A6xx, the clocks are usually defined in the GMU node
         properties:
diff --git a/Bindings/display/msm/qcom,mdss.yaml b/Bindings/display/msm/qcom,mdss.yaml
index 0999ea0..e457654 100644
--- a/Bindings/display/msm/qcom,mdss.yaml
+++ b/Bindings/display/msm/qcom,mdss.yaml
@@ -127,6 +127,7 @@
           - qcom,dsi-phy-20nm
           - qcom,dsi-phy-28nm-8226
           - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
           - qcom,dsi-phy-28nm-lp
           - qcom,hdmi-phy-8084
           - qcom,hdmi-phy-8660
diff --git a/Bindings/display/msm/qcom,sm8150-mdss.yaml b/Bindings/display/msm/qcom,sm8150-mdss.yaml
index c0d6a4f..e6dc549 100644
--- a/Bindings/display/msm/qcom,sm8150-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -53,6 +53,15 @@
       compatible:
         const: qcom,sm8150-dpu
 
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8150-dp
+
   "^dsi@[0-9a-f]+$":
     type: object
     additionalProperties: true
diff --git a/Bindings/display/msm/qcom,sm8650-dpu.yaml b/Bindings/display/msm/qcom,sm8650-dpu.yaml
index a01d15a..c4087cc 100644
--- a/Bindings/display/msm/qcom,sm8650-dpu.yaml
+++ b/Bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -13,7 +13,9 @@
 
 properties:
   compatible:
-    const: qcom,sm8650-dpu
+    enum:
+      - qcom,sm8650-dpu
+      - qcom,x1e80100-dpu
 
   reg:
     items:
diff --git a/Bindings/display/msm/qcom,sm8650-mdss.yaml b/Bindings/display/msm/qcom,sm8650-mdss.yaml
index bd11119..24cece1 100644
--- a/Bindings/display/msm/qcom,sm8650-mdss.yaml
+++ b/Bindings/display/msm/qcom,sm8650-mdss.yaml
@@ -37,18 +37,21 @@
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dpu
 
   "^displayport-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dp
 
   "^dsi@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         items:
@@ -57,6 +60,7 @@
 
   "^phy@[0-9a-f]+$":
     type: object
+    additionalProperties: true
     properties:
       compatible:
         const: qcom,sm8650-dsi-phy-4nm
diff --git a/Bindings/display/msm/qcom,x1e80100-mdss.yaml b/Bindings/display/msm/qcom,x1e80100-mdss.yaml
new file mode 100644
index 0000000..3b01a0e
--- /dev/null
+++ b/Bindings/display/msm/qcom,x1e80100-mdss.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Display MDSS
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,x1e80100-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,x1e80100-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,x1e80100-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,x1e80100-dp";
+            reg = <0 0xae90000 0 0x200>,
+                  <0 0xae90200 0 0x200>,
+                  <0 0xae90400 0 0x600>,
+                  <0 0xae91000 0 0x400>,
+                  <0 0xae91400 0 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+               <&dispcc_dptx0_aux_clk>,
+               <&dispcc_dptx0_link_clk>,
+               <&dispcc_dptx0_link_intf_clk>,
+               <&dispcc_dptx0_pixel0_clk>;
+            clock-names = "core_iface", "core_aux",
+                    "ctrl_link",
+                    "ctrl_link_iface",
+                    "stream_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                  <&dispcc_mdss_dptx0_pixel0_clk_src>;
+            assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                  <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            operating-points-v2 = <&mdss_dp0_opp_table>;
+
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                  reg = <0>;
+
+                  mdss_dp0_in: endpoint {
+                    remote-endpoint = <&mdss_intf0_out>;
+                  };
+              };
+
+              port@1 {
+                  reg = <1>;
+
+                  mdss_dp0_out: endpoint {
+                  };
+              };
+            };
+
+            mdss_dp0_opp_table: opp-table {
+              compatible = "operating-points-v2";
+
+              opp-160000000 {
+                 opp-hz = /bits/ 64 <160000000>;
+                 required-opps = <&rpmhpd_opp_low_svs>;
+              };
+
+              opp-270000000 {
+                 opp-hz = /bits/ 64 <270000000>;
+                 required-opps = <&rpmhpd_opp_svs>;
+              };
+
+              opp-540000000 {
+                 opp-hz = /bits/ 64 <540000000>;
+                 required-opps = <&rpmhpd_opp_svs_l1>;
+              };
+
+              opp-810000000 {
+                 opp-hz = /bits/ 64 <810000000>;
+                 required-opps = <&rpmhpd_opp_nom>;
+              };
+            };
+        };
+    };
+...
diff --git a/Bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
new file mode 100644
index 0000000..32df26c
--- /dev/null
+++ b/Bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+  - Manuel Traut <manut@mecka.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+      - boe,th101mb31ig002-28a
+
+  reg: true
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,th101mb31ig002-28a";
+            reg = <0>;
+            backlight = <&backlight_lcd0>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            power-supply = <&vcc_3v3>;
+            port {
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/panel/himax,hx83112a.yaml b/Bindings/display/panel/himax,hx83112a.yaml
new file mode 100644
index 0000000..174661d
--- /dev/null
+++ b/Bindings/display/panel/himax,hx83112a.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112A-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  The Himax HX83112A is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,9a-3r063-1102b
+
+  vdd1-supply:
+    description: Digital voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+  reg: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd1-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,9a-3r063-1102b";
+            reg = <0>;
+
+            backlight = <&pm6150l_wled>;
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            vdd1-supply = <&vreg_l1e>;
+            vsn-supply = <&pm6150l_lcdb_ncp>;
+            vsp-supply = <&pm6150l_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
index c5944b4..d589f16 100644
--- a/Bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -14,7 +14,9 @@
 
 properties:
   compatible:
-    const: leadtek,ltk500hd1829
+    enum:
+      - leadtek,ltk101b4029w
+      - leadtek,ltk500hd1829
   reg: true
   backlight: true
   reset-gpios: true
diff --git a/Bindings/display/panel/novatek,nt35510.yaml b/Bindings/display/panel/novatek,nt35510.yaml
index bc92928..91921f4 100644
--- a/Bindings/display/panel/novatek,nt35510.yaml
+++ b/Bindings/display/panel/novatek,nt35510.yaml
@@ -15,7 +15,9 @@
 properties:
   compatible:
     items:
-      - const: hydis,hva40wv1
+      - enum:
+          - frida,frd400b25025
+          - hydis,hva40wv1
       - const: novatek,nt35510
     description: This indicates the panel manufacturer of the panel
       that is in turn using the NT35510 panel driver. The compatible
@@ -29,6 +31,7 @@
   vddi-supply:
     description: regulator that supplies the vddi voltage
   backlight: true
+  port: true
 
 required:
   - compatible
diff --git a/Bindings/display/panel/novatek,nt36672e.yaml b/Bindings/display/panel/novatek,nt36672e.yaml
new file mode 100644
index 0000000..dc4672f
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt36672e.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672E LCD DSI Panel
+
+maintainers:
+  - Ritesh Kumar <quic_riteshk@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt36672e
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply: true
+  avdd-supply: true
+  avee-supply: true
+  port: true
+  reset-gpios: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddi-supply
+  - avdd-supply
+  - avee-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "novatek,nt36672e";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+            vddi-supply = <&vreg_l8c_1p8>;
+            avdd-supply = <&disp_avdd>;
+            avee-supply = <&disp_avee>;
+
+            backlight = <&pwm_backlight>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Bindings/display/panel/panel-lvds.yaml b/Bindings/display/panel/panel-lvds.yaml
index 9f10165..155d8ff 100644
--- a/Bindings/display/panel/panel-lvds.yaml
+++ b/Bindings/display/panel/panel-lvds.yaml
@@ -39,9 +39,13 @@
   compatible:
     items:
       - enum:
+          # Admatec 9904379 10.1" 1024x600 LVDS panel
+          - admatec,9904379
           - auo,b101ew05
           # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
           - chunghwa,claa070wp03xg
+          # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel
+          - edt,etml0700z9ndha
           # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
           - hannstar,hsd101pww2
           # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
index 634a10c..a95445f 100644
--- a/Bindings/display/panel/panel-simple.yaml
+++ b/Bindings/display/panel/panel-simple.yaml
@@ -73,6 +73,8 @@
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel
+      - boe,bp082wx1-100
         # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
       - boe,bp101wx1-100
         # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
@@ -141,6 +143,8 @@
       - edt,etm0700g0edh6
         # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
       - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch
+      - edt,etml1010g3dra
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
         # capacitive touch
       - edt,etmv570g2dhu
diff --git a/Bindings/display/panel/rocktech,jh057n00900.yaml b/Bindings/display/panel/rocktech,jh057n00900.yaml
index 97cccd8..6ec4712 100644
--- a/Bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Bindings/display/panel/rocktech,jh057n00900.yaml
@@ -22,6 +22,8 @@
     enum:
       # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
       - anbernic,rg353v-panel-v2
+      # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
+      - powkiddy,rgb10max3-panel
       # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
       - powkiddy,rgb30-panel
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
@@ -43,6 +45,7 @@
   reset-gpios: true
 
   backlight: true
+  rotation: true
 
 required:
   - compatible
diff --git a/Bindings/display/panel/visionox,r66451.yaml b/Bindings/display/panel/visionox,r66451.yaml
index 6ba3236..187840b 100644
--- a/Bindings/display/panel/visionox,r66451.yaml
+++ b/Bindings/display/panel/visionox,r66451.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
diff --git a/Bindings/display/panel/visionox,rm69299.yaml b/Bindings/display/panel/visionox,rm69299.yaml
index fa745a6..7723990 100644
--- a/Bindings/display/panel/visionox,rm69299.yaml
+++ b/Bindings/display/panel/visionox,rm69299.yaml
@@ -7,7 +7,8 @@
 title: Visionox model RM69299 Panels
 
 maintainers:
-  - Harigovindan P <harigovi@codeaurora.org>
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
+  - Jessica Zhang <quic_jesszhan@quicinc.com>
 
 description: |
   This binding is for display panels using a Visionox RM692999 panel.
diff --git a/Bindings/display/renesas,rzg2l-du.yaml b/Bindings/display/renesas,rzg2l-du.yaml
new file mode 100644
index 0000000..08e5b94
--- /dev/null
+++ b/Bindings/display/renesas,rzg2l-du.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Display Unit (DU)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
+  and RZ/V2L SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-du # RZ/G2{L,LC}
+      - items:
+          - enum:
+              - renesas,r9a07g054-du    # RZ/V2L
+          - const: renesas,r9a07g044-du # RZ/G2L fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings. The number of ports and their assignment are
+      model-dependent. Each port shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+  renesas,vsps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - ports
+  - renesas,vsps
+
+additionalProperties: false
+
+examples:
+  # RZ/G2L DU
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@10890000 {
+        compatible = "renesas,r9a07g044-du";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+        clock-names = "aclk", "pclk", "vclk";
+        resets = <&cpg R9A07G044_LCDC_RESET_N>;
+        power-domains = <&cpg>;
+
+        renesas,vsps = <&vspd0 0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
index 7e59dee..af638b6 100644
--- a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -94,11 +94,14 @@
       - const: default
       - const: unwedge
 
+  power-domains:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    patternProperties:
-      "^port(@0)?$":
+    properties:
+      port@0:
         $ref: /schemas/graph.yaml#/properties/port
         description: Input of the DWC HDMI TX
         properties:
@@ -108,11 +111,14 @@
             description: Connection to the VOPB
           endpoint@1:
             description: Connection to the VOPL
-    properties:
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: Output of the DWC HDMI TX
 
+    required:
+      - port@0
+      - port@1
+
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -135,19 +141,25 @@
     #include <dt-bindings/clock/rk3288-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3288-power.h>
 
     hdmi: hdmi@ff980000 {
         compatible = "rockchip,rk3288-dw-hdmi";
         reg = <0xff980000 0x20000>;
         reg-io-width = <4>;
-        ddc-i2c-bus = <&i2c5>;
-        rockchip,grf = <&grf>;
         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
         clock-names = "iahb", "isfr";
+        ddc-i2c-bus = <&i2c5>;
+        power-domains = <&power RK3288_PD_VIO>;
+        rockchip,grf = <&grf>;
 
         ports {
-            port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
                 #address-cells = <1>;
                 #size-cells = <0>;
 
@@ -155,11 +167,20 @@
                     reg = <0>;
                     remote-endpoint = <&vopb_out_hdmi>;
                 };
+
                 hdmi_in_vopl: endpoint@1 {
                     reg = <1>;
                     remote-endpoint = <&vopl_out_hdmi>;
                 };
             };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_out_con: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
         };
     };
 
diff --git a/Bindings/display/solomon,ssd1307fb.yaml b/Bindings/display/solomon,ssd1307fb.yaml
index 3afbb52..153ff86 100644
--- a/Bindings/display/solomon,ssd1307fb.yaml
+++ b/Bindings/display/solomon,ssd1307fb.yaml
@@ -131,9 +131,9 @@
             const: sinowealth,sh1106
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -149,9 +149,9 @@
               - solomon,ssd1305
     then:
       properties:
-        width:
+        solomon,width:
           default: 132
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -167,9 +167,9 @@
               - solomon,ssd1306
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
@@ -185,9 +185,9 @@
               - solomon,ssd1307
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 39
         solomon,dclk-div:
           default: 2
@@ -205,9 +205,9 @@
               - solomon,ssd1309
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 64
         solomon,dclk-div:
           default: 1
diff --git a/Bindings/display/solomon,ssd132x.yaml b/Bindings/display/solomon,ssd132x.yaml
index 37975ee..dd79399 100644
--- a/Bindings/display/solomon,ssd132x.yaml
+++ b/Bindings/display/solomon,ssd132x.yaml
@@ -30,9 +30,9 @@
             const: solomon,ssd1322
     then:
       properties:
-        width:
+        solomon,width:
           default: 480
-        height:
+        solomon,height:
           default: 128
 
   - if:
@@ -42,9 +42,9 @@
             const: solomon,ssd1325
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 80
 
   - if:
@@ -54,9 +54,9 @@
             const: solomon,ssd1327
     then:
       properties:
-        width:
+        solomon,width:
           default: 128
-        height:
+        solomon,height:
           default: 128
 
 unevaluatedProperties: false
diff --git a/Bindings/display/solomon,ssd133x.yaml b/Bindings/display/solomon,ssd133x.yaml
new file mode 100644
index 0000000..b778003
--- /dev/null
+++ b/Bindings/display/solomon,ssd133x.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd133x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD133x OLED Display Controllers
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - solomon,ssd1331
+
+  solomon,width:
+    default: 96
+
+  solomon,height:
+    default: 64
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        oled@0 {
+            compatible = "solomon,ssd1331";
+            reg = <0x0>;
+            reset-gpios = <&gpio2 7>;
+            dc-gpios = <&gpio2 8>;
+            spi-max-frequency = <10000000>;
+        };
+    };
diff --git a/Bindings/display/ti/ti,am65x-dss.yaml b/Bindings/display/ti/ti,am65x-dss.yaml
index b6767ef..55e3e49 100644
--- a/Bindings/display/ti/ti,am65x-dss.yaml
+++ b/Bindings/display/ti/ti,am65x-dss.yaml
@@ -37,6 +37,7 @@
       - description: OVR2 overlay manager for vp2
       - description: VP1 video port 1
       - description: VP2 video port 2
+      - description: common1 DSS register area
 
   reg-names:
     items:
@@ -47,6 +48,7 @@
       - const: ovr2
       - const: vp1
       - const: vp2
+      - const: common1
 
   clocks:
     items:
@@ -147,9 +149,10 @@
                     <0x04a07000 0x1000>, /* ovr1 */
                     <0x04a08000 0x1000>, /* ovr2 */
                     <0x04a0a000 0x1000>, /* vp1 */
-                    <0x04a0b000 0x1000>; /* vp2 */
+                    <0x04a0b000 0x1000>, /* vp2 */
+                    <0x04a01000 0x1000>; /* common1 */
             reg-names = "common", "vidl1", "vid",
-                    "ovr1", "ovr2", "vp1", "vp2";
+                    "ovr1", "ovr2", "vp1", "vp2", "common1";
             ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
             power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
             clocks =        <&k3_clks 67 1>,
diff --git a/Bindings/dma/allwinner,sun50i-a64-dma.yaml b/Bindings/dma/allwinner,sun50i-a64-dma.yaml
index ec2d7a7..0f2501f 100644
--- a/Bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ b/Bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -28,6 +28,9 @@
       - items:
           - const: allwinner,sun8i-r40-dma
           - const: allwinner,sun50i-a64-dma
+      - items:
+          - const: allwinner,sun50i-h616-dma
+          - const: allwinner,sun50i-a100-dma
 
   reg:
     maxItems: 1
@@ -59,10 +62,11 @@
 if:
   properties:
     compatible:
-      enum:
-        - allwinner,sun20i-d1-dma
-        - allwinner,sun50i-a100-dma
-        - allwinner,sun50i-h6-dma
+      contains:
+        enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
 
 then:
   properties:
diff --git a/Bindings/dma/fsl,edma.yaml b/Bindings/dma/fsl,edma.yaml
index 437db0c..aa51d27 100644
--- a/Bindings/dma/fsl,edma.yaml
+++ b/Bindings/dma/fsl,edma.yaml
@@ -25,6 +25,7 @@
           - fsl,imx8qm-edma
           - fsl,imx93-edma3
           - fsl,imx93-edma4
+          - fsl,imx95-edma5
       - items:
           - const: fsl,ls1028a-edma
           - const: fsl,vf610-edma
@@ -83,6 +84,7 @@
               - fsl,imx8qm-edma
               - fsl,imx93-edma3
               - fsl,imx93-edma4
+              - fsl,imx95-edma5
     then:
       properties:
         "#dma-cells":
diff --git a/Bindings/dma/fsl,imx-sdma.yaml b/Bindings/dma/fsl,imx-sdma.yaml
index b95dd8d..37135fa 100644
--- a/Bindings/dma/fsl,imx-sdma.yaml
+++ b/Bindings/dma/fsl,imx-sdma.yaml
@@ -92,7 +92,8 @@
               description: needs firmware more than ver 2
           - Shared ASRC: 23
           - SAI: 24
-          - HDMI Audio: 25
+          - Multi SAI: 25
+          - HDMI Audio: 26
 
        The third cell: transfer priority ID
          enum:
diff --git a/Bindings/dma/marvell,mmp-dma.yaml b/Bindings/dma/marvell,mmp-dma.yaml
new file mode 100644
index 0000000..d447d52
--- /dev/null
+++ b/Bindings/dma/marvell,mmp-dma.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP DMA controller
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description:
+  Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pdma-1.0
+      - marvell,adma-1.0
+      - marvell,pxa910-squ
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for the controller, may be shared or one per DMA channel
+    minItems: 1
+
+  asram:
+    description:
+      A phandle to the SRAM pool
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#dma-channels':
+    deprecated: true
+
+  '#dma-requests':
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#dma-cells'
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,pdma-1.0
+    then:
+      properties:
+        asram: false
+    else:
+      required:
+        - asram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@d4000000 {
+        compatible = "marvell,pdma-1.0";
+        reg = <0xd4000000 0x10000>;
+        interrupts = <47>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
diff --git a/Bindings/dma/mediatek,mt7622-hsdma.yaml b/Bindings/dma/mediatek,mt7622-hsdma.yaml
new file mode 100644
index 0000000..3f1e120
--- /dev/null
+++ b/Bindings/dma/mediatek,mt7622-hsdma.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,mt7622-hsdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek High-Speed DMA Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-hsdma
+      - mediatek,mt7623-hsdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hsdma
+
+  power-domains:
+    maxItems: 1
+
+  "#dma-cells":
+    description: Channel number
+    const: 1
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    dma-controller@1b007000 {
+        compatible = "mediatek,mt7623-hsdma";
+        reg = <0x1b007000 0x1000>;
+        interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+        clock-names = "hsdma";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+        #dma-cells = <1>;
+    };
diff --git a/Bindings/dma/mmp-dma.txt b/Bindings/dma/mmp-dma.txt
deleted file mode 100644
index ec18bf0..0000000
--- a/Bindings/dma/mmp-dma.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MARVELL MMP DMA controller
-
-Marvell Peripheral DMA Controller
-Used platforms: pxa688, pxa910, pxa3xx, etc
-
-Required properties:
-- compatible: Should be "marvell,pdma-1.0"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for pdma device
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller (defaults
-  to 32 when not specified)
-- #dma-channels: deprecated
-- dma-requests: Number of DMA requestor lines supported by the controller
-  (defaults to 32 when not specified)
-- #dma-requests: deprecated
-
-"marvell,pdma-1.0"
-Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
-
-Examples:
-
-/*
- * Each channel has specific irq
- * ICU parse out irq channel from ICU register,
- * while DMA controller may not able to distinguish the irq channel
- * Using this method, interrupt-parent is required as demuxer
- * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
- * 18~21 is ADMA irq
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-	      interrupt-parent = <&intcmux32>;
-	      dma-channels = <16>;
-      };
-
-/*
- * One irq for all channels
- * Dmaengine driver (DMA controller) distinguish irq channel via
- * parsing internal register
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <47>;
-	      dma-channels = <16>;
-      };
-
-
-Marvell Two Channel DMA Controller used specifically for audio
-Used platforms: pxa688, pxa910
-
-Required properties:
-- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for dma device
-
-"marvell,adma-1.0" used on pxa688
-"marvell,pxa910-squ" used on pxa910
-
-Examples:
-
-/* each channel has specific irq */
-adma0: dma-controller@d42a0800 {
-	      compatible = "marvell,adma-1.0";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <18 19>;
-	      interrupt-parent = <&intcmux32>;
-      };
-
-/* One irq for all channels */
-squ: dma-controller@d42a0800 {
-	      compatible = "marvell,pxa910-squ";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <46>;
-      };
diff --git a/Bindings/dma/mtk-hsdma.txt b/Bindings/dma/mtk-hsdma.txt
deleted file mode 100644
index 4bb3173..0000000
--- a/Bindings/dma/mtk-hsdma.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-MediaTek High-Speed DMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:	Must be one of
-		  "mediatek,mt7622-hsdma": for MT7622 SoC
-		  "mediatek,mt7623-hsdma": for MT7623 SoC
-- reg:		Should contain the register's base address and length.
-- interrupts:	Should contain a reference to the interrupt used by this
-		device.
-- clocks:	Should be the clock specifiers corresponding to the entry in
-		clock-names property.
-- clock-names:	Should contain "hsdma" entries.
-- power-domains: Phandle to the power domain that the device is part of
-- #dma-cells: 	The length of the DMA specifier, must be <1>. This one cell
-		in dmas property of a client device represents the channel
-		number.
-Example:
-
-        hsdma: dma-controller@1b007000 {
-		compatible = "mediatek,mt7623-hsdma";
-		reg = <0 0x1b007000 0 0x1000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
-		clock-names = "hsdma";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		#dma-cells = <1>;
-	};
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/Bindings/dma/renesas,rcar-dmac.yaml b/Bindings/dma/renesas,rcar-dmac.yaml
index 03aa067..04fc4a9 100644
--- a/Bindings/dma/renesas,rcar-dmac.yaml
+++ b/Bindings/dma/renesas,rcar-dmac.yaml
@@ -46,6 +46,7 @@
               - renesas,dmac-r8a779a0     # R-Car V3U
               - renesas,dmac-r8a779f0     # R-Car S4-8
               - renesas,dmac-r8a779g0     # R-Car V4H
+              - renesas,dmac-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-dmac # R-Car Gen4
 
   reg: true
diff --git a/Bindings/dts-coding-style.rst b/Bindings/dts-coding-style.rst
index a9bdd2b..8a68331 100644
--- a/Bindings/dts-coding-style.rst
+++ b/Bindings/dts-coding-style.rst
@@ -144,6 +144,8 @@
 		#dma-cells = <1>;
 		clocks = <&clock_controller 0>, <&clock_controller 1>;
 		clock-names = "bus", "host";
+		#address-cells = <1>;
+		#size-cells = <1>;
 		vendor,custom-property = <2>;
 		status = "disabled";
 
diff --git a/Bindings/eeprom/at24.yaml b/Bindings/eeprom/at24.yaml
index 1812ef3..3c36cd0 100644
--- a/Bindings/eeprom/at24.yaml
+++ b/Bindings/eeprom/at24.yaml
@@ -69,14 +69,10 @@
               - items:
                   pattern: c32$
               - items:
-                  pattern: c32d-wl$
-              - items:
                   pattern: cs32$
               - items:
                   pattern: c64$
               - items:
-                  pattern: c64d-wl$
-              - items:
                   pattern: cs64$
               - items:
                   pattern: c128$
@@ -136,6 +132,7 @@
               - renesas,r1ex24128
               - samsung,s524ad0xd1
           - const: atmel,24c128
+      - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st
 
   label:
     description: Descriptive name of the EEPROM.
diff --git a/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index 8e58485..ab8f32c 100644
--- a/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -26,6 +26,12 @@
       - description: For implementations complying for Versal.
         const: xlnx,versal-firmware
 
+      - description: For implementations complying for Versal NET.
+        items:
+          - enum:
+              - xlnx,versal-net-firmware
+          - const: xlnx,versal-firmware
+
   method:
     description: |
                  The method of calling the PM-API firmware layer.
@@ -41,7 +47,53 @@
   "#power-domain-cells":
     const: 1
 
-  versal_fpga:
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+  gpio:
+    $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+    description: The gpio node describes connect to PS_MODE pins via firmware
+      interface.
+    type: object
+
+  soc-nvmem:
+    $ref: /schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+    description: The ZynqMP MPSoC provides access to the hardware related data
+      like SOC revision, IDCODE and specific purpose efuses.
+    type: object
+
+  pcap:
+    $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml
+    description: The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+      configure the Programmable Logic (PL). The configuration uses the
+      firmware interface.
+    type: object
+
+  pinctrl:
+    $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+    description: The pinctrl node provides access to pinconfig and pincontrol
+      functionality available in firmware.
+    type: object
+
+  power-management:
+    $ref: /schemas/power/reset/xlnx,zynqmp-power.yaml#
+    description: The zynqmp-power node describes the power management
+      configurations. It will control remote suspend/shutdown interfaces.
+    type: object
+
+  reset-controller:
+    $ref: /schemas/reset/xlnx,zynqmp-reset.yaml#
+    description: The reset-controller node describes connection to the reset
+      functionality via firmware interface.
+    type: object
+
+  versal-fpga:
     $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
     description: Compatible of the FPGA device.
     type: object
@@ -53,15 +105,6 @@
       vector.
     type: object
 
-  clock-controller:
-    $ref: /schemas/clock/xlnx,versal-clk.yaml#
-    description: The clock controller is a hardware block of Xilinx versal
-      clock tree. It reads required input clock frequencies from the devicetree
-      and acts as clock provider for all clock consumers of PS clocks.list of
-      clock specifiers which are external input clocks to the given clock
-      controller.
-    type: object
-
 required:
   - compatible
 
@@ -73,7 +116,38 @@
     firmware {
       zynqmp_firmware: zynqmp-firmware {
         #power-domain-cells = <1>;
+        soc-nvmem {
+          compatible = "xlnx,zynqmp-nvmem-fw";
+          nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+          };
         };
+        gpio {
+          compatible = "xlnx,zynqmp-gpio-modepin";
+          gpio-controller;
+          #gpio-cells = <2>;
+        };
+        pcap {
+          compatible = "xlnx,zynqmp-pcap-fpga";
+        };
+        pinctrl {
+          compatible = "xlnx,zynqmp-pinctrl";
+        };
+        power-management {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+        reset-controller {
+          compatible = "xlnx,zynqmp-reset";
+          #reset-cells = <1>;
+        };
+      };
     };
 
     sata {
@@ -84,7 +158,7 @@
       compatible = "xlnx,versal-firmware";
       method = "smc";
 
-      versal_fpga: versal_fpga {
+      versal_fpga: versal-fpga {
         compatible = "xlnx,versal-fpga";
       };
 
diff --git a/Bindings/fpga/fpga-region.txt b/Bindings/fpga/fpga-region.txt
deleted file mode 100644
index 528df8a..0000000
--- a/Bindings/fpga/fpga-region.txt
+++ /dev/null
@@ -1,479 +0,0 @@
-FPGA Region Device Tree Binding
-
-Alan Tull 2016
-
- CONTENTS
- - Introduction
- - Terminology
- - Sequence
- - FPGA Region
- - Supported Use Models
- - Device Tree Examples
- - Constraints
-
-
-Introduction
-============
-
-FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
-the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
-control.
-
-This device tree binding document hits some of the high points of FPGA usage and
-attempts to include terminology used by both major FPGA manufacturers.  This
-document isn't a replacement for any manufacturers specifications for FPGA
-usage.
-
-
-Terminology
-===========
-
-Full Reconfiguration
- * The entire FPGA is programmed.
-
-Partial Reconfiguration (PR)
- * A section of an FPGA is reprogrammed while the rest of the FPGA is not
-   affected.
- * Not all FPGA's support PR.
-
-Partial Reconfiguration Region (PRR)
- * Also called a "reconfigurable partition"
- * A PRR is a specific section of an FPGA reserved for reconfiguration.
- * A base (or static) FPGA image may create a set of PRR's that later may
-   be independently reprogrammed many times.
- * The size and specific location of each PRR is fixed.
- * The connections at the edge of each PRR are fixed.  The image that is loaded
-   into a PRR must fit and must use a subset of the region's connections.
- * The busses within the FPGA are split such that each region gets its own
-   branch that may be gated independently.
-
-Persona
- * Also called a "partial bit stream"
- * An FPGA image that is designed to be loaded into a PRR.  There may be
-   any number of personas designed to fit into a PRR, but only one at at time
-   may be loaded.
- * A persona may create more regions.
-
-FPGA Bridge
- * FPGA Bridges gate bus signals between a host and FPGA.
- * FPGA Bridges should be disabled while the FPGA is being programmed to
-   prevent spurious signals on the cpu bus and to the soft logic.
- * FPGA bridges may be actual hardware or soft logic on an FPGA.
- * During Full Reconfiguration, hardware bridges between the host and FPGA
-   will be disabled.
- * During Partial Reconfiguration of a specific region, that region's bridge
-   will be used to gate the busses.  Traffic to other regions is not affected.
- * In some implementations, the FPGA Manager transparently handles gating the
-   buses, eliminating the need to show the hardware FPGA bridges in the
-   device tree.
- * An FPGA image may create a set of reprogrammable regions, each having its
-   own bridge and its own split of the busses in the FPGA.
-
-FPGA Manager
- * An FPGA Manager is a hardware block that programs an FPGA under the control
-   of a host processor.
-
-Base Image
- * Also called the "static image"
- * An FPGA image that is designed to do full reconfiguration of the FPGA.
- * A base image may set up a set of partial reconfiguration regions that may
-   later be reprogrammed.
-
-    ----------------       ----------------------------------
-    |  Host CPU    |       |             FPGA               |
-    |              |       |                                |
-    |          ----|       |       -----------    --------  |
-    |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
-    |          | W |       |   |   -----------    --------  |
-    |          |   |       |   |                            |
-    |          | B |<=====>|<==|   -----------    --------  |
-    |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
-    |          | I |       |   |   -----------    --------  |
-    |          | D |       |   |                            |
-    |          | G |       |   |   -----------    --------  |
-    |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
-    |          ----|       |       -----------    --------  |
-    |              |       |                                |
-    ----------------       ----------------------------------
-
-Figure 1: An FPGA set up with a base image that created three regions.  Each
-region (PRR0-2) gets its own split of the busses that is independently gated by
-a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
-reprogrammed independently while the rest of the system continues to function.
-
-
-Sequence
-========
-
-When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
-do the following:
-
- 1. Disable appropriate FPGA bridges.
- 2. Program the FPGA using the FPGA manager.
- 3. Enable the FPGA bridges.
- 4. The Device Tree overlay is accepted into the live tree.
- 5. Child devices are populated.
-
-When the overlay is removed, the child nodes will be removed and the FPGA Region
-will disable the bridges.
-
-
-FPGA Region
-===========
-
-FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
-Region brings together the elements needed to program on a running system and
-add the child devices:
-
- * FPGA Manager
- * FPGA Bridges
- * image-specific information needed to to the programming.
- * child nodes
-
-The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
-FPGA while an operating system is running.
-
-An FPGA Region that exists in the live Device Tree reflects the current state.
-If the live tree shows a "firmware-name" property or child nodes under an FPGA
-Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
-and adds the "firmware-name" property is taken as a request to reprogram the
-FPGA.  After reprogramming is successful, the overlay is accepted into the live
-tree.
-
-The base FPGA Region in the device tree represents the FPGA and supports full
-reconfiguration.  It must include a phandle to an FPGA Manager.  The base
-FPGA region will be the child of one of the hardware bridges (the bridge that
-allows register access) between the cpu and the FPGA.  If there are more than
-one bridge to control during FPGA programming, the region will also contain a
-list of phandles to the additional hardware FPGA Bridges.
-
-For partial reconfiguration (PR), each PR region will have an FPGA Region.
-These FPGA regions are children of FPGA bridges which are then children of the
-base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
-this.
-
-If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
-Manager specified by its ancestor FPGA Region.  This supports both the case
-where the same FPGA Manager is used for all of an FPGA as well the case where
-a different FPGA Manager is used for each region.
-
-FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
-shutting down bridges that are upstream from the other active regions while one
-region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
-hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
-within the static image of the FPGA.
-
-Required properties:
-- compatible : should contain "fpga-region"
-- fpga-mgr : should contain a phandle to an FPGA Manager.  Child FPGA Regions
-	inherit this property from their ancestor regions.  An fpga-mgr property
-	in a region will override any inherited FPGA manager.
-- #address-cells, #size-cells, ranges : must be present to handle address space
-	mapping for child nodes.
-
-Optional properties:
-- firmware-name : should contain the name of an FPGA image file located on the
-	firmware search path.  If this property shows up in a live device tree
-	it indicates that the FPGA has already been programmed with this image.
-	If this property is in an overlay targeting an FPGA region, it is a
-	request to program the FPGA with that image.
-- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
-	controlled during FPGA programming along with the parent FPGA bridge.
-	This property is optional if the FPGA Manager handles the bridges.
-        If the fpga-region is  the child of an fpga-bridge, the list should not
-        contain the parent bridge.
-- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
-	otherwise full reconfiguration is done.
-- external-fpga-config : boolean, set if the FPGA has already been configured
-	prior to OS boot up.
-- encrypted-fpga-config : boolean, set if the bitstream is encrypted
-- region-unfreeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become enabled after the region has been
-	programmed.
-- region-freeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become disabled before the region has been
-	programmed.
-- config-complete-timeout-us : The maximum time in microseconds time for the
-	FPGA to go to operating mode after the region has been programmed.
-- child nodes : devices in the FPGA after programming.
-
-In the example below, when an overlay is applied targeting fpga-region0,
-fpga_mgr is used to program the FPGA.  Two bridges are controlled during
-programming: the parent fpga_bridge0 and fpga_bridge1.  Because the region is
-the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the
-fpga-bridges property.  During programming, these bridges are disabled, the
-firmware specified in the overlay is loaded to the FPGA using the FPGA manager
-specified in the region.  If FPGA programming succeeds, the bridges are
-reenabled and the overlay makes it into the live device tree.  The child devices
-are then populated.  If FPGA programming fails, the bridges are left disabled
-and the overlay is rejected.  The overlay's ranges property maps the lwhps
-bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by
-the two child devices.
-
-Example:
-Base tree contains:
-
-	fpga_mgr: fpga-mgr@ff706000 {
-		compatible = "altr,socfpga-fpga-mgr";
-		reg = <0xff706000 0x1000
-		       0xffb90000 0x20>;
-		interrupts = <0 175 4>;
-	};
-
-	fpga_bridge0: fpga-bridge@ff400000 {
-		compatible = "altr,socfpga-lwhps2fpga-bridge";
-		reg = <0xff400000 0x100000>;
-		resets = <&rst LWHPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fpga_region0: fpga-region0 {
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-	};
-
-	fpga_bridge1: fpga-bridge@ff500000 {
-		compatible = "altr,socfpga-hps2fpga-bridge";
-		reg = <0xff500000 0x10000>;
-		resets = <&rst HPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-	};
-
-Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_system.rbf";
-	fpga-bridges = <&fpga_bridge1>;
-	ranges = <0x20000 0xff200000 0x100000>,
-		 <0x0 0xc0000000 0x20000000>;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		altr,ngpio = <4>;
-		#gpio-cells = <2>;
-		clocks = <2>;
-		gpio-controller;
-	};
-
-	onchip-memory {
-		device_type = "memory";
-		compatible = "altr,onchipmem-15.1";
-		reg = <0x0 0x10000>;
-	};
-};
-
-
-Supported Use Models
-====================
-
-In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
-a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
-uses are specific to an FPGA device.
-
- * No FPGA Bridges
-   In this case, the FPGA Manager which programs the FPGA also handles the
-   bridges behind the scenes.  No FPGA Bridge devices are needed for full
-   reconfiguration.
-
- * Full reconfiguration with hardware bridges
-   In this case, there are hardware bridges between the processor and FPGA that
-   need to be controlled during full reconfiguration.  Before the overlay is
-   applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
-   FPGA Region.  The FPGA Region is the child of the bridge that allows
-   register access to the FPGA.  Additional bridges may be listed in a
-   fpga-bridges property in the FPGA region or in the device tree overlay.
-
- * Partial reconfiguration with bridges in the FPGA
-   In this case, the FPGA will have one or more PRR's that may be programmed
-   separately while the rest of the FPGA can remain active.  To manage this,
-   bridges need to exist in the FPGA that can gate the buses going to each FPGA
-   region while the buses are enabled for other sections.  Before any partial
-   reconfiguration can be done, a base FPGA image must be loaded which includes
-   PRR's with FPGA bridges.  The device tree should have an FPGA region for each
-   PRR.
-
-Device Tree Examples
-====================
-
-The intention of this section is to give some simple examples, focusing on
-the placement of the elements detailed above, especially:
- * FPGA Manager
- * FPGA Bridges
- * FPGA Region
- * ranges
- * target-path or target
-
-For the purposes of this section, I'm dividing the Device Tree into two parts,
-each with its own requirements.  The two parts are:
- * The live DT prior to the overlay being added
- * The DT overlay
-
-The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA
-Bridges.  The FPGA Region's "fpga-mgr" property specifies the manager by phandle
-to handle programming the FPGA.  If the FPGA Region is the child of another FPGA
-Region, the parent's FPGA Manager is used.  If FPGA Bridges need to be involved,
-they are specified in the FPGA Region by the "fpga-bridges" property.  During
-FPGA programming, the FPGA Region will disable the bridges that are in its
-"fpga-bridges" list and will re-enable them after FPGA programming has
-succeeded.
-
-The Device Tree Overlay will contain:
- * "target-path" or "target"
-   The insertion point where the contents of the overlay will go into the
-   live tree.  target-path is a full path, while target is a phandle.
- * "ranges"
-    The address space mapping from processor to FPGA bus(ses).
- * "firmware-name"
-   Specifies the name of the FPGA image file on the firmware search
-   path.  The search path is described in the firmware class documentation.
- * "partial-fpga-config"
-   This binding is a boolean and should be present if partial reconfiguration
-   is to be done.
- * child nodes corresponding to hardware that will be loaded in this region of
-   the FPGA.
-
-Device Tree Example: Full Reconfiguration without Bridges
-=========================================================
-
-Live Device Tree contains:
-	fpga_mgr0: fpga-mgr@f8007000 {
-		compatible = "xlnx,zynq-devcfg-1.0";
-		reg = <0xf8007000 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 8 4>;
-		clocks = <&clkc 12>;
-		clock-names = "ref_clk";
-		syscon = <&slcr>;
-	};
-
-	fpga_region0: fpga-region0 {
-		compatible = "fpga-region";
-		fpga-mgr = <&fpga_mgr0>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-	};
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "zynq-gpio.bin";
-
-	gpio1: gpio@40000000 {
-		compatible = "xlnx,xps-gpio-1.00.a";
-		reg = <0x40000000 0x10000>;
-		gpio-controller;
-		#gpio-cells = <0x2>;
-		xlnx,gpio-width= <0x6>;
-	};
-};
-
-Device Tree Example: Full Reconfiguration to add PRR's
-======================================================
-
-The base FPGA Region is specified similar to the first example above.
-
-This example programs the FPGA to have two regions that can later be partially
-configured.  Each region has its own bridge in the FPGA fabric.
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "base.rbf";
-
-	fpga-bridge@4400 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4400 0x10>;
-
-		fpga_region1: fpga-region1 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-
-	fpga-bridge@4420 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4420 0x10>;
-
-		fpga_region2: fpga-region2 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-};
-
-Device Tree Example: Partial Reconfiguration
-============================================
-
-This example reprograms one of the PRR's set up in the previous example.
-
-The sequence that occurs when this overlay is similar to the above, the only
-differences are that the FPGA is partially reconfigured due to the
-"partial-fpga-config" boolean and the only bridge that is controlled during
-programming is the FPGA based bridge of fpga_region1.
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region1 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_image2.rbf";
-	partial-fpga-config;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		clocks = <0x2>;
-		altr,ngpio = <0x4>;
-		#gpio-cells = <0x2>;
-		gpio-controller;
-	};
-};
-
-Constraints
-===========
-
-It is beyond the scope of this document to fully describe all the FPGA design
-constraints required to make partial reconfiguration work[1] [2] [3], but a few
-deserve quick mention.
-
-A persona must have boundary connections that line up with those of the partition
-or region it is designed to go into.
-
-During programming, transactions through those connections must be stopped and
-the connections must be held at a fixed logic level.  This can be achieved by
-FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
-
---
-[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
-[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
-[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
diff --git a/Bindings/fpga/fpga-region.yaml b/Bindings/fpga/fpga-region.yaml
new file mode 100644
index 0000000..7755488
--- /dev/null
+++ b/Bindings/fpga/fpga-region.yaml
@@ -0,0 +1,358 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-region.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Region
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  CONTENTS
+   - Introduction
+   - Terminology
+   - Sequence
+   - FPGA Region
+   - Supported Use Models
+   - Constraints
+
+
+  Introduction
+  ============
+
+  FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
+  the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
+  control.
+
+  The documentation hits some of the high points of FPGA usage and
+  attempts to include terminology used by both major FPGA manufacturers.  This
+  document isn't a replacement for any manufacturers specifications for FPGA
+  usage.
+
+
+  Terminology
+  ===========
+
+  Full Reconfiguration
+   * The entire FPGA is programmed.
+
+  Partial Reconfiguration (PR)
+   * A section of an FPGA is reprogrammed while the rest of the FPGA is not
+     affected.
+   * Not all FPGA's support PR.
+
+  Partial Reconfiguration Region (PRR)
+   * Also called a "reconfigurable partition"
+   * A PRR is a specific section of an FPGA reserved for reconfiguration.
+   * A base (or static) FPGA image may create a set of PRR's that later may
+     be independently reprogrammed many times.
+   * The size and specific location of each PRR is fixed.
+   * The connections at the edge of each PRR are fixed.  The image that is loaded
+     into a PRR must fit and must use a subset of the region's connections.
+   * The busses within the FPGA are split such that each region gets its own
+     branch that may be gated independently.
+
+  Persona
+   * Also called a "partial bit stream"
+   * An FPGA image that is designed to be loaded into a PRR.  There may be
+     any number of personas designed to fit into a PRR, but only one at a time
+     may be loaded.
+   * A persona may create more regions.
+
+  FPGA Bridge
+   * FPGA Bridges gate bus signals between a host and FPGA.
+   * FPGA Bridges should be disabled while the FPGA is being programmed to
+     prevent spurious signals on the cpu bus and to the soft logic.
+   * FPGA bridges may be actual hardware or soft logic on an FPGA.
+   * During Full Reconfiguration, hardware bridges between the host and FPGA
+     will be disabled.
+   * During Partial Reconfiguration of a specific region, that region's bridge
+     will be used to gate the busses.  Traffic to other regions is not affected.
+   * In some implementations, the FPGA Manager transparently handles gating the
+     buses, eliminating the need to show the hardware FPGA bridges in the
+     device tree.
+   * An FPGA image may create a set of reprogrammable regions, each having its
+     own bridge and its own split of the busses in the FPGA.
+
+  FPGA Manager
+   * An FPGA Manager is a hardware block that programs an FPGA under the control
+     of a host processor.
+
+  Base Image
+   * Also called the "static image"
+   * An FPGA image that is designed to do full reconfiguration of the FPGA.
+   * A base image may set up a set of partial reconfiguration regions that may
+     later be reprogrammed.
+
+      ----------------       ----------------------------------
+      |  Host CPU    |       |             FPGA               |
+      |              |       |                                |
+      |          ----|       |       -----------    --------  |
+      |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
+      |          | W |       |   |   -----------    --------  |
+      |          |   |       |   |                            |
+      |          | B |<=====>|<==|   -----------    --------  |
+      |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
+      |          | I |       |   |   -----------    --------  |
+      |          | D |       |   |                            |
+      |          | G |       |   |   -----------    --------  |
+      |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
+      |          ----|       |       -----------    --------  |
+      |              |       |                                |
+      ----------------       ----------------------------------
+
+  Figure 1: An FPGA set up with a base image that created three regions.  Each
+  region (PRR0-2) gets its own split of the busses that is independently gated by
+  a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
+  reprogrammed independently while the rest of the system continues to function.
+
+
+  Sequence
+  ========
+
+  When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
+  do the following:
+
+   1. Disable appropriate FPGA bridges.
+   2. Program the FPGA using the FPGA manager.
+   3. Enable the FPGA bridges.
+   4. The Device Tree overlay is accepted into the live tree.
+   5. Child devices are populated.
+
+  When the overlay is removed, the child nodes will be removed and the FPGA Region
+  will disable the bridges.
+
+
+  FPGA Region
+  ===========
+
+  FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
+  Region brings together the elements needed to program on a running system and
+  add the child devices:
+
+   * FPGA Manager
+   * FPGA Bridges
+   * image-specific information needed to the programming.
+   * child nodes
+
+  The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
+  FPGA while an operating system is running.
+
+  An FPGA Region that exists in the live Device Tree reflects the current state.
+  If the live tree shows a "firmware-name" property or child nodes under an FPGA
+  Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
+  and adds the "firmware-name" property is taken as a request to reprogram the
+  FPGA.  After reprogramming is successful, the overlay is accepted into the live
+  tree.
+
+  The base FPGA Region in the device tree represents the FPGA and supports full
+  reconfiguration.  It must include a phandle to an FPGA Manager.  The base
+  FPGA region will be the child of one of the hardware bridges (the bridge that
+  allows register access) between the cpu and the FPGA.  If there are more than
+  one bridge to control during FPGA programming, the region will also contain a
+  list of phandles to the additional hardware FPGA Bridges.
+
+  For partial reconfiguration (PR), each PR region will have an FPGA Region.
+  These FPGA regions are children of FPGA bridges which are then children of the
+  base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
+  this.
+
+  If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
+  Manager specified by its ancestor FPGA Region.  This supports both the case
+  where the same FPGA Manager is used for all of an FPGA as well the case where
+  a different FPGA Manager is used for each region.
+
+  FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
+  shutting down bridges that are upstream from the other active regions while one
+  region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
+  hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
+  within the static image of the FPGA.
+
+
+  Supported Use Models
+  ====================
+
+  In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
+  a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
+  uses are specific to an FPGA device.
+
+   * No FPGA Bridges
+     In this case, the FPGA Manager which programs the FPGA also handles the
+     bridges behind the scenes.  No FPGA Bridge devices are needed for full
+     reconfiguration.
+
+   * Full reconfiguration with hardware bridges
+     In this case, there are hardware bridges between the processor and FPGA that
+     need to be controlled during full reconfiguration.  Before the overlay is
+     applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
+     FPGA Region.  The FPGA Region is the child of the bridge that allows
+     register access to the FPGA.  Additional bridges may be listed in a
+     fpga-bridges property in the FPGA region or in the device tree overlay.
+
+   * Partial reconfiguration with bridges in the FPGA
+     In this case, the FPGA will have one or more PRR's that may be programmed
+     separately while the rest of the FPGA can remain active.  To manage this,
+     bridges need to exist in the FPGA that can gate the buses going to each FPGA
+     region while the buses are enabled for other sections.  Before any partial
+     reconfiguration can be done, a base FPGA image must be loaded which includes
+     PRR's with FPGA bridges.  The device tree should have an FPGA region for each
+     PRR.
+
+  Constraints
+  ===========
+
+  It is beyond the scope of this document to fully describe all the FPGA design
+  constraints required to make partial reconfiguration work[1] [2] [3], but a few
+  deserve quick mention.
+
+  A persona must have boundary connections that line up with those of the partition
+  or region it is designed to go into.
+
+  During programming, transactions through those connections must be stopped and
+  the connections must be held at a fixed logic level.  This can be achieved by
+  FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
+
+  --
+  [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
+  [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
+  [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
+
+properties:
+  $nodename:
+    pattern: "^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  compatible:
+    const: fpga-region
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+  "#address-cells": true
+  "#size-cells": true
+
+  config-complete-timeout-us:
+    description:
+      The maximum time in microseconds time for the FPGA to go to operating
+      mode after the region has been programmed.
+
+  encrypted-fpga-config:
+    type: boolean
+    description:
+      Set if the bitstream is encrypted.
+
+  external-fpga-config:
+    type: boolean
+    description:
+      Set if the FPGA has already been configured prior to OS boot up.
+
+  firmware-name:
+    maxItems: 1
+    description:
+      Should contain the name of an FPGA image file located on the firmware
+      search path. If this property shows up in a live device tree it indicates
+      that the FPGA has already been programmed with this image.
+      If this property is in an overlay targeting an FPGA region, it is
+      a request to program the FPGA with that image.
+
+  fpga-bridges:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles to FPGA Bridges that must be
+      controlled during FPGA programming along with the parent FPGA bridge.
+      This property is optional if the FPGA Manager handles the bridges.
+      If the fpga-region is  the child of an fpga-bridge, the list should not
+      contain the parent bridge.
+
+  fpga-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should contain a phandle to an FPGA Manager.  Child FPGA Regions
+      inherit this property from their ancestor regions.  An fpga-mgr property
+      in a region will override any inherited FPGA manager.
+
+  partial-fpga-config:
+    type: boolean
+    description:
+      Set if partial reconfiguration is to be done, otherwise full
+      reconfiguration is done.
+
+  region-freeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become disabled before the region has been programmed.
+
+  region-unfreeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become enabled after the region has been programmed.
+
+required:
+  - compatible
+  - fpga-mgr
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    /*
+     * Full Reconfiguration without Bridges with DT overlay
+     */
+    fpga_region0: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr0>;
+      ranges = <0x10000000 0x20000000 0x10000000>;
+
+      /* DT Overlay contains: &fpga_region0 */
+      firmware-name = "zynq-gpio.bin";
+      gpio@40000000 {
+        compatible = "xlnx,xps-gpio-1.00.a";
+        reg = <0x40000000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+      };
+    };
+
+  - |
+    /*
+     * Partial reconfiguration with bridge
+     */
+    fpga_region1: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      ranges;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr1>;
+      fpga-bridges = <&fpga_bridge1>;
+      partial-fpga-config;
+
+      /* DT Overlay contains: &fpga_region1 */
+      firmware-name = "zynq-gpio-partial.bin";
+      clk: clock {
+        compatible = "fixed-factor-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        clock-div = <2>;
+        clock-mult = <1>;
+      };
+      axi {
+        compatible = "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        gpio@40000000 {
+          compatible = "xlnx,xps-gpio-1.00.a";
+          reg = <0x40000000 0x10000>;
+          #gpio-cells = <2>;
+          gpio-controller;
+          clocks = <&clk>;
+        };
+      };
+    };
diff --git a/Bindings/fpga/xlnx,versal-fpga.yaml b/Bindings/fpga/xlnx,versal-fpga.yaml
index 26f1883..8083346 100644
--- a/Bindings/fpga/xlnx,versal-fpga.yaml
+++ b/Bindings/fpga/xlnx,versal-fpga.yaml
@@ -26,7 +26,7 @@
 
 examples:
   - |
-    versal_fpga: versal_fpga {
+    versal_fpga: versal-fpga {
          compatible = "xlnx,versal-fpga";
     };
 
diff --git a/Bindings/gpio/aspeed,ast2400-gpio.yaml b/Bindings/gpio/aspeed,ast2400-gpio.yaml
new file mode 100644
index 0000000..cf11aa7
--- /dev/null
+++ b/Bindings/gpio/aspeed,ast2400-gpio.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed GPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-gpio
+      - aspeed,ast2500-gpio
+      - aspeed,ast2600-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: The clock to use for debounce timings
+
+  gpio-controller: true
+  gpio-line-names:
+    minItems: 36
+    maxItems: 232
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ngpios:
+    minimum: 36
+    maximum: 232
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2400-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 220
+          maxItems: 220
+        ngpios:
+          const: 220
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2500-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 232
+          maxItems: 232
+        ngpios:
+          const: 232
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2600-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 208
+        ngpios:
+          enum: [ 36, 208 ]
+      required:
+        - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1e780000 {
+        compatible = "aspeed,ast2400-gpio";
+        reg = <0x1e780000 0x1000>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+  - |
+    gpio: gpio@1e780000 {
+        compatible = "aspeed,ast2500-gpio";
+        reg = <0x1e780000 0x200>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 232>;
+    };
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio@1e780000 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780000 0x400>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 208>;
+        ngpios = <208>;
+    };
+    gpio1: gpio@1e780800 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780800 0x800>;
+        clocks = <&syscon ASPEED_CLK_APB1>;
+        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 208 36>;
+        ngpios = <36>;
+    };
diff --git a/Bindings/gpio/gateworks,pld-gpio.txt b/Bindings/gpio/gateworks,pld-gpio.txt
index 6e81f8b..d543fd1 100644
--- a/Bindings/gpio/gateworks,pld-gpio.txt
+++ b/Bindings/gpio/gateworks,pld-gpio.txt
@@ -1,7 +1,6 @@
 Gateworks PLD GPIO controller bindings
 
-The GPIO controller should be a child node on an I2C bus,
-see: i2c/i2c.txt for details.
+The GPIO controller should be a child node on an I2C bus.
 
 Required properties:
 - compatible: Should be "gateworks,pld-gpio"
diff --git a/Bindings/gpio/gpio-aspeed.txt b/Bindings/gpio/gpio-aspeed.txt
deleted file mode 100644
index b2033fc..0000000
--- a/Bindings/gpio/gpio-aspeed.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Aspeed GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
-					or "aspeed,ast2600-gpio".
-
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-
-- reg			: Address and length of the register set for the device
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
-
-Optional properties:
-
-- clocks		: A phandle to the clock to use for debounce timings
-- ngpios		: Number of GPIOs controlled by this controller. Should	be set
-				  when there are multiple GPIO controllers on a SoC (ast2600).
-
-The gpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	gpio@1e780000 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2400-gpio";
-		gpio-controller;
-		interrupts = <20>;
-		reg = <0x1e780000 0x1000>;
-		interrupt-controller;
-	};
diff --git a/Bindings/gpio/gpio-mvebu.yaml b/Bindings/gpio/gpio-mvebu.yaml
index f1bd1e6..33d4e47 100644
--- a/Bindings/gpio/gpio-mvebu.yaml
+++ b/Bindings/gpio/gpio-mvebu.yaml
@@ -115,7 +115,7 @@
       required:
         - reg
 
-unevaluatedProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/gpio/gpio-nmk.txt b/Bindings/gpio/gpio-nmk.txt
deleted file mode 100644
index 8315ac7..0000000
--- a/Bindings/gpio/gpio-nmk.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Nomadik GPIO controller
-
-Required properties:
-- compatible            : Should be "st,nomadik-gpio".
-- reg                   : Physical base address and length of the controller's registers.
-- interrupts            : The interrupt outputs from the controller.
-- #gpio-cells           : Should be two:
-                            The first cell is the pin number.
-                            The second cell is used to specify optional parameters:
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered.
-                                  2 = high-to-low edge triggered.
-                                  4 = active high level-sensitive.
-                                  8 = active low level-sensitive.
-- gpio-controller       : Marks the device node as a GPIO controller.
-- interrupt-controller  : Marks the device node as an interrupt controller.
-- gpio-bank             : Specifies which bank a controller owns.
-- st,supports-sleepmode : Specifies whether controller can sleep or not
-
-Example:
-
-                gpio1: gpio@8012e080 {
-                        compatible = "st,nomadik-gpio";
-                        reg =  <0x8012e080 0x80>;
-                        interrupts = <0 120 0x4>;
-                        #gpio-cells = <2>;
-                        gpio-controller;
-                        interrupt-controller;
-                        st,supports-sleepmode;
-                        gpio-bank = <1>;
-                };
diff --git a/Bindings/gpio/gpio-pca9570.yaml b/Bindings/gpio/gpio-pca9570.yaml
index 452f897..6f73961 100644
--- a/Bindings/gpio/gpio-pca9570.yaml
+++ b/Bindings/gpio/gpio-pca9570.yaml
@@ -28,6 +28,9 @@
     minItems: 4
     maxItems: 8
 
+  label:
+    description: A descriptive name for this device.
+
 required:
   - compatible
   - reg
diff --git a/Bindings/gpio/mrvl-gpio.yaml b/Bindings/gpio/mrvl-gpio.yaml
index 9cf6137..65155bb 100644
--- a/Bindings/gpio/mrvl-gpio.yaml
+++ b/Bindings/gpio/mrvl-gpio.yaml
@@ -9,7 +9,7 @@
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - if:
diff --git a/Bindings/gpio/renesas,rcar-gpio.yaml b/Bindings/gpio/renesas,rcar-gpio.yaml
index aa424e2..cc7a950 100644
--- a/Bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Bindings/gpio/renesas,rcar-gpio.yaml
@@ -53,6 +53,7 @@
               - renesas,gpio-r8a779a0     # R-Car V3U
               - renesas,gpio-r8a779f0     # R-Car S4-8
               - renesas,gpio-r8a779g0     # R-Car V4H
+              - renesas,gpio-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-gpio # R-Car Gen4
 
   reg:
diff --git a/Bindings/gpio/st,nomadik-gpio.yaml b/Bindings/gpio/st,nomadik-gpio.yaml
new file mode 100644
index 0000000..38d37d8
--- /dev/null
+++ b/Bindings/gpio/st,nomadik-gpio.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nomadik GPIO controller
+
+description:
+  The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also
+  been called ST STA2X11. On the Nomadik platform, this driver is intertwined
+  with pinctrl-nomadik.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - st,nomadik-gpio
+      - mobileye,eyeq5-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-bank:
+    description: System-wide GPIO bank index.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st,supports-sleepmode:
+    description: Whether the controller can sleep or not.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  clocks:
+    maxItems: 1
+
+  gpio-ranges:
+    maxItems: 1
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - interrupt-controller
+  - gpio-bank
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-gpio
+    then:
+      properties:
+        st,supports-sleepmode: false
+
+examples:
+  - |
+    gpio@8012e080 {
+        compatible = "st,nomadik-gpio";
+        reg =  <0x8012e080 0x80>;
+        interrupts = <0 120 0x4>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+        st,supports-sleepmode;
+        gpio-bank = <1>;
+    };
diff --git a/Bindings/gpu/img,powervr.yaml b/Bindings/gpu/img,powervr-rogue.yaml
similarity index 91%
rename from Bindings/gpu/img,powervr.yaml
rename to Bindings/gpu/img,powervr-rogue.yaml
index a13298f..256e252 100644
--- a/Bindings/gpu/img,powervr.yaml
+++ b/Bindings/gpu/img,powervr-rogue.yaml
@@ -2,10 +2,10 @@
 # Copyright (c) 2023 Imagination Technologies Ltd.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/gpu/img,powervr.yaml#
+$id: http://devicetree.org/schemas/gpu/img,powervr-rogue.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Imagination Technologies PowerVR and IMG GPU
+title: Imagination Technologies PowerVR and IMG Rogue GPUs
 
 maintainers:
   - Frank Binns <frank.binns@imgtec.com>
diff --git a/Bindings/gpu/img,powervr-sgx.yaml b/Bindings/gpu/img,powervr-sgx.yaml
new file mode 100644
index 0000000..f5898b0
--- /dev/null
+++ b/Bindings/gpu/img,powervr-sgx.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+# Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr-sgx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR SGX GPUs
+
+maintainers:
+  - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,omap3430-gpu # Rev 121
+              - ti,omap3630-gpu # Rev 125
+          - const: img,powervr-sgx530
+      - items:
+          - enum:
+              - ingenic,jz4780-gpu # Rev 130
+              - ti,omap4430-gpu # Rev 120
+          - const: img,powervr-sgx540
+      - items:
+          - enum:
+              - allwinner,sun6i-a31-gpu # MP2 Rev 115
+              - ti,omap4470-gpu # MP1 Rev 112
+              - ti,omap5432-gpu # MP2 Rev 105
+              - ti,am5728-gpu # MP2 Rev 116
+              - ti,am6548-gpu # MP1 Rev 117
+          - const: img,powervr-sgx544
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: mem
+      - const: sys
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am6548-gpu
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-gpu
+              - ingenic,jz4780-gpu
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-gpu
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ingenic,jz4780-gpu
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    gpu@7000000 {
+        compatible = "ti,am6548-gpu", "img,powervr-sgx544";
+        reg = <0x7000000 0x10000>;
+        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu: gpu@1c40000 {
+        compatible = "allwinner,sun6i-a31-gpu", "img,powervr-sgx544";
+        reg = <0x01c40000 0x10000>;
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu 1>, <&ccu 2>;
+        clock-names = "core", "mem";
+    };
diff --git a/Bindings/hwmon/adi,adm1177.yaml b/Bindings/hwmon/adi,adm1177.yaml
index 2e45364..be7e9e9 100644
--- a/Bindings/hwmon/adi,adm1177.yaml
+++ b/Bindings/hwmon/adi,adm1177.yaml
@@ -46,7 +46,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/adi,adm1275.yaml b/Bindings/hwmon/adi,adm1275.yaml
index ab87f51..b680612 100644
--- a/Bindings/hwmon/adi,adm1275.yaml
+++ b/Bindings/hwmon/adi,adm1275.yaml
@@ -33,10 +33,6 @@
   reg:
     maxItems: 1
 
-  shunt-resistor-micro-ohms:
-    description:
-      Shunt resistor value in micro-Ohm.
-
   adi,volt-curr-sample-average:
     description: |
       Number of samples to be used to report voltage and current values.
@@ -50,6 +46,7 @@
     enum: [1, 2, 4, 8, 16, 32, 64, 128]
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       properties:
         compatible:
@@ -107,7 +104,7 @@
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/adi,ltc2945.yaml b/Bindings/hwmon/adi,ltc2945.yaml
index 5cb66e9..6401b0a 100644
--- a/Bindings/hwmon/adi,ltc2945.yaml
+++ b/Bindings/hwmon/adi,ltc2945.yaml
@@ -31,7 +31,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/adi,ltc4282.yaml b/Bindings/hwmon/adi,ltc4282.yaml
new file mode 100644
index 0000000..4854b95
--- /dev/null
+++ b/Bindings/hwmon/adi,ltc4282.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc4282
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  adi,rsense-nano-ohms:
+    description: Value of the sense resistor.
+
+  adi,vin-mode-microvolt:
+    description:
+      Selects operating range for the Undervoltage, Overvoltage and Foldback
+      pins. Also for the ADC. Should be set to the nominal input voltage.
+    enum: [3300000, 5000000, 12000000, 24000000]
+    default: 12000000
+
+  adi,fet-bad-timeout-ms:
+    description:
+      From the moment a FET bad conditions is present, this property selects the
+      wait time/timeout for a FET-bad fault to be signaled. Setting this to 0,
+      disables FET bad faults to be reported.
+    default: 255
+    maximum: 255
+
+  adi,overvoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,undervoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,current-limit-sense-microvolt:
+    description:
+      The current limit sense voltage of the chip is adjustable between
+      12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current
+      on the load.
+    enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375]
+    default: 25000
+
+  adi,overcurrent-retry:
+    description:
+      If set, enables the chip to auto-retry 256 timer cycles after an
+      Overcurrent fault.
+    type: boolean
+
+  adi,overvoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Overvoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,undervoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Undervoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,fault-log-enable:
+    description:
+      If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written
+      to the EEPROM when a fault bit transitions high and hence, will be
+      available after a power cycle (the chip loads the contents of
+      the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot).
+    type: boolean
+
+  adi,gpio1-mode:
+    description: Defines the function of the Pin. It can indicate that power is
+      good (PULL the pin low when power is not good) or that power is bad (Go
+      into high-z when power is not good).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [power_bad, power_good]
+    default: power_good
+
+  adi,gpio2-mode:
+    description: Defines the function of the Pin. It can be set as the input for
+      the ADC or indicating that the MOSFET is in stress (dissipating power).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [adc_input, stress_fet]
+    default: adc_input
+
+  adi,gpio3-monitor-enable:
+    description: If set, gpio3 is set as input for the ADC instead of gpio2.
+    type: boolean
+
+allOf:
+  - if:
+      required:
+        - adi,gpio3-monitor-enable
+    then:
+      properties:
+        adi,gpio2-mode:
+          const: stress_fet
+
+required:
+  - compatible
+  - reg
+  - adi,rsense-nano-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@50 {
+            compatible = "adi,ltc4282";
+            reg = <0x50>;
+            adi,rsense-nano-ohms = <500>;
+
+            adi,gpio1-mode = "power_good";
+            adi,gpio2-mode = "adc_input";
+        };
+    };
+...
diff --git a/Bindings/hwmon/amphenol,chipcap2.yaml b/Bindings/hwmon/amphenol,chipcap2.yaml
new file mode 100644
index 0000000..17351fd
--- /dev/null
+++ b/Bindings/hwmon/amphenol,chipcap2.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipCap 2 humidity and temperature iio sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  Relative humidity and temperature sensor on I2C bus.
+
+  Datasheets:
+    https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+properties:
+  compatible:
+    oneOf:
+      - const: amphenol,cc2d23
+      - items:
+          - enum:
+              - amphenol,cc2d23s
+              - amphenol,cc2d25
+              - amphenol,cc2d25s
+              - amphenol,cc2d33
+              - amphenol,cc2d33s
+              - amphenol,cc2d35
+              - amphenol,cc2d35s
+          - const: amphenol,cc2d23
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: measurement ready indicator
+      - description: low humidity alarm
+      - description: high humidity alarm
+
+  interrupt-names:
+    items:
+      - const: ready
+      - const: low
+      - const: high
+
+  vdd-supply:
+    description:
+      Dedicated, controllable supply-regulator to reset the device and
+      enter in command mode.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@28 {
+            compatible = "amphenol,cc2d23s", "amphenol,cc2d23";
+            reg = <0x28>;
+            interrupt-parent = <&gpio>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>,
+                         <5 IRQ_TYPE_EDGE_RISING>,
+                         <6 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "ready", "low", "high";
+            vdd-supply = <&reg_vdd>;
+        };
+    };
diff --git a/Bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Bindings/hwmon/aspeed,g6-pwm-tach.yaml
new file mode 100644
index 0000000..9e5ed90
--- /dev/null
+++ b/Bindings/hwmon/aspeed,g6-pwm-tach.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2023 Aspeed, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED G6 PWM and Fan Tach controller
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  The ASPEED PWM controller can support up to 16 PWM outputs.
+  The ASPEED Fan Tacho controller can support up to 16 fan tach input.
+  They are independent hardware blocks, which are different from the
+  previous version of the ASPEED chip.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-pwm-tach
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - tach-ch
+
+required:
+  - reg
+  - clocks
+  - resets
+  - "#pwm-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    pwm_tach: pwm-tach-controller@1e610000 {
+      compatible = "aspeed,ast2600-pwm-tach";
+      reg = <0x1e610000 0x100>;
+      clocks = <&syscon ASPEED_CLK_AHB>;
+      resets = <&syscon ASPEED_RESET_PWM>;
+      #pwm-cells = <3>;
+
+      fan-0 {
+        tach-ch = /bits/ 8 <0x0>;
+        pwms = <&pwm_tach 0 40000 0>;
+      };
+
+      fan-1 {
+        tach-ch = /bits/ 8 <0x1 0x2>;
+        pwms = <&pwm_tach 1 40000 0>;
+      };
+    };
diff --git a/Bindings/hwmon/fan-common.yaml b/Bindings/hwmon/fan-common.yaml
new file mode 100644
index 0000000..0fb7380
--- /dev/null
+++ b/Bindings/hwmon/fan-common.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Fan Properties
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+properties:
+  max-rpm:
+    description:
+      Max RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 100000
+
+  min-rpm:
+    description:
+      Min RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1000
+
+  pulses-per-revolution:
+    description:
+      The number of pulse from fan sensor per revolution.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4
+
+  tach-div:
+    description:
+      Divisor for the tach sampling clock, which determines the sensitivity of the tach pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  target-rpm:
+    description:
+      The default desired fan speed in RPM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fan-driving-mode:
+    description:
+      Select the driving mode of the fan.(DC, PWM and so on)
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ dc, pwm ]
+
+  pwms:
+    description:
+      PWM provider.
+    maxItems: 1
+
+  "#cooling-cells":
+    const: 2
+
+  cooling-levels:
+    description:
+      The control value which correspond to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  tach-ch:
+    description:
+      The tach channel used for the fan.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  label:
+    description:
+      Optional fan label
+
+  fan-supply:
+    description:
+      Power supply for fan.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Bindings/hwmon/hwmon-common.yaml b/Bindings/hwmon/hwmon-common.yaml
new file mode 100644
index 0000000..dc86b5c
--- /dev/null
+++ b/Bindings/hwmon/hwmon-common.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware Monitoring Devices Common Properties
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  label:
+    description: A descriptive name for this device.
+
+  shunt-resistor-micro-ohms:
+    description: The value of current sense resistor.
+
+additionalProperties: true
diff --git a/Bindings/hwmon/lltc,ltc4151.yaml b/Bindings/hwmon/lltc,ltc4151.yaml
index e62aff6..8f0095b 100644
--- a/Bindings/hwmon/lltc,ltc4151.yaml
+++ b/Bindings/hwmon/lltc,ltc4151.yaml
@@ -25,7 +25,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/lltc,ltc4286.yaml b/Bindings/hwmon/lltc,ltc4286.yaml
index 98ca163..853df9f 100644
--- a/Bindings/hwmon/lltc,ltc4286.yaml
+++ b/Bindings/hwmon/lltc,ltc4286.yaml
@@ -25,15 +25,14 @@
       The default is 102.4 volts.
     type: boolean
 
-  shunt-resistor-micro-ohms:
-    description:
-      Resistor value micro-ohms.
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/lm75.yaml b/Bindings/hwmon/lm75.yaml
index ed269e4..29bd746 100644
--- a/Bindings/hwmon/lm75.yaml
+++ b/Bindings/hwmon/lm75.yaml
@@ -57,6 +57,7 @@
   - reg
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       not:
         properties:
@@ -71,7 +72,7 @@
       properties:
         interrupts: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/nuvoton,nct6775.yaml b/Bindings/hwmon/nuvoton,nct6775.yaml
index 358b262..e3db642 100644
--- a/Bindings/hwmon/nuvoton,nct6775.yaml
+++ b/Bindings/hwmon/nuvoton,nct6775.yaml
@@ -25,6 +25,7 @@
       - nuvoton,nct6796
       - nuvoton,nct6797
       - nuvoton,nct6798
+      - nuvoton,nct6799
 
   reg:
     maxItems: 1
diff --git a/Bindings/hwmon/pmbus/infineon,tda38640.yaml b/Bindings/hwmon/pmbus/infineon,tda38640.yaml
index ded1c11..5c4e52b 100644
--- a/Bindings/hwmon/pmbus/infineon,tda38640.yaml
+++ b/Bindings/hwmon/pmbus/infineon,tda38640.yaml
@@ -30,6 +30,23 @@
       unconnected(has internal pull-down).
     type: boolean
 
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -38,6 +55,7 @@
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -45,5 +63,15 @@
         tda38640@40 {
             compatible = "infineon,tda38640";
             reg = <0x40>;
+
+            interrupt-parent = <&smb_pex_cpu0_event>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                pvnn_main_cpu0: vout {
+                    regulator-name = "pvnn_main_cpu0";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
         };
     };
diff --git a/Bindings/hwmon/pmbus/ti,lm25066.yaml b/Bindings/hwmon/pmbus/ti,lm25066.yaml
index da8292b..a20f140 100644
--- a/Bindings/hwmon/pmbus/ti,lm25066.yaml
+++ b/Bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -34,11 +34,26 @@
       Shunt (sense) resistor value in micro-Ohms
     default: 1000
 
+  regulators:
+    type: object
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/hwmon/hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/ti,ina2xx.yaml b/Bindings/hwmon/ti,ina2xx.yaml
index 378d1f6..df86c2c 100644
--- a/Bindings/hwmon/ti,ina2xx.yaml
+++ b/Bindings/hwmon/ti,ina2xx.yaml
@@ -28,10 +28,14 @@
       - ti,ina231
       - ti,ina237
       - ti,ina238
+      - ti,ina260
 
   reg:
     maxItems: 1
 
+  "#io-channel-cells":
+    const: 1
+
   shunt-resistor:
     description:
       Shunt resistor value in micro-Ohm.
@@ -66,7 +70,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -77,6 +84,8 @@
         power-sensor@44 {
             compatible = "ti,ina220";
             reg = <0x44>;
+            #io-channel-cells = <1>;
+            label = "vdd_3v0";
             shunt-resistor = <1000>;
             vs-supply = <&vdd_3v0>;
         };
diff --git a/Bindings/hwmon/ti,tmp513.yaml b/Bindings/hwmon/ti,tmp513.yaml
index cdd1489..227858e 100644
--- a/Bindings/hwmon/ti,tmp513.yaml
+++ b/Bindings/hwmon/ti,tmp513.yaml
@@ -72,7 +72,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/hwmon/ti,tps23861.yaml b/Bindings/hwmon/ti,tps23861.yaml
index ebc8d46..f58248c 100644
--- a/Bindings/hwmon/ti,tps23861.yaml
+++ b/Bindings/hwmon/ti,tps23861.yaml
@@ -35,7 +35,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/i2c/atmel,at91sam-i2c.yaml b/Bindings/i2c/atmel,at91sam-i2c.yaml
index 6adedd3..b1c13ba 100644
--- a/Bindings/i2c/atmel,at91sam-i2c.yaml
+++ b/Bindings/i2c/atmel,at91sam-i2c.yaml
@@ -25,7 +25,9 @@
               - atmel,sama5d2-i2c
               - microchip,sam9x60-i2c
       - items:
-          - const: microchip,sama7g5-i2c
+          - enum:
+              - microchip,sama7g5-i2c
+              - microchip,sam9x7-i2c
           - const: microchip,sam9x60-i2c
 
   reg:
diff --git a/Bindings/i2c/i2c-demux-pinctrl.yaml b/Bindings/i2c/i2c-demux-pinctrl.yaml
index 2c08f2a..b813f6d 100644
--- a/Bindings/i2c/i2c-demux-pinctrl.yaml
+++ b/Bindings/i2c/i2c-demux-pinctrl.yaml
@@ -32,7 +32,6 @@
       +-------------------------------+
 
 allOf:
-  - $ref: i2c-mux.yaml
   - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
@@ -41,6 +40,8 @@
 
   i2c-parent:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       List of phandles of I2C masters available for selection.  The first one
       will be used as default.
diff --git a/Bindings/i2c/i2c-exynos5.yaml b/Bindings/i2c/i2c-exynos5.yaml
index df9c57b..cc8bba5 100644
--- a/Bindings/i2c/i2c-exynos5.yaml
+++ b/Bindings/i2c/i2c-exynos5.yaml
@@ -33,6 +33,7 @@
           - const: samsung,exynos7-hsi2c
       - items:
           - enum:
+              - google,gs101-hsi2c
               - samsung,exynos850-hsi2c
           - const: samsung,exynosautov9-hsi2c
       - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
diff --git a/Bindings/i2c/i2c-imx-lpi2c.yaml b/Bindings/i2c/i2c-imx-lpi2c.yaml
index 4656f51..54d500b 100644
--- a/Bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Bindings/i2c/i2c-imx-lpi2c.yaml
@@ -24,6 +24,7 @@
               - fsl,imx8qm-lpi2c
               - fsl,imx8ulp-lpi2c
               - fsl,imx93-lpi2c
+              - fsl,imx95-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
diff --git a/Bindings/i2c/i2c-mpc.yaml b/Bindings/i2c/i2c-mpc.yaml
index 70fb69b..b1d7d14 100644
--- a/Bindings/i2c/i2c-mpc.yaml
+++ b/Bindings/i2c/i2c-mpc.yaml
@@ -96,6 +96,6 @@
         interrupts = <43 2>;
         interrupt-parent = <&mpic>;
         clock-frequency = <400000>;
-        i2c-scl-clk-low-timeout-us = <10000>;
+        i2c-transfer-timeout-us = <10000>;
     };
 ...
diff --git a/Bindings/i2c/i2c-mux-pca954x.yaml b/Bindings/i2c/i2c-mux-pca954x.yaml
index 2d7bb99..9aa0585 100644
--- a/Bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Bindings/i2c/i2c-mux-pca954x.yaml
@@ -71,6 +71,23 @@
     description: A voltage regulator supplying power to the chip. On PCA9846
       the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
 
+  maxim,isolate-stuck-channel:
+    type: boolean
+    description: Allows to use non faulty channels while a stuck channel is
+      isolated from the upstream bus. If not set all channels are isolated from
+      the upstream bus until the fault is cleared.
+
+  maxim,send-flush-out-sequence:
+    type: boolean
+    description: Send a flush-out sequence to stuck auxiliary buses
+      automatically after a stuck channel is being detected.
+
+  maxim,preconnection-wiggle-test-enable:
+    type: boolean
+    description: Send a STOP condition to the auxiliary buses when the switch
+      register activates a channel to detect a stuck high fault. On fault the
+      channel is isolated from the upstream bus.
+
 required:
   - compatible
   - reg
@@ -95,6 +112,19 @@
         "#interrupt-cells": false
         interrupt-controller: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - maxim,max7357
+    then:
+      properties:
+        maxim,isolate-stuck-channel: false
+        maxim,send-flush-out-sequence: false
+        maxim,preconnection-wiggle-test-enable: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/i2c/i2c-pxa.yaml b/Bindings/i2c/i2c-pxa.yaml
index 31386a8..e89ee36 100644
--- a/Bindings/i2c/i2c-pxa.yaml
+++ b/Bindings/i2c/i2c-pxa.yaml
@@ -7,7 +7,7 @@
 title: Marvell MMP I2C controller
 
 maintainers:
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/Bindings/i2c/i2c.txt b/Bindings/i2c/i2c.txt
deleted file mode 100644
index fc3dd7e..0000000
--- a/Bindings/i2c/i2c.txt
+++ /dev/null
@@ -1,151 +0,0 @@
-Generic device tree bindings for I2C busses
-===========================================
-
-This document describes generic bindings which can be used to describe I2C
-busses and their child devices in a device tree.
-
-Required properties (per bus)
------------------------------
-
-- #address-cells  - should be <1>. Read more about addresses below.
-- #size-cells     - should be <0>.
-- compatible      - name of I2C bus controller
-
-For other required properties e.g. to describe register sets,
-clocks, etc. check the binding documentation of the specific driver.
-
-The cells properties above define that an address of children of an I2C bus
-are described by a single value.
-
-Optional properties (per bus)
------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- clock-frequency
-	frequency of bus clock in Hz.
-
-- i2c-bus
-	For I2C adapters that have child nodes that are a mixture of both I2C
-	devices and non-I2C devices, the 'i2c-bus' subnode can be used for
-	populating I2C devices. If the 'i2c-bus' subnode is present, only
-	subnodes of this will be considered as I2C slaves. The properties,
-	'#address-cells' and '#size-cells' must be defined under this subnode
-	if present.
-
-- i2c-scl-falling-time-ns
-	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-scl-internal-delay-ns
-	Number of nanoseconds the IP core additionally needs to setup SCL.
-
-- i2c-scl-rising-time-ns
-	Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
-	specification.
-
-- i2c-sda-falling-time-ns
-	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-analog-filter
-	Enable analog filter for i2c lines.
-
-- i2c-digital-filter
-	Enable digital filter for i2c lines.
-
-- i2c-digital-filter-width-ns
-	Width of spikes which can be filtered by digital filter
-	(i2c-digital-filter). This width is specified in nanoseconds.
-
-- i2c-analog-filter-cutoff-frequency
-	Frequency that the analog filter (i2c-analog-filter) uses to distinguish
-	which signal to filter. Signal with higher frequency than specified will
-	be filtered out. Only lower frequency will pass (this is applicable to
-	a low-pass analog filter). Typical value should be above the normal
-	i2c bus clock frequency (clock-frequency).
-	Specified in Hz.
-
-- multi-master
-	states that there is another master active on this bus. The OS can use
-	this information to adapt power management to keep the arbitration awake
-	all the time, for example. Can not be combined with 'single-master'.
-
-- pinctrl
-	add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
-	recovery, call it "gpio" or "recovery" (deprecated) state
-
-- scl-gpios
-	specify the gpio related to SCL pin. Used for GPIO bus recovery.
-
-- sda-gpios
-	specify the gpio related to SDA pin. Optional for GPIO bus recovery.
-
-- single-master
-	states that there is no other master active on this bus. The OS can use
-	this information to detect a stalled bus more reliably, for example.
-	Can not be combined with 'multi-master'.
-
-- smbus
-	states that additional SMBus restrictions and features apply to this bus.
-	An example of feature is SMBusHostNotify. Examples of restrictions are
-	more reserved addresses and timeout definitions.
-
-- smbus-alert
-	states that the optional SMBus-Alert feature apply to this bus.
-
-- mctp-controller
-	indicates that the system is accessible via this bus as an endpoint for
-	MCTP over I2C transport.
-
-Required properties (per child device)
---------------------------------------
-
-- compatible
-	name of I2C slave device
-
-- reg
-	One or many I2C slave addresses. These are usually a 7 bit addresses.
-	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
-	used to mark a 10 bit address. It is needed to avoid the ambiguity
-	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
-	which, in theory, can be on the same bus.
-	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
-	listen to be devices ourselves.
-
-Optional properties (per child device)
---------------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- host-notify
-	device uses SMBus host notify protocol instead of interrupt line.
-
-- interrupts
-	interrupts used by the device.
-
-- interrupt-names
-	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
-	other names are	left to individual drivers.
-
-- reg-names
-	Names of map programmable addresses.
-	It can contain any map needing another address than default one.
-
-- wakeup-source
-	device can be used as a wakeup source.
-
-Binding may contain optional "interrupts" property, describing interrupts
-used by the device. I2C core will assign "irq" interrupt (or the very first
-interrupt if not using interrupt names) as primary interrupt for the slave.
-
-Alternatively, devices supporting SMBus Host Notify, and connected to
-adapters that support this feature, may use "host-notify" property. I2C
-core will create a virtual interrupt for Host Notify and assign it as
-primary interrupt for the slave.
-
-Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
-interrupt for the device. If "wakeup" interrupt name is not present in the
-binding, then primary interrupt will be used as wakeup interrupt.
diff --git a/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
index b8319dc..8676335 100644
--- a/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
+++ b/Bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -21,8 +21,7 @@
   See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
   binding.
 
-  This node represents an I2C controller. See ../i2c/i2c.txt for details
-  of the core I2C binding.
+  This node represents an I2C controller.
 
 properties:
   compatible:
diff --git a/Bindings/i2c/qcom,i2c-cci.yaml b/Bindings/i2c/qcom,i2c-cci.yaml
index 8386cfe..f0eabff 100644
--- a/Bindings/i2c/qcom,i2c-cci.yaml
+++ b/Bindings/i2c/qcom,i2c-cci.yaml
@@ -270,7 +270,7 @@
 
                 port {
                     ov7251_ep: endpoint {
-                        data-lanes = <0 1>;
+                        data-lanes = <0>;
                         link-frequencies = /bits/ 64 <240000000 319200000>;
                         remote-endpoint = <&csiphy3_ep>;
                     };
diff --git a/Bindings/i2c/renesas,rcar-i2c.yaml b/Bindings/i2c/renesas,rcar-i2c.yaml
index c4ace55..51b220d 100644
--- a/Bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Bindings/i2c/renesas,rcar-i2c.yaml
@@ -53,6 +53,7 @@
               - renesas,i2c-r8a779a0     # R-Car V3U
               - renesas,i2c-r8a779f0     # R-Car S4-8
               - renesas,i2c-r8a779g0     # R-Car V4H
+              - renesas,i2c-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-i2c # R-Car Gen4
 
   reg:
diff --git a/Bindings/i2c/st,nomadik-i2c.yaml b/Bindings/i2c/st,nomadik-i2c.yaml
index 1602441..44c54b1 100644
--- a/Bindings/i2c/st,nomadik-i2c.yaml
+++ b/Bindings/i2c/st,nomadik-i2c.yaml
@@ -14,9 +14,6 @@
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 # Need a custom select here or 'arm,primecell' will match on lots of nodes
 select:
   properties:
@@ -24,21 +21,23 @@
       contains:
         enum:
           - st,nomadik-i2c
+          - mobileye,eyeq5-i2c
   required:
     - compatible
 
 properties:
   compatible:
     oneOf:
-      # The variant found in STn8815
       - items:
           - const: st,nomadik-i2c
           - const: arm,primecell
-      # The variant found in DB8500
       - items:
           - const: stericsson,db8500-i2c
           - const: st,nomadik-i2c
           - const: arm,primecell
+      - items:
+          - const: mobileye,eyeq5-i2c
+          - const: arm,primecell
 
   reg:
     maxItems: 1
@@ -55,7 +54,7 @@
       - items:
           - const: mclk
           - const: apb_pclk
-      # Clock name in DB8500
+      # Clock name in DB8500 or EyeQ5
       - items:
           - const: i2cclk
           - const: apb_pclk
@@ -70,6 +69,16 @@
     minimum: 1
     maximum: 400000
 
+  mobileye,olb:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to OLB system controller node.
+          - description: Platform-wide controller ID (integer starting from zero).
+    description:
+      The phandle pointing to OLB system controller node, with the I2C
+      controller index.
+
 required:
   - compatible
   - reg
@@ -79,6 +88,20 @@
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-i2c
+    then:
+      required:
+        - mobileye,olb
+    else:
+      properties:
+        mobileye,olb: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -111,5 +134,19 @@
       clocks = <&i2c0clk>, <&pclki2c0>;
       clock-names = "mclk", "apb_pclk";
     };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    i2c@300000 {
+      compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+      reg = <0x300000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c_ser_clk>, <&i2c_clk>;
+      clock-names = "i2cclk", "apb_pclk";
+      mobileye,olb = <&olb 0>;
+    };
 
 ...
diff --git a/Bindings/i3c/aspeed,ast2600-i3c.yaml b/Bindings/i3c/aspeed,ast2600-i3c.yaml
index fcc3dbf..47be5d9 100644
--- a/Bindings/i3c/aspeed,ast2600-i3c.yaml
+++ b/Bindings/i3c/aspeed,ast2600-i3c.yaml
@@ -57,7 +57,7 @@
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    i3c-master@2000 {
+    i3c@2000 {
         compatible = "aspeed,ast2600-i3c";
         reg = <0x2000 0x1000>;
         #address-cells = <3>;
diff --git a/Bindings/i3c/cdns,i3c-master.yaml b/Bindings/i3c/cdns,i3c-master.yaml
index cc40d25..cad6d53 100644
--- a/Bindings/i3c/cdns,i3c-master.yaml
+++ b/Bindings/i3c/cdns,i3c-master.yaml
@@ -41,7 +41,7 @@
 
 examples:
   - |
-    i3c-master@d040000 {
+    i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
         clock-names = "pclk", "sysclk";
diff --git a/Bindings/i3c/i3c.yaml b/Bindings/i3c/i3c.yaml
index c816e29..113957e 100644
--- a/Bindings/i3c/i3c.yaml
+++ b/Bindings/i3c/i3c.yaml
@@ -17,7 +17,7 @@
 
 properties:
   $nodename:
-    pattern: "^i3c-master@[0-9a-f]+$"
+    pattern: "^i3c@[0-9a-f]+$"
 
   "#address-cells":
     const: 3
@@ -71,7 +71,7 @@
     description: |
       I2C child, should be named: <device-type>@<i2c-address>
 
-      All properties described in Documentation/devicetree/bindings/i2c/i2c.txt
+      All properties described in dtschema schemas/i2c/i2c-controller.yaml
       are valid here, except the reg property whose content is changed.
 
     properties:
@@ -153,7 +153,7 @@
 
 examples:
   - |
-    i3c-master@d040000 {
+    i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
         clock-names = "pclk", "sysclk";
diff --git a/Bindings/i3c/mipi-i3c-hci.yaml b/Bindings/i3c/mipi-i3c-hci.yaml
index 5dda8cb..39bb1a1 100644
--- a/Bindings/i3c/mipi-i3c-hci.yaml
+++ b/Bindings/i3c/mipi-i3c-hci.yaml
@@ -43,7 +43,7 @@
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
       compatible = "mipi-i3c-hci";
       reg = <0xa0000000 0x2000>;
       interrupts = <89>;
diff --git a/Bindings/i3c/silvaco,i3c-master.yaml b/Bindings/i3c/silvaco,i3c-master.yaml
index 133855f..c56ff77 100644
--- a/Bindings/i3c/silvaco,i3c-master.yaml
+++ b/Bindings/i3c/silvaco,i3c-master.yaml
@@ -48,7 +48,7 @@
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
         compatible = "silvaco,i3c-master-v1";
         clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
         clock-names = "pclk", "fast_clk", "slow_clk";
diff --git a/Bindings/i3c/snps,dw-i3c-master.yaml b/Bindings/i3c/snps,dw-i3c-master.yaml
index 7a76fd3..c0e805e 100644
--- a/Bindings/i3c/snps,dw-i3c-master.yaml
+++ b/Bindings/i3c/snps,dw-i3c-master.yaml
@@ -35,7 +35,7 @@
 
 examples:
   - |
-    i3c-master@2000 {
+    i3c@2000 {
         compatible = "snps,dw-i3c-master-1.00a";
         #address-cells = <3>;
         #size-cells = <0>;
diff --git a/Bindings/iio/adc/adc.yaml b/Bindings/iio/adc/adc.yaml
index 2616017..36775f8 100644
--- a/Bindings/iio/adc/adc.yaml
+++ b/Bindings/iio/adc/adc.yaml
@@ -22,7 +22,6 @@
     maxItems: 1
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Unique name to identify which channel this is.
 
   bipolar:
diff --git a/Bindings/iio/adc/adi,ad9467.yaml b/Bindings/iio/adc/adi,ad9467.yaml
index 7aa748d..eecd5fb 100644
--- a/Bindings/iio/adc/adi,ad9467.yaml
+++ b/Bindings/iio/adc/adi,ad9467.yaml
@@ -44,6 +44,9 @@
       Pin that controls the powerdown mode of the device.
     maxItems: 1
 
+  io-backends:
+    maxItems: 1
+
   reset-gpios:
     description:
       Reset pin for the device.
@@ -68,6 +71,7 @@
             reg = <0>;
             clocks = <&adc_clk>;
             clock-names = "adc-clk";
+            io-backends = <&iio_backend>;
         };
     };
 ...
diff --git a/Bindings/iio/adc/adi,axi-adc.yaml b/Bindings/iio/adc/adi,axi-adc.yaml
index 9996dd9..3d49d21 100644
--- a/Bindings/iio/adc/adi,axi-adc.yaml
+++ b/Bindings/iio/adc/adi,axi-adc.yaml
@@ -39,12 +39,15 @@
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
 
 additionalProperties: false
 
@@ -55,7 +58,6 @@
         reg = <0x44a00000 0x10000>;
         dmas = <&rx_dma 0>;
         dma-names = "rx";
-
-        adi,adc-dev = <&spi_adc>;
+        #io-backend-cells = <0>;
     };
 ...
diff --git a/Bindings/iio/adc/microchip,pac1934.yaml b/Bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 0000000..47a11a9
--- /dev/null
+++ b/Bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with
+  Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  slow-io-gpios:
+    description:
+      A GPIO used to trigger a change is sampling rate (lowering the chip power
+      consumption). If configured in SLOW mode, if this pin is forced high,
+      sampling rate is forced to eight samples/second. When it is forced low,
+      the sampling rate is 1024 samples/second unless a different sample rate
+      has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description:
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured.
+          Value is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
diff --git a/Bindings/iio/adc/nxp,imx93-adc.yaml b/Bindings/iio/adc/nxp,imx93-adc.yaml
index dacc526..dfc3f51 100644
--- a/Bindings/iio/adc/nxp,imx93-adc.yaml
+++ b/Bindings/iio/adc/nxp,imx93-adc.yaml
@@ -31,7 +31,6 @@
       - description: normal conversion, include EOC (End of Conversion),
           ECH (End of Chain), JEOC (End of Injected Conversion) and
           JECH (End of injected Chain).
-      - description: Self-testing Interrupts.
 
   clocks:
     maxItems: 1
@@ -70,8 +69,7 @@
             reg = <0x44530000 0x10000>;
             interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
             clocks = <&clk IMX93_CLK_ADC1_GATE>;
             clock-names = "ipg";
             vref-supply = <&reg_vref_1v8>;
diff --git a/Bindings/iio/adc/qcom,spmi-vadc.yaml b/Bindings/iio/adc/qcom,spmi-vadc.yaml
index 40fa071..c28db0d 100644
--- a/Bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -75,7 +75,6 @@
           in the PMIC-specific files in include/dt-bindings/iio/.
 
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: |
             ADC input of the platform as seen in the schematics.
             For thermistor inputs connected to generic AMUX or GPIO inputs
diff --git a/Bindings/iio/adc/richtek,rtq6056.yaml b/Bindings/iio/adc/richtek,rtq6056.yaml
index 88e0086..af2c3a6 100644
--- a/Bindings/iio/adc/richtek,rtq6056.yaml
+++ b/Bindings/iio/adc/richtek,rtq6056.yaml
@@ -25,7 +25,14 @@
 
 properties:
   compatible:
-    const: richtek,rtq6056
+    oneOf:
+      - enum:
+          - richtek,rtq6056
+          - richtek,rtq6059
+      - items:
+          - enum:
+              - richtek,rtq6053
+          - const: richtek,rtq6056
 
   reg:
     maxItems: 1
diff --git a/Bindings/iio/adc/ti,ads1298.yaml b/Bindings/iio/adc/ti,ads1298.yaml
new file mode 100644
index 0000000..bf5a43a
--- /dev/null
+++ b/Bindings/iio/adc/ti,ads1298.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads1298 medical ADC chips
+
+description: |
+  Datasheet at: https://www.ti.com/product/ADS1298
+  Bindings for this chip aren't complete.
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1298
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Analog power supply, voltage between AVDD and AVSS. When providing a
+      symmetric +/- 2.5V, the regulator should report 5V.
+
+  vref-supply:
+    description:
+      Optional reference voltage. If omitted, internal reference is used,
+      which is 2.4V when analog supply is below 4.4V, 4V otherwise.
+
+  clocks:
+    description: Optional 2.048 MHz external source clock on CLK pin
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt on DRDY pin, triggers on falling edge
+    maxItems: 1
+
+  label: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1 {
+          reg = <1>;
+          compatible = "ti,ads1298";
+          label = "ads1298-1-ecg";
+          avdd-supply = <&reg_iso_5v_a>;
+          clocks = <&clk_ads1298>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
+          spi-max-frequency = <20000000>;
+          spi-cpha;
+        };
+    };
+...
diff --git a/Bindings/iio/afe/voltage-divider.yaml b/Bindings/iio/afe/voltage-divider.yaml
index dddf97b..4151f99 100644
--- a/Bindings/iio/afe/voltage-divider.yaml
+++ b/Bindings/iio/afe/voltage-divider.yaml
@@ -39,6 +39,17 @@
     description: |
       Channel node of a voltage io-channel.
 
+  '#io-channel-cells':
+    description:
+      In addition to consuming the measurement services of a voltage
+      output channel, the voltage divider can act as a provider of
+      measurement services to other devices. This is particularly
+      useful in scenarios wherein an ADC has an analog frontend,
+      such as a voltage divider, and then consuming its raw value
+      isn't interesting. In this case, the voltage before the divider
+      is desired.
+    const: 1
+
   output-ohms:
     description:
       Resistance Rout over which the output voltage is measured. See full-ohms.
diff --git a/Bindings/iio/amplifiers/adi,hmc425a.yaml b/Bindings/iio/amplifiers/adi,hmc425a.yaml
index 67de9d4..3a47045 100644
--- a/Bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -21,6 +21,8 @@
   HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
     https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
 
+  LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf
 
 properties:
   compatible:
@@ -28,16 +30,55 @@
       - adi,adrf5740
       - adi,hmc425a
       - adi,hmc540s
+      - adi,ltc6373
 
   vcc-supply: true
 
   ctrl-gpios:
     description:
-      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
-      connected to the control pins V1-V6.
-    minItems: 6
+      Must contain an array of GPIO specifiers, referring to the GPIO pins
+      connected to the control pins.
+        ADRF5740  - 4 GPIO connected to D2-D5
+        HMC540S   - 4 GPIO connected to V1-V4
+        HMC425A   - 6 GPIO connected to V1-V6
+        LTC6373   - 3 GPIO connected to A0-A2
+    minItems: 1
     maxItems: 6
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,hmc425a
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 6
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            anyOf:
+              - const: adi,adrf5740
+              - const: adi,hmc540s
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 4
+          maxItems: 4
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ltc6373
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 3
+          maxItems: 3
+
 required:
   - compatible
   - ctrl-gpios
diff --git a/Bindings/iio/frequency/adi,admfm2000.yaml b/Bindings/iio/frequency/adi,admfm2000.yaml
new file mode 100644
index 0000000..2bcf4bb
--- /dev/null
+++ b/Bindings/iio/frequency/adi,admfm2000.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMFM2000 Dual Microwave Down Converter
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description:
+  Dual microwave down converter module with input RF and LO frequency ranges
+  from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz.
+  It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down
+  conversion path.
+
+properties:
+  compatible:
+    enum:
+      - adi,admfm2000
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of the device.
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number.
+        minimum: 0
+        maximum: 1
+
+      adi,mixer-mode:
+        description:
+          Enable mixer mode for the channel. It downconverts RF between 5 GHz
+          and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel
+          is in direct IF mode which bypasses the mixer and downconverts RF
+          between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz.
+        type: boolean
+
+      switch-gpios:
+        description: |
+          GPIOs to select the RF path for the channel. The same state of CTRL-A
+          and CTRL-B GPIOs is not permitted.
+          CTRL-A   CTRL-B    CH1 Status        CH2 Status
+          1        0         Direct IF mode    Mixer mode
+          0        1         Mixer mode        Direct IF mode
+
+        items:
+          - description: CTRL-A GPIO
+          - description: CTRL-B GPIO
+
+      attenuation-gpios:
+        description: |
+          Choice of attenuation:
+          DSA-V4  DSA-V3  DSA-V2  DSA-V1  DSA-V0
+          1       1       1       1       1        0 dB
+          1       1       1       1       0        -1 dB
+          1       1       1       0       1        -2 dB
+          1       1       0       1       1        -4 dB
+          1       0       1       1       1        -8 dB
+          0       1       1       1       1        -16 dB
+          0       0       0       0       0        -31 dB
+
+        items:
+          - description: DSA-V0 GPIO
+          - description: DSA-V1 GPIO
+          - description: DSA-V2 GPIO
+          - description: DSA-V3 GPIO
+          - description: DSA-V4 GPIO
+
+    required:
+      - reg
+      - switch-gpios
+      - attenuation-gpios
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    converter {
+      compatible = "adi,admfm2000";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+        switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>,
+                       <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>,
+                            <&gpio 22 GPIO_ACTIVE_LOW>,
+                            <&gpio 23 GPIO_ACTIVE_LOW>,
+                            <&gpio 24 GPIO_ACTIVE_LOW>,
+                            <&gpio 25 GPIO_ACTIVE_LOW>;
+      };
+
+      channel@1 {
+        reg = <1>;
+        adi,mixer-mode;
+        switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>,
+                       <&gpio 4 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                            <&gpio 5 GPIO_ACTIVE_LOW>,
+                            <&gpio 6 GPIO_ACTIVE_LOW>,
+                            <&gpio 16 GPIO_ACTIVE_LOW>,
+                            <&gpio 26 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git a/Bindings/iio/gyroscope/bosch,bmg160.yaml b/Bindings/iio/gyroscope/bosch,bmg160.yaml
index 1414ba9..3c6fe74 100644
--- a/Bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -22,6 +22,9 @@
   vdd-supply: true
   vddio-supply: true
 
+  spi-max-frequency:
+    maximum: 10000000
+
   interrupts:
     minItems: 1
     maxItems: 2
@@ -33,7 +36,10 @@
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Bindings/iio/health/maxim,max30102.yaml b/Bindings/iio/health/maxim,max30102.yaml
index c13c10c..eed0df9 100644
--- a/Bindings/iio/health/maxim,max30102.yaml
+++ b/Bindings/iio/health/maxim,max30102.yaml
@@ -42,7 +42,7 @@
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git a/Bindings/iio/humidity/ti,hdc2010.yaml b/Bindings/iio/humidity/ti,hdc2010.yaml
index 79e75a8..e3eca89 100644
--- a/Bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Bindings/iio/humidity/ti,hdc2010.yaml
@@ -27,6 +27,9 @@
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/iio/humidity/ti,hdc3020.yaml b/Bindings/iio/humidity/ti,hdc3020.yaml
index 7f6d0f9..8b5dedd 100644
--- a/Bindings/iio/humidity/ti,hdc3020.yaml
+++ b/Bindings/iio/humidity/ti,hdc3020.yaml
@@ -43,6 +43,7 @@
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -51,5 +52,7 @@
             compatible = "ti,hdc3021", "ti,hdc3020";
             reg = <0x47>;
             vdd-supply = <&vcc_3v3>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
         };
     };
diff --git a/Bindings/iio/imu/st,lsm6dsx.yaml b/Bindings/iio/imu/st,lsm6dsx.yaml
index 28b667a..c48a96d 100644
--- a/Bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Bindings/iio/imu/st,lsm6dsx.yaml
@@ -35,7 +35,9 @@
           - st,lsm6dsv
           - st,lsm6dso16is
       - items:
-          - const: st,asm330lhhx
+          - enum:
+              - st,asm330lhhx
+              - st,asm330lhhxg1
           - const: st,lsm6dsr
       - items:
           - const: st,lsm6dstx
diff --git a/Bindings/iio/light/ams,as73211.yaml b/Bindings/iio/light/ams,as73211.yaml
index 0e8cd02..062a038 100644
--- a/Bindings/iio/light/ams,as73211.yaml
+++ b/Bindings/iio/light/ams,as73211.yaml
@@ -4,19 +4,22 @@
 $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor
 
 maintainers:
   - Christian Eggers <ceggers@arri.de>
 
 description: |
-  XYZ True Color Sensor with I2C Interface
+  AMS AS73211 XYZ True Color Sensor with I2C Interface
   https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+  AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface
+  https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf
 
 properties:
   compatible:
     enum:
       - ams,as73211
+      - ams,as7331
 
   reg:
     description:
diff --git a/Bindings/iio/light/vishay,veml6075.yaml b/Bindings/iio/light/vishay,veml6075.yaml
index abee04c..91c3187 100644
--- a/Bindings/iio/light/vishay,veml6075.yaml
+++ b/Bindings/iio/light/vishay,veml6075.yaml
@@ -21,6 +21,7 @@
 required:
   - compatible
   - reg
+  - vdd-supply
 
 additionalProperties: false
 
diff --git a/Bindings/iio/magnetometer/voltafield,af8133j.yaml b/Bindings/iio/magnetometer/voltafield,af8133j.yaml
new file mode 100644
index 0000000..b6ab01a
--- /dev/null
+++ b/Bindings/iio/magnetometer/voltafield,af8133j.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltafield AF8133J magnetometer sensor
+
+maintainers:
+  - Ondřej Jirman <megi@xff.cz>
+
+properties:
+  compatible:
+    const: voltafield,af8133j
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      A signal for active low reset input of the sensor. (optional; if not
+      used, software reset over I2C will be used instead)
+
+  avdd-supply:
+    description:
+      A regulator that provides AVDD power (Working power, usually 3.3V) to
+      the sensor.
+
+  dvdd-supply:
+    description:
+      A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD)
+      to the sensor.
+
+  mount-matrix:
+    description: An optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@1c {
+            compatible = "voltafield,af8133j";
+            reg = <0x1c>;
+            avdd-supply = <&reg_dldo1>;
+            dvdd-supply = <&reg_dldo1>;
+            reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Bindings/iio/pressure/honeywell,hsc030pa.yaml b/Bindings/iio/pressure/honeywell,hsc030pa.yaml
index 65a24ed..89977b9 100644
--- a/Bindings/iio/pressure/honeywell,hsc030pa.yaml
+++ b/Bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -99,6 +99,9 @@
   - honeywell,transfer-function
   - honeywell,pressure-triplet
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
 additionalProperties: false
 
 dependentSchemas:
diff --git a/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
index d9e903f..6994b30 100644
--- a/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ b/Bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -8,25 +8,28 @@
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
+  - Petre Rodan <petre.rodan@subdimension.ro>
 
 description: |
   Honeywell pressure sensor of model mprls0025pa.
 
-  This sensor has an I2C and SPI interface. Only the I2C interface is
-  implemented.
+  This sensor has an I2C and SPI interface.
 
   There are many models with different pressure ranges available. The vendor
   calls them "mpr series". All of them have the identical programming model and
   differ in the pressure range, unit and transfer function.
 
-  To support different models one need to specify the pressure range as well as
-  the transfer function. Pressure range needs to be converted from its unit to
-  pascal.
+  To support different models one need to specify its pressure triplet as well
+  as the transfer function.
+
+  For custom silicon chips not covered by the Honeywell MPR series datasheet,
+  the pressure values can be specified manually via honeywell,pmin-pascal and
+  honeywell,pmax-pascal.
+  The minimal range value stands for the minimum pressure and the maximum value
+  also for the maximum pressure with linear relation inside the range.
 
   The transfer function defines the ranges of numerical values delivered by the
-  sensor. The minimal range value stands for the minimum pressure and the
-  maximum value also for the maximum pressure with linear relation inside the
-  range.
+  sensor.
 
   Specifications about the devices can be found at:
     https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
@@ -42,6 +45,10 @@
     maxItems: 1
 
   interrupts:
+    description:
+      Optional interrupt for indicating End-of-conversion.
+      If not present, the driver loops for a while until the received status
+      byte indicates correct measurement.
     maxItems: 1
 
   reset-gpios:
@@ -50,6 +57,27 @@
       If not present the device is not reset during the probe.
     maxItems: 1
 
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by the
+      sensor.
+      1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
+      2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
+      3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    enum: [1, 2, 3]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, unset and provide pmin-pascal and pmax-pascal instead.
+    enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
+           0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
+           0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
+           0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG]
+    $ref: /schemas/types.yaml#/definitions/string
+
   honeywell,pmin-pascal:
     description:
       Minimum pressure value the sensor can measure in pascal.
@@ -58,14 +86,8 @@
     description:
       Maximum pressure value the sensor can measure in pascal.
 
-  honeywell,transfer-function:
-    description: |
-      Transfer function which defines the range of valid values delivered by the
-      sensor.
-      1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
-      2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
-      3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
-    $ref: /schemas/types.yaml#/definitions/uint32
+  spi-max-frequency:
+    maximum: 800000
 
   vdd-supply:
     description: provide VDD power to the sensor.
@@ -73,11 +95,26 @@
 required:
   - compatible
   - reg
-  - honeywell,pmin-pascal
-  - honeywell,pmax-pascal
   - honeywell,transfer-function
   - vdd-supply
 
+oneOf:
+  - required:
+      - honeywell,pressure-triplet
+  - required:
+      - honeywell,pmin-pascal
+      - honeywell,pmax-pascal
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - if:
+      required:
+        - honeywell,pressure-triplet
+    then:
+      properties:
+        honeywell,pmin-pascal: false
+        honeywell,pmax-pascal: false
+
 additionalProperties: false
 
 examples:
@@ -93,10 +130,29 @@
             reg = <0x18>;
             reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
             interrupt-parent = <&gpio3>;
-            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
-            honeywell,pmin-pascal = <0>;
-            honeywell,pmax-pascal = <172369>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0025PA";
             honeywell,transfer-function = <1>;
             vdd-supply = <&vcc_3v3>;
         };
     };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0015PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+...
diff --git a/Bindings/iio/temperature/ti,tmp117.yaml b/Bindings/iio/temperature/ti,tmp117.yaml
index 8c6d773..58aa154 100644
--- a/Bindings/iio/temperature/ti,tmp117.yaml
+++ b/Bindings/iio/temperature/ti,tmp117.yaml
@@ -24,9 +24,16 @@
   reg:
     maxItems: 1
 
+  vcc-supply:
+    description: provide VCC power to the sensor.
+
+  label:
+    description: Unique name to identify which device this is.
+
 required:
   - compatible
   - reg
+  - vcc-supply
 
 additionalProperties: false
 
@@ -39,5 +46,6 @@
         tmp117@48 {
              compatible = "ti,tmp117";
              reg = <0x48>;
+             vcc-supply = <&pmic_reg_3v3>;
         };
     };
diff --git a/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index 5efceb3..c384bf0 100644
--- a/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -49,7 +49,6 @@
     $ref: input.yaml#
     properties:
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: Descriptive name of the key
 
       linux,code: true
diff --git a/Bindings/input/atmel,captouch.txt b/Bindings/input/atmel,captouch.txt
deleted file mode 100644
index fe9ee5c..0000000
--- a/Bindings/input/atmel,captouch.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device tree bindings for Atmel capacitive touch device, typically
-an Atmel touch sensor connected to AtmegaXX MCU running firmware
-based on Qtouch library.
-
-The node for this device must be a child of a I2C controller node, as the
-device communicates via I2C.
-
-Required properties:
-
-	compatible:	Must be "atmel,captouch".
-	reg:		The I2C slave address of the device.
-	interrupts:	Property describing the interrupt line the device
-			is connected to. The device only has one interrupt
-			source.
-	linux,keycodes:	Specifies an array of numeric keycode values to
-			be used for reporting button presses. The array can
-			contain up to 8 entries.
-
-Optional properties:
-
-	autorepeat:	Enables the Linux input system's autorepeat
-			feature on the input device.
-
-Example:
-
-	atmel-captouch@51 {
-		compatible = "atmel,captouch";
-		reg = <0x51>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-		linux,keycodes = <BTN_0>, <BTN_1>,
-			<BTN_2>, <BTN_3>,
-			<BTN_4>, <BTN_5>,
-			<BTN_6>, <BTN_7>;
-		autorepeat;
-	};
diff --git a/Bindings/input/atmel,captouch.yaml b/Bindings/input/atmel,captouch.yaml
new file mode 100644
index 0000000..f747709
--- /dev/null
+++ b/Bindings/input/atmel,captouch.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,captouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel capacitive touch device
+
+maintainers:
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  Atmel capacitive touch device, typically an Atmel touch sensor connected to
+  AtmegaXX MCU running firmware based on Qtouch library.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: atmel,captouch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - linux,keycodes
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touch@51 {
+        compatible = "atmel,captouch";
+        reg = <0x51>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+        linux,keycodes = <BTN_0>, <BTN_1>,
+                         <BTN_2>, <BTN_3>,
+                         <BTN_4>, <BTN_5>,
+                         <BTN_6>, <BTN_7>;
+        autorepeat;
+      };
+    };
diff --git a/Bindings/input/da9062-onkey.txt b/Bindings/input/da9062-onkey.txt
deleted file mode 100644
index e5eef59..0000000
--- a/Bindings/input/da9062-onkey.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Dialog DA9061/62/63 OnKey Module
-
-This module is part of the DA9061/DA9062/DA9063. For more details about entire
-DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
-
-This module provides the KEY_POWER event.
-
-Required properties:
-
-- compatible: should be one of the following valid compatible string lines:
-	"dlg,da9061-onkey", "dlg,da9062-onkey"
-	"dlg,da9062-onkey"
-	"dlg,da9063-onkey"
-
-Optional properties:
-
-- dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press when triggered using a long press of the OnKey.
-
-Example: DA9063
-
-	pmic0: da9063@58 {
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9062
-
-	pmic0: da9062@58 {
-		onkey {
-			compatible = "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
-
-	pmic0: da9061@58 {
-		onkey {
-			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
diff --git a/Bindings/input/dlg,da9062-onkey.yaml b/Bindings/input/dlg,da9062-onkey.yaml
new file mode 100644
index 0000000..1480d95
--- /dev/null
+++ b/Bindings/input/dlg,da9062-onkey.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9061/62/63 OnKey Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062/DA9063. For more details about entire
+  DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  This module provides the KEY_POWER event.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dlg,da9062-onkey
+          - dlg,da9063-onkey
+      - items:
+          - const: dlg,da9061-onkey
+          - const: dlg,da9062-onkey
+
+  dlg,disable-key-power:
+    type: boolean
+    description:
+      Disable power-down using a long key-press. If this entry exists
+      the OnKey driver will remove support for the KEY_POWER key press
+      when triggered using a long press of the OnKey.
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/input/samsung,s3c6410-keypad.yaml b/Bindings/input/samsung,s3c6410-keypad.yaml
new file mode 100644
index 0000000..a53569a
--- /dev/null
+++ b/Bindings/input/samsung,s3c6410-keypad.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series Keypad Controller
+
+description:
+  Samsung SoC Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-keypad
+      - samsung,s5pv210-keypad
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: keypad
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  linux,input-no-autorepeat:
+    type: boolean
+    description:
+      Do no enable autorepeat feature.
+
+  linux,input-wakeup:
+    type: boolean
+    deprecated: true
+
+  samsung,keypad-num-columns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of column lines connected to the keypad controller.
+
+  samsung,keypad-num-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of row lines connected to the keypad controller.
+
+patternProperties:
+  '^key-[0-9a-z]+$':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each key connected to the keypad controller is represented as a child
+      node to the keypad controller device node.
+
+    properties:
+      keypad,column:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The column number to which the key is connected.
+
+      keypad,row:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The row number to which the key is connected.
+
+      linux,code: true
+
+    required:
+      - keypad,column
+      - keypad,row
+      - linux,code
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - samsung,keypad-num-columns
+  - samsung,keypad-num-rows
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    keypad@100a0000 {
+        compatible = "samsung,s5pv210-keypad";
+        reg = <0x100a0000 0x100>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_KEYIF>;
+        clock-names = "keypad";
+
+        samsung,keypad-num-rows = <2>;
+        samsung,keypad-num-columns = <8>;
+        linux,input-no-autorepeat;
+        wakeup-source;
+
+        key-1 {
+            keypad,row = <0>;
+            keypad,column = <3>;
+            linux,code = <2>;
+        };
+
+        key-2 {
+            keypad,row = <0>;
+            keypad,column = <4>;
+            linux,code = <3>;
+        };
+    };
diff --git a/Bindings/input/samsung-keypad.txt b/Bindings/input/samsung-keypad.txt
deleted file mode 100644
index 4c5c0a8..0000000
--- a/Bindings/input/samsung-keypad.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung's Keypad Controller device tree bindings
-
-Samsung's Keypad controller is used to interface a SoC with a matrix-type
-keypad device. The keypad controller supports multiple row and column lines.
-A key can be placed at each intersection of a unique row and a unique column.
-The keypad controller can sense a key-press and key-release and report the
-event using a interrupt to the cpu.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
-    controller.
-  - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
-    controller.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- interrupts: The interrupt number to the cpu.
-
-Required Board Specific Properties:
-- samsung,keypad-num-rows: Number of row lines connected to the keypad
-  controller.
-
-- samsung,keypad-num-columns: Number of column lines connected to the
-  keypad controller.
-
-- Keys represented as child nodes: Each key connected to the keypad
-  controller is represented as a child node to the keypad controller
-  device node and should include the following properties.
-  - keypad,row: the row number to which the key is connected.
-  - keypad,column: the column number to which the key is connected.
-  - linux,code: the key-code to be reported when the key is pressed
-    and released.
-
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Optional Properties:
-- wakeup-source: use any event on keypad as wakeup event.
-		 (Legacy property supported: "linux,input-wakeup")
-
-Optional Properties specific to linux:
-- linux,keypad-no-autorepeat: do no enable autorepeat feature.
-
-
-Example:
-	keypad@100a0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <173>;
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,input-no-autorepeat;
-		wakeup-source;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&keypad_rows &keypad_columns>;
-
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-	};
diff --git a/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
new file mode 100644
index 0000000..678756a
--- /dev/null
+++ b/Bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6UL Touch Controller
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-tsc
+
+  reg:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  interrupts:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: tsc
+      - const: adc
+
+  xnur-gpios:
+    maxItems: 1
+    description:
+      The X- gpio this controller connect to. This xnur-gpio returns to
+      low once the finger leave the touch screen (The last touch event
+      the touch controller capture).
+
+  measure-delay-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The value of measure delay time. Before X-axis or Y-axis measurement,
+      the screen need some time before even potential distribution ready.
+    default: 0xffff
+    minimum: 0
+    maximum: 0xffffff
+
+  pre-charge-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The touch screen need some time to precharge.
+    default: 0xfff
+    minimum: 0
+    maximum: 0xffffffff
+
+  touchscreen-average-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of data samples which are averaged for each read.
+    enum: [ 1, 4, 8, 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - xnur-gpios
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    touchscreen@2040000 {
+        compatible = "fsl,imx6ul-tsc";
+        reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6UL_CLK_IPG>,
+                 <&clks IMX6UL_CLK_ADC2>;
+        clock-names = "tsc", "adc";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_tsc>;
+        xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+        measure-delay-time = <0xfff>;
+        pre-charge-time = <0xffff>;
+        touchscreen-average-samples = <32>;
+    };
diff --git a/Bindings/input/touchscreen/goodix,gt9916.yaml b/Bindings/input/touchscreen/goodix,gt9916.yaml
new file mode 100644
index 0000000..d90f045
--- /dev/null
+++ b/Bindings/input/touchscreen/goodix,gt9916.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix Berlin series touchscreen controller
+
+description: The Goodix Berlin series of touchscreen controllers
+  be connected to either I2C or SPI buses.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt9916
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply regulator on AVDD pin
+
+  vddio-supply:
+    description: power supply regulator on VDDIO pin
+
+  spi-max-frequency: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@5d {
+        compatible = "goodix,gt9916";
+        reg = <0x5d>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+      cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+      touchscreen@0 {
+        compatible = "goodix,gt9916";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        spi-max-frequency = <1000000>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+
+...
diff --git a/Bindings/input/touchscreen/goodix.yaml b/Bindings/input/touchscreen/goodix.yaml
index 3d016b8..2a2d86c 100644
--- a/Bindings/input/touchscreen/goodix.yaml
+++ b/Bindings/input/touchscreen/goodix.yaml
@@ -37,8 +37,9 @@
     maxItems: 1
 
   irq-gpios:
-    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
-      as output to reset the device.
+    description: GPIO pin used for IRQ input. Additionally, this line is
+      sampled by the device on reset deassertion to select the I2C client
+      address, thus it can be driven by the host during the reset sequence.
     maxItems: 1
 
   reset-gpios:
diff --git a/Bindings/input/touchscreen/imagis,ist3038c.yaml b/Bindings/input/touchscreen/imagis,ist3038c.yaml
index 0d6b033..77ba280 100644
--- a/Bindings/input/touchscreen/imagis,ist3038c.yaml
+++ b/Bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -9,15 +9,14 @@
 maintainers:
   - Markuss Broks <markuss.broks@gmail.com>
 
-allOf:
-  - $ref: touchscreen.yaml#
-
 properties:
   $nodename:
     pattern: "^touchscreen@[0-9a-f]+$"
 
   compatible:
     enum:
+      - imagis,ist3032c
+      - imagis,ist3038b
       - imagis,ist3038c
 
   reg:
@@ -32,6 +31,10 @@
   vddio-supply:
     description: Power supply regulator for the I2C bus
 
+  linux,keycodes:
+    description: Keycodes for the touch keys
+    maxItems: 5
+
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-fuzz-x: true
@@ -42,6 +45,18 @@
 
 additionalProperties: false
 
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: imagis,ist3032c
+    then:
+      properties:
+        linux,keycodes: false
+
 required:
   - compatible
   - reg
diff --git a/Bindings/input/touchscreen/imx6ul_tsc.txt b/Bindings/input/touchscreen/imx6ul_tsc.txt
deleted file mode 100644
index 1649150..0000000
--- a/Bindings/input/touchscreen/imx6ul_tsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Freescale i.MX6UL Touch Controller
-
-Required properties:
-- compatible: must be "fsl,imx6ul-tsc".
-- reg: this touch controller address and the ADC2 address.
-- interrupts: the interrupt of this touch controller and ADC2.
-- clocks: the root clock of touch controller and ADC2.
-- clock-names; must be "tsc" and "adc".
-- xnur-gpio: the X- gpio this controller connect to.
-  This xnur-gpio returns to low once the finger leave the touch screen (The
-  last touch event the touch controller capture).
-
-Optional properties:
-- measure-delay-time: the value of measure delay time.
-  Before X-axis or Y-axis measurement, the screen need some time before
-  even potential distribution ready.
-  This value depends on the touch screen.
-- pre-charge-time: the touch screen need some time to precharge.
-  This value depends on the touch screen.
-- touchscreen-average-samples: Number of data samples which are averaged for
-  each read. Valid values are 1, 4, 8, 16 and 32.
-
-Example:
-	tsc: tsc@2040000 {
-		compatible = "fsl,imx6ul-tsc";
-		reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6UL_CLK_IPG>,
-			 <&clks IMX6UL_CLK_ADC2>;
-		clock-names = "tsc", "adc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc>;
-		xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		measure-delay-time = <0xfff>;
-		pre-charge-time = <0xffff>;
-		touchscreen-average-samples = <32>;
-	};
diff --git a/Bindings/input/touchscreen/melfas,mms114.yaml b/Bindings/input/touchscreen/melfas,mms114.yaml
index 07f9dd6..90ebd4f 100644
--- a/Bindings/input/touchscreen/melfas,mms114.yaml
+++ b/Bindings/input/touchscreen/melfas,mms114.yaml
@@ -17,13 +17,17 @@
     pattern: "^touchscreen(@.*)?$"
 
   compatible:
-    items:
+    oneOf:
       - enum:
           - melfas,mms114
           - melfas,mms134s
           - melfas,mms136
           - melfas,mms152
           - melfas,mms345l
+      - items:
+          - enum:
+              - melfas,mms252
+          - const: melfas,mms114
 
   reg:
     description: I2C address
diff --git a/Bindings/input/touchscreen/silead,gsl1680.yaml b/Bindings/input/touchscreen/silead,gsl1680.yaml
index 95b554b..5381a96 100644
--- a/Bindings/input/touchscreen/silead,gsl1680.yaml
+++ b/Bindings/input/touchscreen/silead,gsl1680.yaml
@@ -31,7 +31,7 @@
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: >
       File basename for board specific firmware
 
diff --git a/Bindings/interconnect/qcom,rpm.yaml b/Bindings/interconnect/qcom,rpm.yaml
index 08c1c6b..5aaa92a 100644
--- a/Bindings/interconnect/qcom,rpm.yaml
+++ b/Bindings/interconnect/qcom,rpm.yaml
@@ -23,6 +23,9 @@
 
   compatible:
     enum:
+      - qcom,msm8909-bimc
+      - qcom,msm8909-pcnoc
+      - qcom,msm8909-snoc
       - qcom,msm8916-bimc
       - qcom,msm8916-pcnoc
       - qcom,msm8916-snoc
diff --git a/Bindings/interconnect/qcom,rpmh.yaml b/Bindings/interconnect/qcom,rpmh.yaml
index 74ab080..9318b84 100644
--- a/Bindings/interconnect/qcom,rpmh.yaml
+++ b/Bindings/interconnect/qcom,rpmh.yaml
@@ -8,7 +8,7 @@
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
-  - Odelu Kukatla <okukatla@codeaurora.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
 
 description: |
    RPMh interconnect providers support system bandwidth requirements through
diff --git a/Bindings/interconnect/qcom,sm7150-rpmh.yaml b/Bindings/interconnect/qcom,sm7150-rpmh.yaml
new file mode 100644
index 0000000..b565d1a
--- /dev/null
+++ b/Bindings/interconnect/qcom,sm7150-rpmh.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm7150-aggre1-noc
+      - qcom,sm7150-aggre2-noc
+      - qcom,sm7150-compute-noc
+      - qcom,sm7150-config-noc
+      - qcom,sm7150-dc-noc
+      - qcom,sm7150-gem-noc
+      - qcom,sm7150-mc-virt
+      - qcom,sm7150-mmss-noc
+      - qcom,sm7150-system-noc
+
+  reg:
+    maxItems: 1
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    allOf:
+      - $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm7150-camnoc-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mc_virt: interconnect@1380000 {
+        compatible = "qcom,sm7150-mc-virt";
+        reg = <0x01380000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm7150-system-noc";
+        reg = <0x01620000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        camnoc_virt: interconnect-0 {
+            compatible = "qcom,sm7150-camnoc-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
index 3d06db9..a937447 100644
--- a/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
+++ b/Bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -36,6 +36,7 @@
               - amlogic,meson-a1-gpio-intc
               - amlogic,meson-s4-gpio-intc
               - amlogic,c3-gpio-intc
+              - amlogic,t7-gpio-intc
           - const: amlogic,meson-gpio-intc
 
   reg:
diff --git a/Bindings/interrupt-controller/atmel,aic.txt b/Bindings/interrupt-controller/atmel,aic.txt
deleted file mode 100644
index 7079d44..0000000
--- a/Bindings/interrupt-controller/atmel,aic.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Advanced Interrupt Controller (AIC)
-
-Required properties:
-- compatible: Should be:
-    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
-      "sama5d3" or "sama5d4"
-    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
-
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
-  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-      Default flag for internal sources should be set to 4 (active high).
-  The third cell is used to specify the irq priority from 0 (lowest) to 7
-  (highest).
-- reg: Should contain AIC registers location and length
-- atmel,external-irqs: u32 array of external irqs.
-
-Examples:
-	/*
-	 * AIC
-	 */
-	aic: interrupt-controller@fffff000 {
-		compatible = "atmel,at91rm9200-aic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0xfffff000 0x200>;
-	};
-
-	/*
-	 * An interrupt generating device that is wired to an AIC.
-	 */
-	dma: dma-controller@ffffec00 {
-		compatible = "atmel,at91sam9g45-dma";
-		reg = <0xffffec00 0x200>;
-		interrupts = <21 4 5>;
-	};
diff --git a/Bindings/interrupt-controller/atmel,aic.yaml b/Bindings/interrupt-controller/atmel,aic.yaml
new file mode 100644
index 0000000..d4658fe
--- /dev/null
+++ b/Bindings/interrupt-controller/atmel,aic.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/atmel,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advanced Interrupt Controller (AIC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  The Advanced Interrupt Controller (AIC) is an 8-level priority, individually
+  maskable, vectored interrupt controller providing handling of up to one
+  hundred and twenty-eight interrupt sources.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-aic
+      - atmel,sama5d2-aic
+      - atmel,sama5d3-aic
+      - atmel,sama5d4-aic
+      - microchip,sam9x60-aic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the IRQ number (Peripheral IDentifier on datasheet).
+      The 2nd cell specifies flags:
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+        Valid combinations: 1, 2, 3, 4, 8.
+        Default for internal sources: 4 (active high).
+      The 3rd cell specifies irq priority from 0 (lowest) to 7 (highest).
+
+  interrupts:
+    maxItems: 1
+
+  atmel,external-irqs:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: u32 array of external irqs.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91rm9200-aic
+    then:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 7
+    else:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - atmel,external-irqs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@fffff000 {
+      compatible = "atmel,at91rm9200-aic";
+      reg = <0xfffff000 0x200>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      atmel,external-irqs = <31>;
+    };
+...
diff --git a/Bindings/interrupt-controller/fsl,intmux.yaml b/Bindings/interrupt-controller/fsl,intmux.yaml
index 985bfa4..78baa0a 100644
--- a/Bindings/interrupt-controller/fsl,intmux.yaml
+++ b/Bindings/interrupt-controller/fsl,intmux.yaml
@@ -37,6 +37,9 @@
   clock-names:
     const: ipg
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
new file mode 100644
index 0000000..e1a379c
--- /dev/null
+++ b/Bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mt6577-sysirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek sysirq
+
+description:
+  MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
+  interrupt.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-sysirq
+      - items:
+          - enum:
+              - mediatek,mt2701-sysirq
+              - mediatek,mt2712-sysirq
+              - mediatek,mt6580-sysirq
+              - mediatek,mt6582-sysirq
+              - mediatek,mt6589-sysirq
+              - mediatek,mt6592-sysirq
+              - mediatek,mt6755-sysirq
+              - mediatek,mt6765-sysirq
+              - mediatek,mt6779-sysirq
+              - mediatek,mt6795-sysirq
+              - mediatek,mt6797-sysirq
+              - mediatek,mt7622-sysirq
+              - mediatek,mt7623-sysirq
+              - mediatek,mt7629-sysirq
+              - mediatek,mt8127-sysirq
+              - mediatek,mt8135-sysirq
+              - mediatek,mt8173-sysirq
+              - mediatek,mt8183-sysirq
+              - mediatek,mt8365-sysirq
+              - mediatek,mt8516-sysirq
+          - const: mediatek,mt6577-sysirq
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    $ref: "arm,gic.yaml#/properties/#interrupt-cells"
+
+required:
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6797-sysirq
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@10200620 {
+        compatible = "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq";
+        reg = <0x10220620 0x20>,
+              <0x10220690 0x10>;
+        interrupt-parent = <&gic>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git a/Bindings/interrupt-controller/mediatek,sysirq.txt b/Bindings/interrupt-controller/mediatek,sysirq.txt
deleted file mode 100644
index 3ffc601..0000000
--- a/Bindings/interrupt-controller/mediatek,sysirq.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-MediaTek sysirq
-
-MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
-interrupt.
-
-Required properties:
-- compatible: should be
-	"mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
-	"mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
-	"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
-	"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
-	"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
-	"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
-	"mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
-	"mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
-	"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
-	"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
-	"mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
-	"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
-	"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
-	"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
-	"mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
-	"mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
-	"mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
-	"mediatek,mt6577-sysirq": for MT6577
-	"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
-	"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
-	"mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the intpol registers and length of memory
-  mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
-  need 1.
-
-Example:
-	sysirq: intpol-controller@10200620 {
-		compatible = "mediatek,mt6797-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10220620 0 0x20>,
-		      <0 0x10220690 0 0x10>;
-	};
diff --git a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index d3b5aec..daef4ee 100644
--- a/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ b/Bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -44,7 +44,7 @@
     maxItems: 1
 
   interrupts:
-    minItems: 41
+    minItems: 45
     items:
       - description: NMI interrupt
       - description: IRQ0 interrupt
@@ -88,9 +88,15 @@
       - description: GPIO interrupt, TINT30
       - description: GPIO interrupt, TINT31
       - description: Bus error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt
+      - description: ECCRAM1 1bit error interrupt
+      - description: ECCRAM1 2bit error interrupt
+      - description: ECCRAM1 error overflow interrupt
 
   interrupt-names:
-    minItems: 41
+    minItems: 45
     items:
       - const: nmi
       - const: irq0
@@ -134,6 +140,12 @@
       - const: tint30
       - const: tint31
       - const: bus-err
+      - const: ec7tie1-0
+      - const: ec7tie2-0
+      - const: ec7tiovf-0
+      - const: ec7tie1-1
+      - const: ec7tie2-1
+      - const: ec7tiovf-1
 
   clocks:
     maxItems: 2
@@ -156,6 +168,7 @@
   - interrupt-controller
   - reg
   - interrupts
+  - interrupt-names
   - clocks
   - clock-names
   - power-domains
@@ -169,16 +182,19 @@
         compatible:
           contains:
             enum:
-              - renesas,r9a07g043u-irqc
               - renesas,r9a08g045-irqc
     then:
       properties:
         interrupts:
-          minItems: 42
+          maxItems: 45
         interrupt-names:
-          minItems: 42
-      required:
-        - interrupt-names
+          maxItems: 45
+    else:
+      properties:
+        interrupts:
+          minItems: 48
+        interrupt-names:
+          minItems: 48
 
 unevaluatedProperties: false
 
@@ -233,7 +249,14 @@
                      <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
         interrupt-names = "nmi",
                           "irq0", "irq1", "irq2", "irq3",
                           "irq4", "irq5", "irq6", "irq7",
@@ -244,7 +267,10 @@
                           "tint16", "tint17", "tint18", "tint19",
                           "tint20", "tint21", "tint22", "tint23",
                           "tint24", "tint25", "tint26", "tint27",
-                          "tint28", "tint29", "tint30", "tint31";
+                          "tint28", "tint29", "tint30", "tint31",
+                          "bus-err", "ec7tie1-0", "ec7tie2-0",
+                          "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+                          "ec7tiovf-1";
         clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
                  <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
         clock-names = "clk", "pclk";
diff --git a/Bindings/interrupt-controller/starfive,jh8100-intc.yaml b/Bindings/interrupt-controller/starfive,jh8100-intc.yaml
new file mode 100644
index 0000000..ada5788
--- /dev/null
+++ b/Bindings/interrupt-controller/starfive,jh8100-intc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/starfive,jh8100-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive External Interrupt Controller
+
+description:
+  StarFive SoC JH8100 contain a external interrupt controller. It can be used
+  to handle high-level input interrupt signals. It also send the output
+  interrupt signal to RISC-V PLIC.
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh8100-intc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: APB clock for the interrupt controller
+    maxItems: 1
+
+  resets:
+    description: APB reset for the interrupt controller
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@12260000 {
+      compatible = "starfive,jh8100-intc";
+      reg = <0x12260000 0x10000>;
+      clocks = <&syscrg_ne 76>;
+      resets = <&syscrg_ne 13>;
+      interrupts = <45>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git a/Bindings/iommu/arm,smmu.yaml b/Bindings/iommu/arm,smmu.yaml
index a4042ae..5c130cf 100644
--- a/Bindings/iommu/arm,smmu.yaml
+++ b/Bindings/iommu/arm,smmu.yaml
@@ -83,6 +83,7 @@
       - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
         items:
           - enum:
+              - qcom,qcm2290-smmu-500
               - qcom,sa8775p-smmu-500
               - qcom,sc7280-smmu-500
               - qcom,sc8280xp-smmu-500
@@ -93,6 +94,7 @@
               - qcom,sm8350-smmu-500
               - qcom,sm8450-smmu-500
               - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
           - const: qcom,adreno-smmu
           - const: qcom,smmu-500
           - const: arm,mmu-500
@@ -462,6 +464,7 @@
         compatible:
           items:
             - enum:
+                - qcom,qcm2290-smmu-500
                 - qcom,sm6115-smmu-500
                 - qcom,sm6125-smmu-500
             - const: qcom,adreno-smmu
@@ -484,7 +487,12 @@
   - if:
       properties:
         compatible:
-          const: qcom,sm8450-smmu-500
+          items:
+            - const: qcom,sm8450-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+
     then:
       properties:
         clock-names:
@@ -508,7 +516,13 @@
   - if:
       properties:
         compatible:
-          const: qcom,sm8550-smmu-500
+          items:
+            - enum:
+                - qcom,sm8550-smmu-500
+                - qcom,sm8650-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
     then:
       properties:
         clock-names:
@@ -534,7 +548,6 @@
               - cavium,smmu-v2
               - marvell,ap806-smmu-500
               - nvidia,smmu-500
-              - qcom,qcm2290-smmu-500
               - qcom,qdu1000-smmu-500
               - qcom,sc7180-smmu-500
               - qcom,sc8180x-smmu-500
@@ -544,7 +557,6 @@
               - qcom,sdx65-smmu-500
               - qcom,sm6350-smmu-500
               - qcom,sm6375-smmu-500
-              - qcom,sm8650-smmu-500
               - qcom,x1e80100-smmu-500
     then:
       properties:
diff --git a/Bindings/leds/backlight/kinetic,ktd2801.yaml b/Bindings/leds/backlight/kinetic,ktd2801.yaml
new file mode 100644
index 0000000..b005065
--- /dev/null
+++ b/Bindings/leds/backlight/kinetic,ktd2801.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD2801 one-wire backlight
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The Kinetic Technologies KTD2801 is a LED backlight driver controlled
+  by a single GPIO line. The driver can be controlled with a PWM signal
+  or by pulsing the GPIO line to set the backlight level. This is called
+  "ExpressWire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd2801
+
+  ctrl-gpios:
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight {
+        compatible = "kinetic,ktd2801";
+        ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+        max-brightness = <210>;
+        default-brightness = <100>;
+    };
diff --git a/Bindings/leds/backlight/qcom-wled.yaml b/Bindings/leds/backlight/qcom-wled.yaml
index 5f1849b..a849078 100644
--- a/Bindings/leds/backlight/qcom-wled.yaml
+++ b/Bindings/leds/backlight/qcom-wled.yaml
@@ -7,8 +7,8 @@
 title: Qualcomm Technologies, Inc. WLED driver
 
 maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Kiran Gunda <kgunda@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
+  - Kiran Gunda <quic_kgunda@quicinc.com>
 
 description: |
   WLED (White Light Emitting Diode) driver is used for controlling display
diff --git a/Bindings/leds/common.yaml b/Bindings/leds/common.yaml
index 55a8d13..8a3c239 100644
--- a/Bindings/leds/common.yaml
+++ b/Bindings/leds/common.yaml
@@ -200,6 +200,18 @@
       #trigger-source-cells property in the source node.
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  active-low:
+    type: boolean
+    description:
+      Makes LED active low. To turn the LED ON, line needs to be
+      set to low voltage instead of high.
+
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
diff --git a/Bindings/leds/leds-bcm63138.yaml b/Bindings/leds/leds-bcm63138.yaml
index 52252fb..bb20394 100644
--- a/Bindings/leds/leds-bcm63138.yaml
+++ b/Bindings/leds/leds-bcm63138.yaml
@@ -52,10 +52,6 @@
         maxItems: 1
         description: LED pin number
 
-      active-low:
-        type: boolean
-        description: Makes LED active low
-
     required:
       - reg
 
diff --git a/Bindings/leds/leds-bcm6328.yaml b/Bindings/leds/leds-bcm6328.yaml
index 51cc0d8..f3a3ef9 100644
--- a/Bindings/leds/leds-bcm6328.yaml
+++ b/Bindings/leds/leds-bcm6328.yaml
@@ -78,10 +78,6 @@
           - maximum: 23
         description: LED pin number (only LEDs 0 to 23 are valid).
 
-      active-low:
-        type: boolean
-        description: Makes LED active low.
-
       brcm,hardware-controlled:
         type: boolean
         description: Makes this LED hardware controlled.
diff --git a/Bindings/leds/leds-bcm6358.txt b/Bindings/leds/leds-bcm6358.txt
index 6e51c6b..211ffc3 100644
--- a/Bindings/leds/leds-bcm6358.txt
+++ b/Bindings/leds/leds-bcm6358.txt
@@ -25,8 +25,6 @@
 
 LED sub-node optional properties:
   - label : see Documentation/devicetree/bindings/leds/common.txt
-  - active-low : Boolean, makes LED active low.
-    Default : false
   - default-state : see
     Documentation/devicetree/bindings/leds/common.txt
   - linux,default-trigger : see
diff --git a/Bindings/leds/leds-pwm-multicolor.yaml b/Bindings/leds/leds-pwm-multicolor.yaml
index bd6ec04..a31a202 100644
--- a/Bindings/leds/leds-pwm-multicolor.yaml
+++ b/Bindings/leds/leds-pwm-multicolor.yaml
@@ -41,9 +41,7 @@
 
           pwm-names: true
 
-          active-low:
-            description: For PWMs where the LED is wired to supply rather than ground.
-            type: boolean
+          active-low: true
 
           color: true
 
diff --git a/Bindings/leds/leds-pwm.yaml b/Bindings/leds/leds-pwm.yaml
index 7de6da5..113b7c2 100644
--- a/Bindings/leds/leds-pwm.yaml
+++ b/Bindings/leds/leds-pwm.yaml
@@ -34,11 +34,6 @@
           Maximum brightness possible for the LED
         $ref: /schemas/types.yaml#/definitions/uint32
 
-      active-low:
-        description:
-          For PWMs where the LED is wired to supply rather than ground.
-        type: boolean
-
     required:
       - pwms
       - max-brightness
diff --git a/Bindings/leds/leds-qcom-lpg.yaml b/Bindings/leds/leds-qcom-lpg.yaml
index ea84ad4..54a428d 100644
--- a/Bindings/leds/leds-qcom-lpg.yaml
+++ b/Bindings/leds/leds-qcom-lpg.yaml
@@ -11,7 +11,7 @@
 
 description: >
   The Qualcomm Light Pulse Generator consists of three different hardware blocks;
-  a ramp generator with lookup table, the light pulse generator and a three
+  a ramp generator with lookup table (LUT), the light pulse generator and a three
   channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
 
 properties:
@@ -63,6 +63,29 @@
         - description: dtest line to attach
         - description: flags for the attachment
 
+  nvmem:
+    description: >
+      This property is required for PMICs that supports PPG, which is when a
+      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+      to both SDAM modules need to be specified.
+    minItems: 1
+    maxItems: 2
+
+  nvmem-names:
+    minItems: 1
+    items:
+      - const: lpg_chan_sdam
+      - const: lut_sdam
+
+  qcom,pbs:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+      PBS node is used to trigger LPG pattern sequences for PMICs that support
+      single SDAM PPG.
+
   multi-led:
     type: object
     $ref: leds-class-multicolor.yaml#
@@ -106,6 +129,52 @@
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-lpg
+              - qcom,pm8150b-lpg
+              - qcom,pm8150l-lpg
+              - qcom,pm8916-pwm
+              - qcom,pm8941-lpg
+              - qcom,pm8994-lpg
+              - qcom,pmc8180c-lpg
+              - qcom,pmi8994-lpg
+              - qcom,pmi8998-lpg
+              - qcom,pmk8550-pwm
+    then:
+      properties:
+        nvmem: false
+        nvmem-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi632-lpg
+    then:
+      properties:
+        nvmem:
+          maxItems: 1
+        nvmem-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8350c-pwm
+    then:
+      properties:
+        nvmem:
+          minItems: 2
+        nvmem-names:
+          minItems: 2
+
 examples:
   - |
     #include <dt-bindings/leds/common.h>
@@ -191,4 +260,35 @@
       compatible = "qcom,pm8916-pwm";
       #pwm-cells = <2>;
     };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi632-lpg";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #pwm-cells = <2>;
+      nvmem-names = "lpg_chan_sdam";
+      nvmem = <&pmi632_sdam_7>;
+      qcom,pbs = <&pmi632_pbs_client3>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_RED>;
+        label = "red";
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        label = "green";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_BLUE>;
+        label = "blue";
+      };
+    };
+
 ...
diff --git a/Bindings/leds/onnn,ncp5623.yaml b/Bindings/leds/onnn,ncp5623.yaml
new file mode 100644
index 0000000..9c9f3a6
--- /dev/null
+++ b/Bindings/leds/onnn,ncp5623.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor NCP5623 multi-LED Driver
+
+maintainers:
+  - Abdel Alkuor <alkuor@gmail.com>
+
+description:
+  NCP5623 Triple Output I2C Controlled LED Driver.
+  https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf
+
+properties:
+  compatible:
+    enum:
+      - onnn,ncp5623
+
+  reg:
+    const: 0x38
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 2
+
+        required:
+          - reg
+          - color
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - multi-led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+            compatible = "onnn,ncp5623";
+            reg = <0x38>;
+
+            multi-led {
+                color = <LED_COLOR_ID_RGB>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };
diff --git a/Bindings/mailbox/fsl,mu.yaml b/Bindings/mailbox/fsl,mu.yaml
index 12e7a7d..00631af 100644
--- a/Bindings/mailbox/fsl,mu.yaml
+++ b/Bindings/mailbox/fsl,mu.yaml
@@ -29,8 +29,11 @@
       - const: fsl,imx8ulp-mu
       - const: fsl,imx8-mu-scu
       - const: fsl,imx8-mu-seco
-      - const: fsl,imx93-mu-s4
       - const: fsl,imx8ulp-mu-s4
+      - const: fsl,imx93-mu-s4
+      - const: fsl,imx95-mu
+      - const: fsl,imx95-mu-ele
+      - const: fsl,imx95-mu-v2x
       - items:
           - const: fsl,imx93-mu
           - const: fsl,imx8ulp-mu
@@ -95,6 +98,19 @@
   power-domains:
     maxItems: 1
 
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^sram@[a-f0-9]+":
+    $ref: /schemas/sram/sram.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -122,6 +138,15 @@
         required:
           - interrupt-names
 
+  - if:
+      not:
+        properties:
+          compatible:
+            const: fsl,imx95-mu
+    then:
+      patternProperties:
+        "^sram@[a-f0-9]+": false
+
 additionalProperties: false
 
 examples:
@@ -134,3 +159,34 @@
         interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
         #mbox-cells = <2>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@445b0000 {
+        compatible = "fsl,imx95-mu";
+        reg = <0x445b0000 0x10000>;
+        ranges;
+        interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #mbox-cells = <2>;
+
+        sram@445b1000 {
+            compatible = "mmio-sram";
+            reg = <0x445b1000 0x400>;
+            ranges = <0x0 0x445b1000 0x400>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            scmi-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+
+            scmi-sram-section@80 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x80 0x80>;
+            };
+        };
+    };
diff --git a/Bindings/media/i2c/techwell,tw9900.yaml b/Bindings/media/i2c/techwell,tw9900.yaml
index e37317f..c967339 100644
--- a/Bindings/media/i2c/techwell,tw9900.yaml
+++ b/Bindings/media/i2c/techwell,tw9900.yaml
@@ -36,7 +36,7 @@
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
+        $ref: /schemas/graph.yaml#/properties/port
         description: Analog input port
 
         properties:
diff --git a/Bindings/media/mediatek,vcodec-encoder.yaml b/Bindings/media/mediatek,vcodec-encoder.yaml
index a2051b3..b45743d 100644
--- a/Bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Bindings/media/mediatek,vcodec-encoder.yaml
@@ -16,14 +16,18 @@
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt8173-vcodec-enc-vp8
-      - mediatek,mt8173-vcodec-enc
-      - mediatek,mt8183-vcodec-enc
-      - mediatek,mt8188-vcodec-enc
-      - mediatek,mt8192-vcodec-enc
-      - mediatek,mt8195-vcodec-enc
-
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
+      - items:
+          - const: mediatek,mt8186-vcodec-enc
+          - const: mediatek,mt8183-vcodec-enc
   reg:
     maxItems: 1
 
@@ -109,10 +113,7 @@
       properties:
         compatible:
           enum:
-            - mediatek,mt8173-vcodec-enc
-            - mediatek,mt8188-vcodec-enc
-            - mediatek,mt8192-vcodec-enc
-            - mediatek,mt8195-vcodec-enc
+            - mediatek,mt8173-vcodec-enc-vp8
 
     then:
       properties:
@@ -122,8 +123,8 @@
             maxItems: 1
         clock-names:
           items:
-            - const: venc_sel
-    else:  # for vp8 hw encoder
+            - const: venc_lt_sel
+    else:
       properties:
         clock:
           items:
@@ -131,7 +132,7 @@
             maxItems: 1
         clock-names:
           items:
-            - const: venc_lt_sel
+            - const: venc_sel
 
 additionalProperties: false
 
diff --git a/Bindings/media/mediatek-jpeg-encoder.yaml b/Bindings/media/mediatek-jpeg-encoder.yaml
index 37800e1..83c020a 100644
--- a/Bindings/media/mediatek-jpeg-encoder.yaml
+++ b/Bindings/media/mediatek-jpeg-encoder.yaml
@@ -38,7 +38,8 @@
     maxItems: 1
 
   iommus:
-    maxItems: 2
+    minItems: 2
+    maxItems: 4
     description: |
       Points to the respective IOMMU block with master port as argument, see
       Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
diff --git a/Bindings/media/rockchip-isp1.yaml b/Bindings/media/rockchip-isp1.yaml
index afcaa427..6be00ac 100644
--- a/Bindings/media/rockchip-isp1.yaml
+++ b/Bindings/media/rockchip-isp1.yaml
@@ -16,6 +16,7 @@
 properties:
   compatible:
     enum:
+      - fsl,imx8mp-isp
       - rockchip,px30-cif-isp
       - rockchip,rk3399-cif-isp
 
@@ -36,9 +37,9 @@
     minItems: 3
     items:
       # isp0 and isp1
-      - description: ISP clock
-      - description: ISP AXI clock
-      - description: ISP AHB clock
+      - description: ISP clock (for imx8mp, clk)
+      - description: ISP AXI clock (for imx8mp, m_hclk)
+      - description: ISP AHB clock (for imx8mp, hclk)
       # only for isp1
       - description: ISP Pixel clock
 
@@ -52,6 +53,13 @@
       # only for isp1
       - const: pclk
 
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to the media block control for the ISP, followed by a cell
+      containing the index of the gasket.
+
   iommus:
     maxItems: 1
 
@@ -113,9 +121,6 @@
   - interrupts
   - clocks
   - clock-names
-  - iommus
-  - phys
-  - phy-names
   - power-domains
   - ports
 
@@ -143,6 +148,26 @@
       required:
         - interrupt-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isp
+    then:
+      properties:
+        iommus: false
+        phys: false
+        phy-names: false
+      required:
+        - fsl,blk-ctrl
+    else:
+      properties:
+        fsl,blk-ctrl: false
+      required:
+        - iommus
+        - phys
+        - phy-names
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/media/st,stm32mp25-video-codec.yaml b/Bindings/media/st,stm32mp25-video-codec.yaml
new file mode 100644
index 0000000..b8611bc
--- /dev/null
+++ b/Bindings/media/st,stm32mp25-video-codec.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32mp25-video-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 VDEC video decoder & VENC video encoder
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+
+description:
+  The STMicroelectronics STM32MP25 SOCs embeds a VDEC video hardware
+  decoder peripheral based on Verisilicon VC8000NanoD IP (former Hantro G1)
+  and a VENC video hardware encoder peripheral based on Verisilicon
+  VC8000NanoE IP (former Hantro H1).
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-vdec
+      - st,stm32mp25-venc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    video-codec@580d0000 {
+        compatible = "st,stm32mp25-vdec";
+        reg = <0x580d0000 0x3c8>;
+        interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ck_icn_p_vdec>;
+    };
diff --git a/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml b/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
new file mode 100644
index 0000000..82fc5f4
--- /dev/null
+++ b/Bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX WEIM Bus Peripheral Nodes
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  This binding is meant for the child nodes of the WEIM node. The node
+  represents any device connected to the WEIM bus. It may be a Flash chip,
+  RAM chip or Ethernet controller, etc. These properties are meant for
+  configuring the WEIM settings/timings and will accompany the bindings
+  supported by the respective device.
+
+properties:
+  reg: true
+
+  fsl,weim-cs-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Timing values for the child node.
+    minItems: 2
+    maxItems: 6
+
+# the WEIM child will have its own native properties
+additionalProperties: true
diff --git a/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml b/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml
new file mode 100644
index 0000000..3f40ca5
--- /dev/null
+++ b/Bindings/memory-controllers/fsl/fsl,imx-weim.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX Wireless External Interface Module (WEIM)
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  The term "wireless" does not imply that the WEIM is literally an interface
+  without wires. It simply means that this module was originally designed for
+  wireless and mobile applications that use low-power technology. The actual
+  devices are instantiated from the child nodes of a WEIM node.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-weim
+          - fsl,imx27-weim
+          - fsl,imx50-weim
+          - fsl,imx51-weim
+          - fsl,imx6q-weim
+      - items:
+          - enum:
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+          - const: fsl,imx27-weim
+      - items:
+          - enum:
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+          - const: fsl,imx6q-weim
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+  fsl,weim-cs-gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the system General Purpose Register controller that contains
+      WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
+      should be set up as one of the following 4 possible values depending on
+      the CS space configuration.
+
+      IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+      ---------------------------------------------
+              05          128M     0M     0M     0M
+              033          64M    64M     0M     0M
+              0113         64M    32M    32M     0M
+              01111        32M    32M    32M    32M
+
+      In case that the property is absent, the reset value or what bootloader
+      sets up in IOMUXC_GPR1[11:0] will be used.
+
+  fsl,burst-clk-enable:
+    type: boolean
+    description:
+      The presence of this property indicates that the weim bus should operate
+      in Burst Clock Mode.
+
+  fsl,continuous-burst-clk:
+    type: boolean
+    description:
+      Make Burst Clock to output continuous clock. Without this option Burst
+      Clock will output clock only when necessary.
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    type: object
+    description: Devices attached to chip selects are represented as subnodes.
+    $ref: fsl,imx-weim-peripherals.yaml
+    additionalProperties: true
+    required:
+      - fsl,weim-cs-timing
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx50-weim
+                - fsl,imx6q-weim
+    then:
+      properties:
+        fsl,weim-cs-gpr: false
+        fsl,burst-clk-enable: false
+  - if:
+      not:
+        required:
+          - fsl,burst-clk-enable
+    then:
+      properties:
+        fsl,continuous-burst-clk: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx1-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSxU
+                  - description: CSxL
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx27-weim
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSCRxU
+                  - description: CSCRxL
+                  - description: CSCRxA
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx50-weim
+              - fsl,imx51-weim
+              - fsl,imx6q-weim
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                items:
+                  - description: CSxGCR1
+                  - description: CSxGCR2
+                  - description: CSxRCR1
+                  - description: CSxRCR2
+                  - description: CSxWCR1
+                  - description: CSxWCR2
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@21b8000 {
+        compatible = "fsl,imx6q-weim";
+        reg = <0x021b8000 0x4000>;
+        clocks = <&clks 196>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0 0x08000000 0x08000000>;
+        fsl,weim-cs-gpr = <&gpr>;
+
+        flash@0,0 {
+            compatible = "cfi-flash";
+            reg = <0 0 0x02000000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            bank-width = <2>;
+            fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+                                  0x0000c000 0x1404a38e 0x00000000>;
+        };
+    };
diff --git a/Bindings/memory-controllers/mc-peripheral-props.yaml b/Bindings/memory-controllers/mc-peripheral-props.yaml
index 8d9dae1..00deeb0 100644
--- a/Bindings/memory-controllers/mc-peripheral-props.yaml
+++ b/Bindings/memory-controllers/mc-peripheral-props.yaml
@@ -37,5 +37,6 @@
   - $ref: ingenic,nemc-peripherals.yaml#
   - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
   - $ref: ti,gpmc-child.yaml#
+  - $ref: fsl/fsl,imx-weim-peripherals.yaml
 
 additionalProperties: true
diff --git a/Bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Bindings/memory-controllers/nvidia,tegra20-emc.yaml
index f54e553..71896cb 100644
--- a/Bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -145,7 +145,7 @@
   "^emc-table@[0-9]+$":
     $ref: "#/$defs/emc-table"
 
-  "^emc-tables@[a-z0-9-]+$":
+  "^emc-tables@[a-f0-9-]+$":
     type: object
     properties:
       reg:
diff --git a/Bindings/memory-controllers/renesas,rpc-if.yaml b/Bindings/memory-controllers/renesas,rpc-if.yaml
index 25f3bb9..d7745dd 100644
--- a/Bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Bindings/memory-controllers/renesas,rpc-if.yaml
@@ -45,6 +45,7 @@
       - items:
           - enum:
               - renesas,r8a779g0-rpc-if       # R-Car V4H
+              - renesas,r8a779h0-rpc-if       # R-Car V4M
           - const: renesas,rcar-gen4-rpc-if   # a generic R-Car gen4 device
 
       - items:
diff --git a/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 14f1833..84ac6f5 100644
--- a/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -23,7 +23,9 @@
 
 properties:
   compatible:
-    const: st,stm32mp1-fmc2-ebi
+    enum:
+      - st,stm32mp1-fmc2-ebi
+      - st,stm32mp25-fmc2-ebi
 
   reg:
     maxItems: 1
@@ -34,6 +36,9 @@
   resets:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   "#address-cells":
     const: 2
 
diff --git a/Bindings/mfd/atmel,hlcdc.yaml b/Bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 0000000..4aa3690
--- /dev/null
+++ b/Bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+  subdevices, a PWM chip and a Display Controller.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9n12-hlcdc
+      - atmel,at91sam9x5-hlcdc
+      - atmel,sama5d2-hlcdc
+      - atmel,sama5d3-hlcdc
+      - atmel,sama5d4-hlcdc
+      - microchip,sam9x60-hlcdc
+      - microchip,sam9x75-xlcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: periph_clk
+      - const: sys_clk
+      - const: slow_clk
+      - const: lvds_pll_clk
+    minItems: 3
+
+  display-controller:
+    $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+  pwm:
+    $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd_controller: lcd-controller@f0030000 {
+      compatible = "atmel,sama5d3-hlcdc";
+      reg = <0xf0030000 0x2000>;
+      clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+      clock-names = "periph_clk", "sys_clk", "slow_clk";
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+      display-controller {
+        compatible = "atmel,hlcdc-display-controller";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0>;
+
+          hlcdc_panel_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "atmel,hlcdc-pwm";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_pwm>;
+        #pwm-cells = <3>;
+      };
+    };
diff --git a/Bindings/mfd/atmel,sama5d2-flexcom.yaml b/Bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 0000000..0dc6a40
--- /dev/null
+++ b/Bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+  The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+  an I2C controller and an USART. Only one function can be used at a
+  time and is chosen at boot time according to the device tree.
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sam9x7-flexcom
+          - const: atmel,sama5d2-flexcom
+      - items:
+          - const: microchip,sama7g5-flexcom
+          - const: atmel,sama5d2-flexcom
+
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      One range for the full I/O register region. (including USART,
+      TWI and SPI registers).
+    items:
+      maxItems: 3
+
+  atmel,flexcom-mode:
+    description: |
+      Specifies the flexcom mode as follows:
+      1: USART
+      2: SPI
+      3: I2C.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+patternProperties:
+  "^serial@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing USART. See atmel-usart.txt for details
+      of USART bindings.
+
+  "^spi@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing SPI. See ../spi/spi_atmel.txt for details
+      of SPI bindings.
+
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+    description:
+      Child node describing I2C.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx0: flexcom@f8034000 {
+        compatible = "atmel,sama5d2-flexcom";
+        reg = <0xf8034000 0x200>;
+        clocks = <&flx0_clk>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf8034000 0x800>;
+        atmel,flexcom-mode = <2>;
+    };
+...
diff --git a/Bindings/mfd/atmel-flexcom.txt b/Bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index af692e8..0000000
--- a/Bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
-			or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
-- reg:			Should be the offset/length value for Flexcom dedicated
-			I/O registers (without USART, TWI or SPI registers).
-- clocks:		Should be the Flexcom peripheral clock from PMC.
-- #address-cells:	Should be <1>
-- #size-cells:		Should be <1>
-- ranges:		Should be one range for the full I/O register region
-			(including USART, TWI and SPI registers).
-- atmel,flexcom-mode:	Should be one of the following values:
-			- <1> for USART
-			- <2> for SPI
-			- <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
-	compatible = "atmel,sama5d2-flexcom";
-	reg = <0xf8034000 0x200>;
-	clocks = <&flx0_clk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0xf8034000 0x800>;
-	atmel,flexcom-mode = <2>;
-
-	spi@400 {
-		compatible = "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&flx0_clk>;
-		clock-names = "spi_clk";
-		atmel,fifo-size = <32>;
-
-		flash@0 {
-			compatible = "atmel,at25f512b";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-};
diff --git a/Bindings/mfd/atmel-hlcdc.txt b/Bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 7de696e..0000000
--- a/Bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,at91sam9n12-hlcdc"
-   "atmel,at91sam9x5-hlcdc"
-   "atmel,sama5d2-hlcdc"
-   "atmel,sama5d3-hlcdc"
-   "atmel,sama5d4-hlcdc"
-   "microchip,sam9x60-hlcdc"
-   "microchip,sam9x75-xlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
-   Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git a/Bindings/mfd/da9062.txt b/Bindings/mfd/da9062.txt
deleted file mode 100644
index e4eedd3..0000000
--- a/Bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-rtc              :               : Real-Time Clock
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-da9062-gpio             :               : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
-    "dlg,da9062" for DA9062
-    "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells     : Should be two. The first cell is the pin number and the
-                    second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9062 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    buck4    : BUCK_4
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The DA9061 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-  regulator-initial-mode may be specified for buck regulators using mode values
-  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
-  with the DA9062. There are currently no entries in this binding, however
-  compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/da9062-onkey.txt
-
-- watchdog: See ../watchdog/da9062-wdt.txt
-
-- thermal : See ../thermal/da9062-thermal.txt
-
-Example:
-
-	pmic0: da9062@58 {
-		compatible = "dlg,da9062";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		regulators {
-			DA9062_BUCK1: buck1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-boot-on;
-			};
-			DA9062_LDO1: ldo1 {
-				regulator-name = "LDO_1";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Bindings/mfd/dlg,da9063.yaml b/Bindings/mfd/dlg,da9063.yaml
index c5a7e10..51612dc 100644
--- a/Bindings/mfd/dlg,da9063.yaml
+++ b/Bindings/mfd/dlg,da9063.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC)
 
 maintainers:
   - Steve Twiss <stwiss.opensource@diasemi.com>
@@ -17,10 +17,17 @@
   moment where all voltage monitors are disabled. Next, as da9063 only supports
   UV *and* OV monitoring, both must be set to the same severity and value
   (0: disable, 1: enable).
+  Product information for the DA906{3L,3,2,1} devices can be found here:
+  - https://www.dialog-semiconductor.com/products/da9063l
+  - https://www.dialog-semiconductor.com/products/da9063
+  - https://www.dialog-semiconductor.com/products/da9062
+  - https://www.dialog-semiconductor.com/products/da9061
 
 properties:
   compatible:
     enum:
+      - dlg,da9061
+      - dlg,da9062
       - dlg,da9063
       - dlg,da9063l
 
@@ -35,20 +42,28 @@
   "#interrupt-cells":
     const: 2
 
-  dlg,use-sw-pm:
-    type: boolean
-    description:
-      Disable the watchdog during suspend.
-      Only use this option if you can't use the watchdog automatic suspend
-      function during a suspend (see register CONTROL_B).
+  gpio-controller: true
 
-  watchdog:
+  "#gpio-cells":
+    const: 2
+
+  gpio:
     type: object
-    $ref: /schemas/watchdog/watchdog.yaml#
-    unevaluatedProperties: false
+    additionalProperties: false
     properties:
       compatible:
-        const: dlg,da9063-watchdog
+        const: dlg,da9062-gpio
+
+  onkey:
+    $ref: /schemas/input/dlg,da9062-onkey.yaml
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
 
   rtc:
     type: object
@@ -56,37 +71,86 @@
     unevaluatedProperties: false
     properties:
       compatible:
-        const: dlg,da9063-rtc
+        enum:
+          - dlg,da9062-rtc
+          - dlg,da9063-rtc
 
-  onkey:
+  thermal:
+    $ref: /schemas/thermal/dlg,da9062-thermal.yaml
+
+  watchdog:
+    $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
     type: object
-    $ref: /schemas/input/input.yaml#
-    unevaluatedProperties: false
-    properties:
-      compatible:
-        const: dlg,da9063-onkey
 
-      dlg,disable-key-power:
-        type: boolean
-        description: |
-          Disable power-down using a long key-press.
-          If this entry does not exist then by default the key-press triggered
-          power down is enabled and the OnKey will support both KEY_POWER and
-          KEY_SLEEP.
-
-  regulators:
-    type: object
-    additionalProperties: false
-    patternProperties:
-      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
-        $ref: /schemas/regulator/regulator.yaml
-        unevaluatedProperties: false
+    required:
+      - gpio-hog
 
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9063
+              - dlg,da9063l
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^buck[1-4]$": false
+        thermal: false
+      required:
+        - interrupts
+        - interrupt-controller
+        - '#interrupt-cells'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9062
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
+      required:
+        - gpio
+        - onkey
+        - rtc
+        - thermal
+        - watchdog
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9061
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
+        rtc: false
+      required:
+        - onkey
+        - thermal
+        - watchdog
 
 additionalProperties: false
 
@@ -99,10 +163,10 @@
       pmic@58 {
         compatible = "dlg,da9063";
         reg = <0x58>;
-        #interrupt-cells = <2>;
         interrupt-parent = <&gpio6>;
         interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
         interrupt-controller;
+        #interrupt-cells = <2>;
 
         rtc {
           compatible = "dlg,da9063-rtc";
@@ -143,4 +207,121 @@
         };
       };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9062";
+        reg = <0x58>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        sd0-pwr-sel-hog {
+          gpio-hog;
+          gpios = <1 0>;
+          input;
+          line-name = "SD0_PWR_SEL";
+        };
+
+        sd1-pwr-sel-hog {
+          gpio-hog;
+          gpios = <2 0>;
+          input;
+          line-name = "SD1_PWR_SEL";
+        };
+
+        sw-et0-en-hog {
+          gpio-hog;
+          gpios = <3 0>;
+          input;
+          line-name = "SW_ET0_EN#";
+        };
+
+        pmic-good-hog {
+          gpio-hog;
+          gpios = <4 0>;
+          output-high;
+          line-name = "PMIC_PGOOD";
+        };
+
+        gpio {
+          compatible = "dlg,da9062-gpio";
+        };
+
+        onkey {
+          compatible = "dlg,da9062-onkey";
+        };
+
+        regulators {
+          buck1 {
+            regulator-name = "vdd_arm";
+            regulator-min-microvolt = <925000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck2 {
+            regulator-name = "vdd_soc";
+            regulator-min-microvolt = <1150000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "vdd_ddr3";
+            regulator-min-microvolt = <1500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "vdd_eth";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          ldo1 {
+            regulator-name = "vdd_snvs";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo2 {
+            regulator-name = "vdd_high";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo3 {
+            regulator-name = "vdd_eth_io";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+          ldo4 {
+            regulator-name = "vdd_emmc";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+
+        rtc {
+          compatible = "dlg,da9062-rtc";
+        };
+
+        thermal {
+          compatible = "dlg,da9062-thermal";
+        };
+
+        watchdog {
+          compatible = "dlg,da9062-watchdog";
+          dlg,use-sw-pm;
+        };
+      };
+    };
 ...
diff --git a/Bindings/mfd/google,cros-ec.yaml b/Bindings/mfd/google,cros-ec.yaml
index e1ca4f2..aac8819 100644
--- a/Bindings/mfd/google,cros-ec.yaml
+++ b/Bindings/mfd/google,cros-ec.yaml
@@ -93,6 +93,11 @@
   '#size-cells':
     const: 0
 
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
   typec:
     $ref: /schemas/chrome/google,cros-ec-typec.yaml#
 
@@ -275,6 +280,8 @@
             interrupts = <99 0>;
             interrupt-parent = <&gpio7>;
             spi-max-frequency = <5000000>;
+            #gpio-cells = <2>;
+            gpio-controller;
 
             proximity {
                 compatible = "google,cros-ec-mkbp-proximity";
diff --git a/Bindings/mfd/iqs62x.yaml b/Bindings/mfd/iqs62x.yaml
index 044cd75..f438c23 100644
--- a/Bindings/mfd/iqs62x.yaml
+++ b/Bindings/mfd/iqs62x.yaml
@@ -31,7 +31,7 @@
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Specifies the name of the calibration and configuration file selected by
       the driver. If this property is omitted, the name is chosen based on the
diff --git a/Bindings/mfd/qcom,tcsr.yaml b/Bindings/mfd/qcom,tcsr.yaml
index 798705a..b97d770 100644
--- a/Bindings/mfd/qcom,tcsr.yaml
+++ b/Bindings/mfd/qcom,tcsr.yaml
@@ -19,6 +19,7 @@
       - enum:
           - qcom,msm8976-tcsr
           - qcom,msm8998-tcsr
+          - qcom,qcm2290-tcsr
           - qcom,qcs404-tcsr
           - qcom,sc7180-tcsr
           - qcom,sc7280-tcsr
@@ -28,6 +29,7 @@
           - qcom,sdx55-tcsr
           - qcom,sdx65-tcsr
           - qcom,sm4450-tcsr
+          - qcom,sm6115-tcsr
           - qcom,sm8150-tcsr
           - qcom,sm8250-tcsr
           - qcom,sm8350-tcsr
diff --git a/Bindings/mfd/syscon.yaml b/Bindings/mfd/syscon.yaml
index 084b5c2..9d55bee 100644
--- a/Bindings/mfd/syscon.yaml
+++ b/Bindings/mfd/syscon.yaml
@@ -72,7 +72,10 @@
               - rockchip,rk3588-qos
               - rockchip,rv1126-qos
               - starfive,jh7100-sysmain
+              - ti,am62-usb-phy-ctrl
               - ti,am654-dss-oldi-io-ctrl
+              - ti,am654-serdes-ctrl
+              - ti,j784s4-pcie-ctrl
 
           - const: syscon
 
diff --git a/Bindings/mfd/ti,twl.yaml b/Bindings/mfd/ti,twl.yaml
index c04d57b..52ed228 100644
--- a/Bindings/mfd/ti,twl.yaml
+++ b/Bindings/mfd/ti,twl.yaml
@@ -34,6 +34,8 @@
 
   interrupt-controller: true
 
+  system-power-controller: true
+
   "#interrupt-cells":
     const: 1
 
diff --git a/Bindings/mips/cpus.yaml b/Bindings/mips/cpus.yaml
index cf382de..a85137a 100644
--- a/Bindings/mips/cpus.yaml
+++ b/Bindings/mips/cpus.yaml
@@ -23,22 +23,23 @@
       - brcm,bmips4380
       - brcm,bmips5000
       - brcm,bmips5200
-      - ingenic,xburst-mxu1.0
+      - img,i6500
       - ingenic,xburst-fpu1.0-mxu1.1
       - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst-mxu1.0
       - ingenic,xburst2-fpu2.1-mxu2.1-smt
       - loongson,gs264
       - mips,m14Kc
-      - mips,mips4Kc
-      - mips,mips4KEc
-      - mips,mips24Kc
-      - mips,mips24KEc
-      - mips,mips74Kc
       - mips,mips1004Kc
+      - mips,mips24KEc
+      - mips,mips24Kc
+      - mips,mips4KEc
+      - mips,mips4Kc
+      - mips,mips74Kc
       - mti,interaptiv
-      - mti,mips24KEc
       - mti,mips14KEc
       - mti,mips14Kc
+      - mti,mips24KEc
 
   reg:
     maxItems: 1
diff --git a/Bindings/mips/mobileye.yaml b/Bindings/mips/mobileye.yaml
new file mode 100644
index 0000000..831975f
--- /dev/null
+++ b/Bindings/mips/mobileye.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright 2023 Mobileye Vision Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/mobileye.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye SoC series
+
+maintainers:
+  - Vladimir Kondratiev <vladimir.kondratiev@intel.com>
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+
+description:
+  Boards with a Mobileye SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    oneOf:
+      - description: Boards with Mobileye EyeQ5 SoC
+        items:
+          - enum:
+              - mobileye,eyeq5-epm5
+          - const: mobileye,eyeq5
+
+additionalProperties: true
+
+...
diff --git a/Bindings/misc/qcom,fastrpc.yaml b/Bindings/misc/qcom,fastrpc.yaml
index 2dc3e24..c27a8f3 100644
--- a/Bindings/misc/qcom,fastrpc.yaml
+++ b/Bindings/misc/qcom,fastrpc.yaml
@@ -77,6 +77,8 @@
       reg:
         maxItems: 1
 
+      dma-coherent: true
+
       iommus:
         minItems: 1
         maxItems: 3
diff --git a/Bindings/misc/xlnx,sd-fec.txt b/Bindings/misc/xlnx,sd-fec.txt
deleted file mode 100644
index e328963..0000000
--- a/Bindings/misc/xlnx,sd-fec.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Xilinx SDFEC(16nm) IP *
-
-The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
-which provides high-throughput LDPC and Turbo Code implementations.
-The LDPC decode & encode functionality is capable of covering a range of
-customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
-principally covers codes used by LTE. The FEC Engine offers significant
-power and area savings versus implementations done in the FPGA fabric.
-
-
-Required properties:
-- compatible: Must be "xlnx,sd-fec-1.1"
-- clock-names : List of input clock names from the following:
-    - "core_clk", Main processing clock for processing core (required)
-    - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
-    - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
-    - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
-    - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
-    - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
-    - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
-    - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
-- clocks : Clock phandles (see clock_bindings.txt for details).
-- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
-  location and length.
-- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
-  being used.
-- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DIN_WORDS to be block based, while a value of 2 configures the
-  DIN_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DOUT_WORDS to be block based, while a value of 2 configures the
-  DOUT_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-Optional properties:
-- interrupts: should contain SDFEC interrupt number
-
-Example
----------------------------------------
-	sd_fec_0: sd-fec@a0040000 {
-		compatible = "xlnx,sd-fec-1.1";
-		clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
-		clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
-		reg = <0x0 0xa0040000 0x0 0x40000>;
-		interrupt-parent = <&axi_intc>;
-		interrupts = <1 0>;
-		xlnx,sdfec-code = "ldpc";
-		xlnx,sdfec-din-words = <0>;
-		xlnx,sdfec-din-width = <2>;
-		xlnx,sdfec-dout-words = <0>;
-		xlnx,sdfec-dout-width = <1>;
-	};
diff --git a/Bindings/misc/xlnx,sd-fec.yaml b/Bindings/misc/xlnx,sd-fec.yaml
new file mode 100644
index 0000000..9bd2103
--- /dev/null
+++ b/Bindings/misc/xlnx,sd-fec.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SDFEC(16nm) IP
+
+maintainers:
+  - Cvetic, Dragan <dragan.cvetic@amd.com>
+  - Erim, Salih <salih.erim@amd.com>
+
+description:
+  The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+  which provides high-throughput LDPC and Turbo Code implementations.
+  The LDPC decode & encode functionality is capable of covering a range of
+  customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+  principally covers codes used by LTE. The FEC Engine offers significant
+  power and area savings versus implementations done in the FPGA fabric.
+
+properties:
+  compatible:
+    const: xlnx,sd-fec-1.1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 8
+    additionalItems: true
+    items:
+      - description: Main processing clock for processing core
+      - description: AXI4-Lite memory-mapped slave interface clock
+      - description: Control input AXI4-Stream Slave interface clock
+      - description: DIN AXI4-Stream Slave interface clock
+      - description: Status output AXI4-Stream Master interface clock
+      - description: DOUT AXI4-Stream Master interface clock
+      - description: DIN_WORDS AXI4-Stream Slave interface clock
+      - description: DOUT_WORDS AXI4-Stream Master interface clock
+
+  clock-names:
+    allOf:
+      - minItems: 2
+        maxItems: 8
+        additionalItems: true
+        items:
+          - const: core_clk
+          - const: s_axi_aclk
+      - items:
+          enum:
+            - core_clk
+            - s_axi_aclk
+            - s_axis_ctrl_aclk
+            - s_axis_din_aclk
+            - m_axis_status_aclk
+            - m_axis_dout_aclk
+            - s_axis_din_words_aclk
+            - m_axis_dout_words_aclk
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,sdfec-code:
+    description:
+      The SD-FEC integrated block supports Low Density Parity Check (LDPC)
+      decoding and encoding and Turbo code decoding. The LDPC codes used are
+      highly configurable, and the specific code used can be specified on
+      a codeword-by-codeword basis. The Turbo code decoding is required by LTE
+      standard.
+    $ref: /schemas/types.yaml#/definitions/string
+    items:
+      enum: [ ldpc, turbo ]
+
+  xlnx,sdfec-din-width:
+    description:
+      Configures the DIN AXI stream where a value of 1
+      configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+      of "4x128b".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  xlnx,sdfec-din-words:
+    description:
+      A value 0 indicates that the DIN_WORDS interface is
+      driven with a fixed value and is not present on the device, a value of 1
+      configures the DIN_WORDS to be block based, while a value of 2 configures the
+      DIN_WORDS input to be supplied for each AXI transaction.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+  xlnx,sdfec-dout-width:
+    description:
+      Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b",
+      2 a width of "2x128b" and 4 configures a width of "4x128b".
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 4 ]
+
+  xlnx,sdfec-dout-words:
+    description:
+      A value 0 indicates that the DOUT_WORDS interface is
+      driven with a fixed value and is not present on the device, a value of 1
+      configures the DOUT_WORDS to be block based, while a value of 2 configures the
+      DOUT_WORDS input to be supplied for each AXI transaction.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - xlnx,sdfec-code
+  - xlnx,sdfec-din-width
+  - xlnx,sdfec-din-words
+  - xlnx,sdfec-dout-width
+  - xlnx,sdfec-dout-words
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    sd-fec@a0040000 {
+        compatible = "xlnx,sd-fec-1.1";
+        reg = <0xa0040000 0x40000>;
+        clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>,
+                 <&misc_clk_1>, <&misc_clk_1>;
+        clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk",
+                      "s_axis_din_aclk", "m_axis_status_aclk",
+                      "m_axis_dout_aclk";
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,sdfec-code = "ldpc";
+        xlnx,sdfec-din-width = <2>;
+        xlnx,sdfec-din-words = <0>;
+        xlnx,sdfec-dout-width = <1>;
+        xlnx,sdfec-dout-words = <0>;
+    };
+
diff --git a/Bindings/mmc/fsl-imx-esdhc.yaml b/Bindings/mmc/fsl-imx-esdhc.yaml
index 82eb7a2..82f7ee8 100644
--- a/Bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Bindings/mmc/fsl-imx-esdhc.yaml
@@ -55,8 +55,9 @@
           - enum:
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
-              - fsl,imx93-usdhc
               - fsl,imx8ulp-usdhc
+              - fsl,imx93-usdhc
+              - fsl,imx95-usdhc
           - const: fsl,imx8mm-usdhc
       - items:
           - enum:
@@ -162,6 +163,9 @@
       - const: ahb
       - const: per
 
+  iommus:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
@@ -173,6 +177,11 @@
           - const: state_100mhz
           - const: state_200mhz
           - const: sleep
+      - minItems: 2
+        items:
+          - const: default
+          - const: state_100mhz
+          - const: sleep
       - minItems: 1
         items:
           - const: default
diff --git a/Bindings/mmc/fsl-imx-mmc.yaml b/Bindings/mmc/fsl-imx-mmc.yaml
index 221f5bc..7911316 100644
--- a/Bindings/mmc/fsl-imx-mmc.yaml
+++ b/Bindings/mmc/fsl-imx-mmc.yaml
@@ -24,6 +24,14 @@
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
   interrupts:
     maxItems: 1
 
@@ -34,6 +42,8 @@
     const: rx-tx
 
 required:
+  - clocks
+  - clock-names
   - compatible
   - reg
   - interrupts
@@ -46,6 +56,8 @@
         compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
         reg = <0x10014000 0x1000>;
         interrupts = <11>;
+        clocks = <&clks 29>, <&clks 60>;
+        clock-names = "ipg", "per";
         dmas = <&dma 7>;
         dma-names = "rx-tx";
         bus-width = <4>;
diff --git a/Bindings/mmc/hi3798cv200-dw-mshc.txt b/Bindings/mmc/hi3798cv200-dw-mshc.txt
deleted file mode 100644
index a0693b7..0000000
--- a/Bindings/mmc/hi3798cv200-dw-mshc.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-Read synopsys-dw-mshc.txt for more details
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200
-specific extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc".
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-  in clock-names.
-- clock-names: Should contain the following:
-	"ciu" - The ciu clock described in synopsys-dw-mshc.txt.
-	"biu" - The biu clock described in synopsys-dw-mshc.txt.
-	"ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling.
-	"ciu-drive"  - Hi3798CV200 extended phase clock for ciu driving.
-
-Example:
-
-	emmc: mmc@9830000 {
-		compatible = "hisilicon,hi3798cv200-dw-mshc";
-		reg = <0x9830000 0x10000>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&crg HISTB_MMC_CIU_CLK>,
-			 <&crg HISTB_MMC_BIU_CLK>,
-			 <&crg HISTB_MMC_SAMPLE_CLK>,
-			 <&crg HISTB_MMC_DRV_CLK>;
-		clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
-		fifo-depth = <256>;
-		clock-frequency = <200000000>;
-		cap-mmc-highspeed;
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		non-removable;
-		bus-width = <8>;
-	};
diff --git a/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml b/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml
new file mode 100644
index 0000000..41c9b22
--- /dev/null
+++ b/Bindings/mmc/hisilicon,hi3798cv200-dw-mshc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/hisilicon,hi3798cv200-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon HiSTB SoCs specific extensions to the Synopsys DWMMC controller
+
+maintainers:
+  - Yang Xiwen <forbidden405@outlook.com>
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hi3798cv200-dw-mshc
+      - hisilicon,hi3798mv200-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: bus interface unit clock
+      - description: card interface unit clock
+      - description: card input sample phase clock
+      - description: controller output drive phase clock
+
+  clock-names:
+    items:
+      - const: ciu
+      - const: biu
+      - const: ciu-sample
+      - const: ciu-drive
+
+  hisilicon,sap-dll-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      DWMMC core on Hi3798MV2x SoCs has a delay-locked-loop(DLL) attached to card data input path.
+      It is integrated into CRG core on the SoC and has to be controlled during tuning.
+    items:
+      - description: A phandle pointed to the CRG syscon node
+      - description: Sample DLL register offset in CRG address space
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: hisilicon,hi3798mv200-dw-mshc
+    then:
+      required:
+        - hisilicon,sap-dll-reg
+    else:
+      properties:
+        hisilicon,sap-dll-reg: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/histb-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@9830000 {
+        compatible = "hisilicon,hi3798cv200-dw-mshc";
+        reg = <0x9830000 0x10000>;
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg HISTB_MMC_CIU_CLK>,
+                 <&crg HISTB_MMC_BIU_CLK>,
+                 <&crg HISTB_MMC_SAMPLE_CLK>,
+                 <&crg HISTB_MMC_DRV_CLK>;
+        clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+        resets = <&crg 0xa0 4>;
+        reset-names = "reset";
+        pinctrl-names = "default";
+        pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+                     &emmc_pins_3 &emmc_pins_4>;
+        fifo-depth = <256>;
+        clock-frequency = <200000000>;
+        cap-mmc-highspeed;
+        mmc-ddr-1_8v;
+        mmc-hs200-1_8v;
+        non-removable;
+        bus-width = <8>;
+    };
diff --git a/Bindings/mmc/renesas,sdhi.yaml b/Bindings/mmc/renesas,sdhi.yaml
index f7a4c6b..29f2400 100644
--- a/Bindings/mmc/renesas,sdhi.yaml
+++ b/Bindings/mmc/renesas,sdhi.yaml
@@ -67,6 +67,7 @@
               - renesas,sdhi-r8a779a0  # R-Car V3U
               - renesas,sdhi-r8a779f0  # R-Car S4-8
               - renesas,sdhi-r8a779g0  # R-Car V4H
+              - renesas,sdhi-r8a779h0  # R-Car V4M
           - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
diff --git a/Bindings/mmc/snps,dwcmshc-sdhci.yaml b/Bindings/mmc/snps,dwcmshc-sdhci.yaml
index 42804d9..4d3031d 100644
--- a/Bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -19,6 +19,8 @@
       - rockchip,rk3568-dwcmshc
       - rockchip,rk3588-dwcmshc
       - snps,dwcmshc-sdhci
+      - sophgo,cv1800b-dwcmshc
+      - sophgo,sg2002-dwcmshc
       - thead,th1520-dwcmshc
 
   reg:
diff --git a/Bindings/mtd/atmel-nand.txt b/Bindings/mtd/atmel-nand.txt
index 5064582..4598930 100644
--- a/Bindings/mtd/atmel-nand.txt
+++ b/Bindings/mtd/atmel-nand.txt
@@ -56,6 +56,7 @@
 	"atmel,sama5d4-pmecc"
 	"atmel,sama5d2-pmecc"
 	"microchip,sam9x60-pmecc"
+	"microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc"
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
        block, and the second one to the PMECC_ERRLOC block.
 
diff --git a/Bindings/mtd/brcm,brcmnand.yaml b/Bindings/mtd/brcm,brcmnand.yaml
index f57e963..064e840 100644
--- a/Bindings/mtd/brcm,brcmnand.yaml
+++ b/Bindings/mtd/brcm,brcmnand.yaml
@@ -9,6 +9,7 @@
 maintainers:
   - Brian Norris <computersforpeace@gmail.com>
   - Kamal Dasu <kdasu.kdev@gmail.com>
+  - William Zhang <william.zhang@broadcom.com>
 
 description: |
   The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
@@ -18,9 +19,10 @@
   supports basic PROGRAM and READ functions, among other features.
 
   This controller was originally designed for STB SoCs (BCM7xxx) but is now
-  available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
-  iProc/Cygnus. Its history includes several similar (but not fully register
-  compatible) versions.
+  available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based
+  Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus.
+  Its history includes several similar (but not fully register compatible)
+  versions.
 
   -- Additional SoC-specific NAND controller properties --
 
@@ -53,7 +55,7 @@
               - brcm,brcmnand-v7.2
               - brcm,brcmnand-v7.3
           - const: brcm,brcmnand
-      - description: BCM63138 SoC-specific NAND controller
+      - description: BCMBCA SoC-specific NAND controller
         items:
           - const: brcm,nand-bcm63138
           - enum:
@@ -111,6 +113,13 @@
       earlier versions of this core that include WP
     type: boolean
 
+  brcm,wp-not-connected:
+    description:
+      Use this property when WP pin is not physically wired to the NAND chip.
+      Write protection feature cannot be used. By default, controller assumes
+      the pin is connected and feature is used.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -137,6 +146,15 @@
           layout.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      brcm,nand-ecc-use-strap:
+        description:
+          This property requires the host system to get the ECC related
+          settings from the SoC NAND boot strap configuration instead of
+          the generic NAND ECC settings. This is a common hardware design
+          on BCMBCA based boards. This strap ECC option and generic NAND
+          ECC option can not be specified at the same time.
+        $ref: /schemas/types.yaml#/definitions/flag
+
     unevaluatedProperties: false
 
 allOf:
@@ -177,6 +195,8 @@
             - const: iproc-idm
             - const: iproc-ext
   - if:
+      required:
+        - interrupts
       properties:
         interrupts:
           minItems: 2
@@ -184,12 +204,26 @@
       required:
         - interrupt-names
 
+  - if:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          required:
+            - brcm,nand-ecc-use-strap
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength: false
+            nand-ecc-step-size: false
+            nand-ecc-maximize: false
+            nand-ecc-algo: false
+            brcm,nand-oob-sector-size: false
+
 unevaluatedProperties: false
 
 required:
   - reg
   - reg-names
-  - interrupts
 
 examples:
   - |
diff --git a/Bindings/mtd/davinci-nand.txt b/Bindings/mtd/davinci-nand.txt
index edebeae..eb8e2ff 100644
--- a/Bindings/mtd/davinci-nand.txt
+++ b/Bindings/mtd/davinci-nand.txt
@@ -68,7 +68,7 @@
 				false.
 
 Nand device bindings may contain additional sub-nodes describing partitions of
-the address space. See partition.txt for more detail. The NAND Flash timing
+the address space. See mtd.yaml for more detail. The NAND Flash timing
 values must be programmed in the chip select’s node of AEMIF
 memory-controller (see Documentation/devicetree/bindings/memory-controllers/
 davinci-aemif.txt).
diff --git a/Bindings/mtd/flctl-nand.txt b/Bindings/mtd/flctl-nand.txt
index 427f46d..5151839 100644
--- a/Bindings/mtd/flctl-nand.txt
+++ b/Bindings/mtd/flctl-nand.txt
@@ -15,7 +15,7 @@
 completing the bindings.
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/fsl-upm-nand.txt b/Bindings/mtd/fsl-upm-nand.txt
index 25f07c1..530c017 100644
--- a/Bindings/mtd/fsl-upm-nand.txt
+++ b/Bindings/mtd/fsl-upm-nand.txt
@@ -22,7 +22,7 @@
 	(R/B# pins not connected).
 
 Each flash chip described may optionally contain additional sub-nodes
-describing partitions of the address space. See partition.txt for more
+describing partitions of the address space. See mtd.yaml for more
 detail.
 
 Examples:
diff --git a/Bindings/mtd/gpio-control-nand.txt b/Bindings/mtd/gpio-control-nand.txt
index 486a17d..0edf55d 100644
--- a/Bindings/mtd/gpio-control-nand.txt
+++ b/Bindings/mtd/gpio-control-nand.txt
@@ -26,7 +26,7 @@
   read to ensure that the GPIO accesses have completed.
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Examples:
 
diff --git a/Bindings/mtd/gpmi-nand.yaml b/Bindings/mtd/gpmi-nand.yaml
index ba086c3..021c0da 100644
--- a/Bindings/mtd/gpmi-nand.yaml
+++ b/Bindings/mtd/gpmi-nand.yaml
@@ -12,7 +12,7 @@
 description: |
   The GPMI nand controller provides an interface to control the NAND
   flash chips. The device tree may optionally contain sub-nodes
-  describing partitions of the address space. See partition.txt for
+  describing partitions of the address space. See mtd.yaml for
   more detail.
 
 properties:
diff --git a/Bindings/mtd/hisi504-nand.txt b/Bindings/mtd/hisi504-nand.txt
index 8963983..362203e 100644
--- a/Bindings/mtd/hisi504-nand.txt
+++ b/Bindings/mtd/hisi504-nand.txt
@@ -22,7 +22,7 @@
  - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
 
 Flash chip may optionally contain additional sub-nodes describing partitions of
-the address space. See partition.txt for more detail.
+the address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/jedec,spi-nor.yaml b/Bindings/mtd/jedec,spi-nor.yaml
index 58f0cea..6e3afb4 100644
--- a/Bindings/mtd/jedec,spi-nor.yaml
+++ b/Bindings/mtd/jedec,spi-nor.yaml
@@ -52,6 +52,9 @@
     minItems: 1
     maxItems: 2
 
+  interrupts:
+    maxItems: 1
+
   m25p,fast-read:
     type: boolean
     description:
diff --git a/Bindings/mtd/mtd.yaml b/Bindings/mtd/mtd.yaml
index f322290..ee442ec 100644
--- a/Bindings/mtd/mtd.yaml
+++ b/Bindings/mtd/mtd.yaml
@@ -10,6 +10,8 @@
   - Miquel Raynal <miquel.raynal@bootlin.com>
   - Richard Weinberger <richard@nod.at>
 
+select: false
+
 properties:
   $nodename:
     pattern: "^(flash|.*sram|nand)(@.*)?$"
diff --git a/Bindings/mtd/nvidia-tegra20-nand.txt b/Bindings/mtd/nvidia-tegra20-nand.txt
index e737e5b..4a00ec2 100644
--- a/Bindings/mtd/nvidia-tegra20-nand.txt
+++ b/Bindings/mtd/nvidia-tegra20-nand.txt
@@ -39,7 +39,7 @@
 - wp-gpios: GPIO specifier for the write protect pin.
 
 Optional child node of NAND chip nodes:
-Partitions: see partition.txt
+Partitions: see mtd.yaml
 
   Example:
 	nand-controller@70008000 {
diff --git a/Bindings/mtd/orion-nand.txt b/Bindings/mtd/orion-nand.txt
index 2d6ab66..b9997b1 100644
--- a/Bindings/mtd/orion-nand.txt
+++ b/Bindings/mtd/orion-nand.txt
@@ -13,7 +13,7 @@
                registers in usecs
 
 The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
+address space. See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/partitions/linux,ubi.yaml b/Bindings/mtd/partitions/linux,ubi.yaml
new file mode 100644
index 0000000..27e1ac1
--- /dev/null
+++ b/Bindings/mtd/partitions/linux,ubi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unsorted Block Images
+
+description: |
+  UBI ("Unsorted Block Images") is a volume management system for raw
+  flash devices which manages multiple logical volumes on a single
+  physical flash device and spreads the I/O load (i.e wear-leveling)
+  across the whole flash chip.
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    const: linux,ubi
+
+  volumes:
+    type: object
+    description: UBI Volumes
+
+    patternProperties:
+      "^ubi-volume-.*$":
+        $ref: /schemas/mtd/partitions/ubi-volume.yaml#
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x100000>;
+            label = "bootloader";
+            read-only;
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "ubi";
+            compatible = "linux,ubi";
+
+            volumes {
+                ubi-volume-caldata {
+                    volid = <2>;
+                    volname = "rf";
+
+                    nvmem-layout {
+                        compatible = "fixed-layout";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+
+                        eeprom@0 {
+                            reg = <0x0 0x1000>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Bindings/mtd/partitions/ubi-volume.yaml b/Bindings/mtd/partitions/ubi-volume.yaml
new file mode 100644
index 0000000..19736b2
--- /dev/null
+++ b/Bindings/mtd/partitions/ubi-volume.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UBI volume
+
+description: |
+  This binding describes a single UBI volume. Volumes can be matches either
+  by their ID or their name, or both.
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+properties:
+  volid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Match UBI volume ID
+
+  volname:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Match UBI volume ID
+
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
+    description:
+      This container may reference an NVMEM layout parser.
+
+anyOf:
+  - required:
+      - volid
+
+  - required:
+      - volname
+
+# This is a generic file other binding inherit from and extend
+additionalProperties: true
diff --git a/Bindings/mtd/samsung-s3c2410.txt b/Bindings/mtd/samsung-s3c2410.txt
index 09815c4..6354553 100644
--- a/Bindings/mtd/samsung-s3c2410.txt
+++ b/Bindings/mtd/samsung-s3c2410.txt
@@ -19,7 +19,7 @@
 
 Each child device node may optionally contain a 'partitions' sub-node,
 which further contains sub-nodes describing the flash partition mapping.
-See partition.txt for more detail.
+See mtd.yaml for more detail.
 
 Example:
 
diff --git a/Bindings/mtd/st,stm32-fmc2-nand.yaml b/Bindings/mtd/st,stm32-fmc2-nand.yaml
index e72cb5b..b8ef9ba 100644
--- a/Bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -14,10 +14,11 @@
     enum:
       - st,stm32mp15-fmc2
       - st,stm32mp1-fmc2-nfc
+      - st,stm32mp25-fmc2-nfc
 
   reg:
     minItems: 6
-    maxItems: 7
+    maxItems: 12
 
   interrupts:
     maxItems: 1
@@ -92,6 +93,28 @@
             - description: Chip select 1 command
             - description: Chip select 1 address space
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp25-fmc2-nfc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
+            - description: Chip select 2 data
+            - description: Chip select 2 command
+            - description: Chip select 2 address space
+            - description: Chip select 3 data
+            - description: Chip select 3 command
+            - description: Chip select 3 address space
+
 required:
   - compatible
   - reg
diff --git a/Bindings/mux/mux-controller.yaml b/Bindings/mux/mux-controller.yaml
index 8b94308..571ad9e 100644
--- a/Bindings/mux/mux-controller.yaml
+++ b/Bindings/mux/mux-controller.yaml
@@ -74,7 +74,7 @@
 
 properties:
   $nodename:
-    pattern: '^mux-controller(@.*|-[0-9a-f]+)?$'
+    pattern: '^mux-controller(@.*|-([0-9]|[1-9][0-9]+))?$'
 
   '#mux-control-cells':
     enum: [ 0, 1 ]
diff --git a/Bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
index eba2f30..055a335 100644
--- a/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -7,8 +7,8 @@
 title: Qualcomm Bluetooth Chips
 
 maintainers:
-  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
-  - Rocky Liao <rjliao@codeaurora.org>
+  - Balakrishna Godavarthi <quic_bgodavar@quicinc.com>
+  - Rocky Liao <quic_rjliao@quicinc.com>
 
 description:
   This binding describes Qualcomm UART-attached bluetooth chips.
@@ -94,6 +94,10 @@
 
   local-bd-address: true
 
+  qcom,local-bd-address-broken:
+    type: boolean
+    description:
+      boot firmware is incorrectly passing the address in big-endian order
 
 required:
   - compatible
diff --git a/Bindings/net/brcm,asp-v2.0.yaml b/Bindings/net/brcm,asp-v2.0.yaml
index 75d8138..660e2ca 100644
--- a/Bindings/net/brcm,asp-v2.0.yaml
+++ b/Bindings/net/brcm,asp-v2.0.yaml
@@ -17,6 +17,10 @@
     oneOf:
       - items:
           - enum:
+              - brcm,bcm74165b0-asp
+          - const: brcm,asp-v2.2
+      - items:
+          - enum:
               - brcm,bcm74165-asp
           - const: brcm,asp-v2.1
       - items:
diff --git a/Bindings/net/brcm,unimac-mdio.yaml b/Bindings/net/brcm,unimac-mdio.yaml
index 6684810..23dfe08 100644
--- a/Bindings/net/brcm,unimac-mdio.yaml
+++ b/Bindings/net/brcm,unimac-mdio.yaml
@@ -24,6 +24,7 @@
       - brcm,genet-mdio-v5
       - brcm,asp-v2.0-mdio
       - brcm,asp-v2.1-mdio
+      - brcm,asp-v2.2-mdio
       - brcm,unimac-mdio
 
   reg:
diff --git a/Bindings/net/can/fsl,flexcan.yaml b/Bindings/net/can/fsl,flexcan.yaml
index 4162469..f197d9b 100644
--- a/Bindings/net/can/fsl,flexcan.yaml
+++ b/Bindings/net/can/fsl,flexcan.yaml
@@ -39,6 +39,9 @@
               - fsl,imx6sx-flexcan
           - const: fsl,imx6q-flexcan
       - items:
+          - const: fsl,imx95-flexcan
+          - const: fsl,imx93-flexcan
+      - items:
           - enum:
               - fsl,ls1028ar1-flexcan
           - const: fsl,lx2160ar1-flexcan
diff --git a/Bindings/net/can/microchip,mpfs-can.yaml b/Bindings/net/can/microchip,mpfs-can.yaml
index 45aa3de..01e4d4a 100644
--- a/Bindings/net/can/microchip,mpfs-can.yaml
+++ b/Bindings/net/can/microchip,mpfs-can.yaml
@@ -24,7 +24,9 @@
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    items:
+      - description: AHB peripheral clock
+      - description: CAN bus clock
 
 required:
   - compatible
@@ -39,7 +41,7 @@
     can@2010c000 {
         compatible = "microchip,mpfs-can";
         reg = <0x2010c000 0x1000>;
-        clocks = <&clkcfg 17>;
+        clocks = <&clkcfg 17>, <&clkcfg 37>;
         interrupt-parent = <&plic>;
         interrupts = <56>;
     };
diff --git a/Bindings/net/can/tcan4x5x.txt b/Bindings/net/can/tcan4x5x.txt
index 170e23f..20c0572 100644
--- a/Bindings/net/can/tcan4x5x.txt
+++ b/Bindings/net/can/tcan4x5x.txt
@@ -28,6 +28,8 @@
 			      available with tcan4552/4553.
 	- device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not
 			     available with tcan4552/4553.
+	- wakeup-source: Leave the chip running when suspended, and configure
+			 the RX interrupt to wake up the device.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
@@ -42,4 +44,5 @@
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 };
diff --git a/Bindings/net/can/xilinx,can.yaml b/Bindings/net/can/xilinx,can.yaml
index 64d57c3..8d4e5af 100644
--- a/Bindings/net/can/xilinx,can.yaml
+++ b/Bindings/net/can/xilinx,can.yaml
@@ -49,6 +49,10 @@
   resets:
     maxItems: 1
 
+  xlnx,has-ecc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: CAN TX_OL, TX_TL and RX FIFOs have ECC support(AXI CAN)
+
 required:
   - compatible
   - reg
@@ -137,6 +141,7 @@
         interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
         tx-fifo-depth = <0x40>;
         rx-fifo-depth = <0x40>;
+        xlnx,has-ecc;
     };
 
   - |
diff --git a/Bindings/net/cdns,macb.yaml b/Bindings/net/cdns,macb.yaml
index bf8894a..2c71e2c 100644
--- a/Bindings/net/cdns,macb.yaml
+++ b/Bindings/net/cdns,macb.yaml
@@ -59,6 +59,11 @@
           - cdns,gem                  # Generic
           - cdns,macb                 # Generic
 
+      - items:
+          - enum:
+              - microchip,sam9x7-gem     # Microchip SAM9X7 gigabit ethernet interface
+          - const: microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface
+
   reg:
     minItems: 1
     items:
diff --git a/Bindings/net/dsa/ar9331.txt b/Bindings/net/dsa/ar9331.txt
deleted file mode 100644
index f824fda..0000000
--- a/Bindings/net/dsa/ar9331.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Atheros AR9331 built-in switch
-=============================
-
-It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
-MDIO bus. All PHYs are built-in as well.
-
-Required properties:
-
- - compatible: should be: "qca,ar9331-switch"
- - reg: Address on the MII bus for the switch.
- - resets : Must contain an entry for each entry in reset-names.
- - reset-names : Must include the following entries: "switch"
- - interrupt-parent: Phandle to the parent interrupt controller
- - interrupts: IRQ line for the switch
- - interrupt-controller: Indicates the switch is itself an interrupt
-   controller. This is used for the PHY interrupts.
- - #interrupt-cells: must be 1
- - mdio: Container of PHY and devices on the switches MDIO bus.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-Examples:
-
-eth0: ethernet@19000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x19000000 0x200>;
-	interrupts = <4>;
-
-	resets = <&rst 9>, <&rst 22>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "mii";
-	phy-handle = <&phy_port4>;
-};
-
-eth1: ethernet@1a000000 {
-	compatible = "qca,ar9330-eth";
-	reg = <0x1a000000 0x200>;
-	interrupts = <5>;
-	resets = <&rst 13>, <&rst 23>;
-	reset-names = "mac", "mdio";
-	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
-	clock-names = "eth", "mdio";
-
-	phy-mode = "gmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch10: switch@10 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			compatible = "qca,ar9331-switch";
-			reg = <0x10>;
-			resets = <&rst 8>;
-			reset-names = "switch";
-
-			interrupt-parent = <&miscintc>;
-			interrupts = <12>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				switch_port0: port@0 {
-					reg = <0x0>;
-					ethernet = <&eth1>;
-
-					phy-mode = "gmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-
-				switch_port1: port@1 {
-					reg = <0x1>;
-					phy-handle = <&phy_port0>;
-					phy-mode = "internal";
-				};
-
-				switch_port2: port@2 {
-					reg = <0x2>;
-					phy-handle = <&phy_port1>;
-					phy-mode = "internal";
-				};
-
-				switch_port3: port@3 {
-					reg = <0x3>;
-					phy-handle = <&phy_port2>;
-					phy-mode = "internal";
-				};
-
-				switch_port4: port@4 {
-					reg = <0x4>;
-					phy-handle = <&phy_port3>;
-					phy-mode = "internal";
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				interrupt-parent = <&switch10>;
-
-				phy_port0: phy@0 {
-					reg = <0x0>;
-					interrupts = <0>;
-				};
-
-				phy_port1: phy@1 {
-					reg = <0x1>;
-					interrupts = <0>;
-				};
-
-				phy_port2: phy@2 {
-					reg = <0x2>;
-					interrupts = <0>;
-				};
-
-				phy_port3: phy@3 {
-					reg = <0x3>;
-					interrupts = <0>;
-				};
-
-				phy_port4: phy@4 {
-					reg = <0x4>;
-					interrupts = <0>;
-				};
-			};
-		};
-	};
-};
diff --git a/Bindings/net/dsa/microchip,ksz.yaml b/Bindings/net/dsa/microchip,ksz.yaml
index c963dc0..52acc15 100644
--- a/Bindings/net/dsa/microchip,ksz.yaml
+++ b/Bindings/net/dsa/microchip,ksz.yaml
@@ -31,6 +31,7 @@
       - microchip,ksz9893
       - microchip,ksz9563
       - microchip,ksz8563
+      - microchip,ksz8567
 
   reset-gpios:
     description:
diff --git a/Bindings/net/dsa/qca,ar9331.yaml b/Bindings/net/dsa/qca,ar9331.yaml
new file mode 100644
index 0000000..fd9ddc5
--- /dev/null
+++ b/Bindings/net/dsa/qca,ar9331.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca,ar9331.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9331 built-in switch
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description:
+  Qualcomm Atheros AR9331 is a switch built-in to Atheros AR9331 WiSoC and
+  addressable over internal MDIO bus. All PHYs are built-in as well.
+
+properties:
+  compatible:
+    const: qca,ar9331-switch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    properties:
+      interrupt-parent: true
+
+    patternProperties:
+      '(ethernet-)?phy@[0-4]+$':
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          reg: true
+          interrupts:
+            maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: switch
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - mdio
+  - ports
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch10: switch@10 {
+            compatible = "qca,ar9331-switch";
+            reg = <0x10>;
+
+            interrupt-parent = <&miscintc>;
+            interrupts = <12>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            resets = <&rst 8>;
+            reset-names = "switch";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0x0>;
+                    ethernet = <&eth1>;
+
+                    phy-mode = "gmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <0x1>;
+                    phy-handle = <&phy_port0>;
+                    phy-mode = "internal";
+                };
+
+                port@2 {
+                    reg = <0x2>;
+                    phy-handle = <&phy_port1>;
+                    phy-mode = "internal";
+                };
+
+                port@3 {
+                    reg = <0x3>;
+                    phy-handle = <&phy_port2>;
+                    phy-mode = "internal";
+                };
+
+                port@4 {
+                    reg = <0x4>;
+                    phy-handle = <&phy_port3>;
+                    phy-mode = "internal";
+                };
+            };
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                interrupt-parent = <&switch10>;
+
+                phy_port0: ethernet-phy@0 {
+                    reg = <0x0>;
+                    interrupts = <0>;
+                };
+
+                phy_port1: ethernet-phy@1 {
+                    reg = <0x1>;
+                    interrupts = <0>;
+                };
+
+                phy_port2: ethernet-phy@2 {
+                    reg = <0x2>;
+                    interrupts = <0>;
+                };
+
+                phy_port3: ethernet-phy@3 {
+                    reg = <0x3>;
+                    interrupts = <0>;
+                };
+
+                phy_port4: ethernet-phy@4 {
+                    reg = <0x4>;
+                    interrupts = <0>;
+                };
+            };
+        };
+    };
diff --git a/Bindings/net/dsa/realtek.yaml b/Bindings/net/dsa/realtek.yaml
index cce692f..70b6bda 100644
--- a/Bindings/net/dsa/realtek.yaml
+++ b/Bindings/net/dsa/realtek.yaml
@@ -59,6 +59,9 @@
     description: GPIO to be used to reset the whole device
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   realtek,disable-leds:
     type: boolean
     description: |
@@ -127,7 +130,6 @@
     - mdc-gpios
     - mdio-gpios
     - mdio
-    - reset-gpios
 
 required:
   - compatible
diff --git a/Bindings/net/ethernet-controller.yaml b/Bindings/net/ethernet-controller.yaml
index d14d123..b2785b0 100644
--- a/Bindings/net/ethernet-controller.yaml
+++ b/Bindings/net/ethernet-controller.yaml
@@ -14,7 +14,6 @@
     pattern: "^ethernet(@.*)?$"
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Human readable label on a port of a box.
 
   local-mac-address:
diff --git a/Bindings/net/ethernet-phy-package.yaml b/Bindings/net/ethernet-phy-package.yaml
new file mode 100644
index 0000000..e567101
--- /dev/null
+++ b/Bindings/net/ethernet-phy-package.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Package Common Properties
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  PHY packages are multi-port Ethernet PHY of the same family
+  and each Ethernet PHY is affected by the global configuration
+  of the PHY package.
+
+  Each reg of the PHYs defined in the PHY package node is
+  absolute and describe the real address of the Ethernet PHY on
+  the MDIO bus.
+
+properties:
+  $nodename:
+    pattern: "^ethernet-phy-package@[a-f0-9]+$"
+
+  reg:
+    minimum: 0
+    maximum: 31
+    description:
+      The base ID number for the PHY package.
+      Commonly the ID of the first PHY in the PHY package.
+
+      Some PHY in the PHY package might be not defined but
+      still occupy ID on the device (just not attached to
+      anything) hence the PHY package reg might correspond
+      to a not attached PHY (offset 0).
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  ^ethernet-phy@[a-f0-9]+$:
+    $ref: ethernet-phy.yaml#
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: true
diff --git a/Bindings/net/fsl,fec.yaml b/Bindings/net/fsl,fec.yaml
index 8948a11..5536c06 100644
--- a/Bindings/net/fsl,fec.yaml
+++ b/Bindings/net/fsl,fec.yaml
@@ -224,6 +224,9 @@
       Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms.
       Other delays are invalid.
 
+  iommus:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/net/mediatek,net.yaml b/Bindings/net/mediatek,net.yaml
index e74502a..3202dc7 100644
--- a/Bindings/net/mediatek,net.yaml
+++ b/Bindings/net/mediatek,net.yaml
@@ -337,8 +337,8 @@
           minItems: 4
 
         clocks:
-          minItems: 34
-          maxItems: 34
+          minItems: 24
+          maxItems: 24
 
         clock-names:
           items:
@@ -351,18 +351,6 @@
             - const: ethwarp_wocpu1
             - const: ethwarp_wocpu0
             - const: esw
-            - const: netsys0
-            - const: netsys1
-            - const: sgmii_tx250m
-            - const: sgmii_rx250m
-            - const: sgmii2_tx250m
-            - const: sgmii2_rx250m
-            - const: top_usxgmii0_sel
-            - const: top_usxgmii1_sel
-            - const: top_sgm0_sel
-            - const: top_sgm1_sel
-            - const: top_xfi_phy0_xtal_sel
-            - const: top_xfi_phy1_xtal_sel
             - const: top_eth_gmii_sel
             - const: top_eth_refck_50m_sel
             - const: top_eth_sys_200m_sel
@@ -375,16 +363,10 @@
             - const: top_netsys_sync_250m_sel
             - const: top_netsys_ppefb_250m_sel
             - const: top_netsys_warp_sel
-            - const: wocpu1
-            - const: wocpu0
             - const: xgp1
             - const: xgp2
             - const: xgp3
 
-        mediatek,sgmiisys:
-          minItems: 2
-          maxItems: 2
-
 patternProperties:
   "^mac@[0-1]$":
     type: object
diff --git a/Bindings/net/nfc/ti,trf7970a.yaml b/Bindings/net/nfc/ti,trf7970a.yaml
index 9cc236e..d0332eb 100644
--- a/Bindings/net/nfc/ti,trf7970a.yaml
+++ b/Bindings/net/nfc/ti,trf7970a.yaml
@@ -73,7 +73,7 @@
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Bindings/net/qca,qca808x.yaml b/Bindings/net/qca,qca808x.yaml
new file mode 100644
index 0000000..e255265
--- /dev/null
+++ b/Bindings/net/qca,qca808x.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qca,qca808x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA808X PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  QCA808X PHYs can have up to 3 LEDs attached.
+  All 3 LEDs are disabled by default.
+  2 LEDs have dedicated pins with the 3rd LED having the
+  double function of Interrupt LEDs/GPIO or additional LED.
+
+  By default this special PIN is set to LED function.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id004d.d101
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id004d.d101";
+            reg = <0>;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_WAN;
+                    default-state = "keep";
+                };
+            };
+        };
+    };
diff --git a/Bindings/net/qcom,ethqos.yaml b/Bindings/net/qcom,ethqos.yaml
index 7bdb412..69a337c 100644
--- a/Bindings/net/qcom,ethqos.yaml
+++ b/Bindings/net/qcom,ethqos.yaml
@@ -37,12 +37,14 @@
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - const: eth_lpi
+      - enum: [eth_lpi, sfty]
+      - const: sfty
 
   clocks:
     maxItems: 4
@@ -89,8 +91,9 @@
                <&gcc GCC_ETH_PTP_CLK>,
                <&gcc GCC_ETH_RGMII_CLK>;
       interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-names = "macirq", "eth_lpi";
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi", "sfty";
 
       rx-fifo-depth = <4096>;
       tx-fifo-depth = <4096>;
diff --git a/Bindings/net/qcom,ipa.yaml b/Bindings/net/qcom,ipa.yaml
index c302186..53cae71 100644
--- a/Bindings/net/qcom,ipa.yaml
+++ b/Bindings/net/qcom,ipa.yaml
@@ -159,7 +159,7 @@
       when the AP (not the modem) performs early initialization.
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       If present, name (or relative path) of the file within the
       firmware search path containing the firmware image used when
diff --git a/Bindings/net/qcom,ipq4019-mdio.yaml b/Bindings/net/qcom,ipq4019-mdio.yaml
index 3407e90..0029e19 100644
--- a/Bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Bindings/net/qcom,ipq4019-mdio.yaml
@@ -44,6 +44,21 @@
     items:
       - const: gcc_mdio_ahb_clk
 
+  clock-frequency:
+    description:
+      The MDIO bus clock that must be output by the MDIO bus hardware, if
+      absent, the default hardware values are used.
+
+      MDC rate is feed by an external clock (fixed 100MHz) and is divider
+      internally. The default divider is /256 resulting in the default rate
+      applied of 390KHz.
+
+      To follow 802.3 standard that instruct up to 2.5MHz by default, if
+      this property is not declared and the divider is set to /256, by
+      default 1.5625Mhz is select.
+    enum: [ 390625, 781250, 1562500, 3125000, 6250000, 12500000 ]
+    default: 1562500
+
 required:
   - compatible
   - reg
diff --git a/Bindings/net/qcom,qca807x.yaml b/Bindings/net/qcom,qca807x.yaml
new file mode 100644
index 0000000..7290024
--- /dev/null
+++ b/Bindings/net/qcom,qca807x.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,qca807x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCA807x Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Qualcomm QCA8072/5 Ethernet PHY is PHY package of 2 or 5
+  IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
+  1000BASE-T PHY-s.
+
+  They feature 2 SerDes, one for PSGMII or QSGMII connection with
+  MAC, while second one is SGMII for connection to MAC or fiber.
+
+  Both models have a combo port that supports 1000BASE-X and
+  100BASE-FX fiber.
+
+  Each PHY inside of QCA807x series has 4 digitally controlled
+  output only pins that natively drive LED-s for up to 2 attached
+  LEDs. Some vendor also use these 4 output for GPIO usage without
+  attaching LEDs.
+
+  Note that output pins can be set to drive LEDs OR GPIO, mixed
+  definition are not accepted.
+
+$ref: ethernet-phy-package.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca8072-package
+      - qcom,qca8075-package
+
+  qcom,package-mode:
+    description: |
+      PHY package can be configured in 3 mode following this table:
+
+                    First Serdes mode       Second Serdes mode
+      Option 1      PSGMII for copper       Disabled
+                    ports 0-4
+      Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
+                    ports 0-4
+      Option 3      QSGMII for copper       SGMII for
+                    ports 0-3               copper port 4
+
+      PSGMII mode (option 1 or 2) is configured dynamically based on
+      the presence of a connected SFP device.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - qsgmii
+      - psgmii
+    default: psgmii
+
+  qcom,tx-drive-strength-milliwatt:
+    description: set the TX Amplifier value in mv.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [140, 160, 180, 200, 220,
+           240, 260, 280, 300, 320,
+           400, 500, 600]
+    default: 600
+
+patternProperties:
+  ^ethernet-phy@[a-f0-9]+$:
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      qcom,dac-full-amplitude:
+        description:
+          Set Analog MDI driver amplitude to FULL.
+
+          With this not defined, amplitude is set to DSP.
+          (amplitude is adjusted based on cable length)
+
+          With this enabled and qcom,dac-full-bias-current
+          and qcom,dac-disable-bias-current-tweak disabled,
+          bias current is half.
+        type: boolean
+
+      qcom,dac-full-bias-current:
+        description:
+          Set Analog MDI driver bias current to FULL.
+
+          With this not defined, bias current is set to DSP.
+          (bias current is adjusted based on cable length)
+
+          Actual bias current might be different with
+          qcom,dac-disable-bias-current-tweak disabled.
+        type: boolean
+
+      qcom,dac-disable-bias-current-tweak:
+        description: |
+          Set Analog MDI driver bias current to disable tweak
+          to bias current.
+
+          With this not defined, bias current tweak are enabled
+          by default.
+
+          With this enabled the following tweak are NOT applied:
+          - With both FULL amplitude and FULL bias current: bias current
+            is set to half.
+          - With only DSP amplitude: bias current is set to half and
+            is set to 1/4 with cable < 10m.
+          - With DSP bias current (included both DSP amplitude and
+            DSP bias current): bias current is half the detected current
+            with cable < 10m.
+        type: boolean
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+    if:
+      required:
+        - gpio-controller
+    then:
+      properties:
+        leds: false
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy-package@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "qcom,qca8075-package";
+            reg = <0>;
+
+            qcom,package-mode = "qsgmii";
+
+            ethernet-phy@0 {
+                reg = <0>;
+
+                leds {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_GREEN>;
+                        function = LED_FUNCTION_LAN;
+                        default-state = "keep";
+                    };
+                };
+            };
+
+            ethernet-phy@1 {
+                reg = <1>;
+            };
+
+            ethernet-phy@2 {
+                reg = <2>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            ethernet-phy@3 {
+                reg = <3>;
+            };
+
+            ethernet-phy@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Bindings/net/renesas,etheravb.yaml b/Bindings/net/renesas,etheravb.yaml
index 890f785..de7ba7f 100644
--- a/Bindings/net/renesas,etheravb.yaml
+++ b/Bindings/net/renesas,etheravb.yaml
@@ -46,6 +46,7 @@
           - enum:
               - renesas,etheravb-r8a779a0     # R-Car V3U
               - renesas,etheravb-r8a779g0     # R-Car V4H
+              - renesas,etheravb-r8a779h0     # R-Car V4M
           - const: renesas,etheravb-rcar-gen4 # R-Car Gen4
 
       - items:
diff --git a/Bindings/net/snps,dwmac.yaml b/Bindings/net/snps,dwmac.yaml
index 5c2769d..6b0341a 100644
--- a/Bindings/net/snps,dwmac.yaml
+++ b/Bindings/net/snps,dwmac.yaml
@@ -95,6 +95,7 @@
         - snps,dwmac-5.20
         - snps,dwxgmac
         - snps,dwxgmac-2.10
+        - starfive,jh7100-dwmac
         - starfive,jh7110-dwmac
 
   reg:
@@ -107,13 +108,15 @@
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - enum: [eth_wake_irq, eth_lpi]
-      - const: eth_lpi
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
+      - enum: [eth_wake_irq, eth_lpi, sfty]
 
   clocks:
     minItems: 1
@@ -144,10 +147,12 @@
       - description: AHB reset
 
   reset-names:
-    minItems: 1
-    items:
-      - const: stmmaceth
-      - const: ahb
+    oneOf:
+      - items:
+          - enum: [stmmaceth, ahb]
+      - items:
+          - const: stmmaceth
+          - const: ahb
 
   power-domains:
     maxItems: 1
diff --git a/Bindings/net/starfive,jh7110-dwmac.yaml b/Bindings/net/starfive,jh7110-dwmac.yaml
index 5e7cfbb..0d19629 100644
--- a/Bindings/net/starfive,jh7110-dwmac.yaml
+++ b/Bindings/net/starfive,jh7110-dwmac.yaml
@@ -16,16 +16,20 @@
     compatible:
       contains:
         enum:
+          - starfive,jh7100-dwmac
           - starfive,jh7110-dwmac
   required:
     - compatible
 
 properties:
   compatible:
-    items:
-      - enum:
-          - starfive,jh7110-dwmac
-      - const: snps,dwmac-5.20
+    oneOf:
+      - items:
+          - const: starfive,jh7100-dwmac
+          - const: snps,dwmac
+      - items:
+          - const: starfive,jh7110-dwmac
+          - const: snps,dwmac-5.20
 
   reg:
     maxItems: 1
@@ -46,24 +50,6 @@
       - const: tx
       - const: gtx
 
-  interrupts:
-    minItems: 3
-    maxItems: 3
-
-  interrupt-names:
-    minItems: 3
-    maxItems: 3
-
-  resets:
-    items:
-      - description: MAC Reset signal.
-      - description: AHB Reset signal.
-
-  reset-names:
-    items:
-      - const: stmmaceth
-      - const: ahb
-
   starfive,tx-use-rgmii-clk:
     description:
       Tx clock is provided by external rgmii clock.
@@ -94,6 +80,48 @@
 allOf:
   - $ref: snps,dwmac.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7100-dwmac
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          const: ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: starfive,jh7110-dwmac
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
+
+        resets:
+          minItems: 2
+
+        reset-names:
+          minItems: 2
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/net/ti,cpsw-switch.yaml b/Bindings/net/ti,cpsw-switch.yaml
index f07ae31..d5bd93e 100644
--- a/Bindings/net/ti,cpsw-switch.yaml
+++ b/Bindings/net/ti,cpsw-switch.yaml
@@ -7,8 +7,9 @@
 title: TI SoC Ethernet Switch Controller (CPSW)
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description:
   The 3-port switch gigabit ethernet subsystem provides ethernet packet
diff --git a/Bindings/net/ti,dp83822.yaml b/Bindings/net/ti,dp83822.yaml
index db74474..784866e 100644
--- a/Bindings/net/ti,dp83822.yaml
+++ b/Bindings/net/ti,dp83822.yaml
@@ -62,6 +62,40 @@
        for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
        to transmit data.
 
+  ti,cfg-dac-minus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level -1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,cfg-dac-plus-one-bp:
+    description: |
+       DP83826 PHY only.
+       Sets the voltage ratio (with respect to the nominal value)
+       of the logical level +1 for the MLT-3 encoded TX data.
+    enum: [5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
+           10625, 11250, 11875, 12500, 13125, 13750, 14375, 15000]
+    default: 10000
+
+  ti,rmii-mode:
+    description: |
+       If present, select the RMII operation mode. Two modes are
+       available:
+         - RMII master, where the PHY outputs a 50MHz reference clock which can
+         be connected to the MAC.
+         - RMII slave, where the PHY expects a 50MHz reference clock input
+         shared with the MAC.
+       The RMII operation mode can also be configured by its straps.
+       If the strap pin is not set correctly or not set at all, then this can be
+       used to configure it.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - master
+      - slave
+
 required:
   - reg
 
diff --git a/Bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
index c9c2513..73ed595 100644
--- a/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -7,8 +7,9 @@
 title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller)
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description:
   The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports
diff --git a/Bindings/net/ti,k3-am654-cpts.yaml b/Bindings/net/ti,k3-am654-cpts.yaml
index 3e910d3..b1c8753 100644
--- a/Bindings/net/ti,k3-am654-cpts.yaml
+++ b/Bindings/net/ti,k3-am654-cpts.yaml
@@ -7,8 +7,9 @@
 title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
 
 maintainers:
-  - Grygorii Strashko <grygorii.strashko@ti.com>
-  - Sekhar Nori <nsekhar@ti.com>
+  - Siddharth Vadapalli <s-vadapalli@ti.com>
+  - Ravi Gunasekaran <r-gunasekaran@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 description: |+
   The TI AM654x/J721E CPTS module is used to facilitate host control of time
diff --git a/Bindings/net/wireless/mediatek,mt76.yaml b/Bindings/net/wireless/mediatek,mt76.yaml
index 252207a..eabceb8 100644
--- a/Bindings/net/wireless/mediatek,mt76.yaml
+++ b/Bindings/net/wireless/mediatek,mt76.yaml
@@ -19,9 +19,6 @@
   Alternatively, it can specify the wireless part of the MT7628/MT7688
   or MT7622/MT7986 SoC.
 
-allOf:
-  - $ref: ieee80211.yaml#
-
 properties:
   compatible:
     enum:
@@ -38,7 +35,12 @@
       MT7986 should contain 3 regions consys, dcm, and sku, in this order.
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: major interrupt for rings
+      - description: additional interrupt for ring 19
+      - description: additional interrupt for ring 4
+      - description: additional interrupt for ring 5
 
   power-domains:
     maxItems: 1
@@ -217,6 +219,24 @@
   - compatible
   - reg
 
+allOf:
+  - $ref: ieee80211.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7981-wmac
+              - mediatek,mt7986-wmac
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
@@ -293,7 +313,10 @@
         reg = <0x18000000 0x1000000>,
               <0x10003000 0x1000>,
               <0x11d10000 0x1000>;
-        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&topckgen 50>,
                  <&topckgen 62>;
         clock-names = "mcu", "ap2conn";
diff --git a/Bindings/net/wireless/qcom,ath10k.yaml b/Bindings/net/wireless/qcom,ath10k.yaml
index 7758a55..9b3ef4b 100644
--- a/Bindings/net/wireless/qcom,ath10k.yaml
+++ b/Bindings/net/wireless/qcom,ath10k.yaml
@@ -8,6 +8,7 @@
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description:
   Qualcomm Technologies, Inc. IEEE 802.11ac devices.
diff --git a/Bindings/net/wireless/qcom,ath11k-pci.yaml b/Bindings/net/wireless/qcom,ath11k-pci.yaml
index 817f02a..41d0237 100644
--- a/Bindings/net/wireless/qcom,ath11k-pci.yaml
+++ b/Bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -9,6 +9,7 @@
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description: |
   Qualcomm Technologies IEEE 802.11ax PCIe devices
diff --git a/Bindings/net/wireless/qcom,ath11k.yaml b/Bindings/net/wireless/qcom,ath11k.yaml
index 7d5f982..672282c 100644
--- a/Bindings/net/wireless/qcom,ath11k.yaml
+++ b/Bindings/net/wireless/qcom,ath11k.yaml
@@ -9,6 +9,7 @@
 
 maintainers:
   - Kalle Valo <kvalo@kernel.org>
+  - Jeff Johnson <jjohnson@kernel.org>
 
 description: |
   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
diff --git a/Bindings/nvmem/layouts/fixed-cell.yaml b/Bindings/nvmem/layouts/fixed-cell.yaml
index ac2381e..8b38262 100644
--- a/Bindings/nvmem/layouts/fixed-cell.yaml
+++ b/Bindings/nvmem/layouts/fixed-cell.yaml
@@ -36,20 +36,18 @@
 
 allOf:
   - if:
+      properties:
+        compatible:
+          contains:
+            const: mac-base
       required: [ compatible ]
     then:
-      if:
-        properties:
-          compatible:
-            contains:
-              const: mac-base
-      then:
-        properties:
-          "#nvmem-cell-cells":
-            description: The first argument is a MAC address offset.
-            const: 1
-        required:
-          - "#nvmem-cell-cells"
+      properties:
+        "#nvmem-cell-cells":
+          description: The first argument is a MAC address offset.
+          const: 1
+      required:
+        - "#nvmem-cell-cells"
 
 required:
   - reg
diff --git a/Bindings/nvmem/nvmem-provider.yaml b/Bindings/nvmem/nvmem-provider.yaml
new file mode 100644
index 0000000..4009a9a
--- /dev/null
+++ b/Bindings/nvmem/nvmem-provider.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/nvmem-provider.yaml#
+$schema: http://devicetree.org/meta-schemas/base.yaml#
+
+title: NVMEM (Non Volatile Memory) Provider
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+select: true
+
+properties:
+  '#nvmem-cell-cells':
+    enum: [0, 1]
+
+additionalProperties: true
diff --git a/Bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Bindings/nvmem/xlnx,zynqmp-nvmem.txt
deleted file mode 100644
index 4881561..0000000
--- a/Bindings/nvmem/xlnx,zynqmp-nvmem.txt
+++ /dev/null
@@ -1,46 +0,0 @@
---------------------------------------------------------------------------
-=  Zynq UltraScale+ MPSoC nvmem firmware driver binding =
---------------------------------------------------------------------------
-The nvmem_firmware node provides access to the hardware related data
-like soc revision, IDCODE... etc, By using the firmware interface.
-
-Required properties:
-- compatible: should be "xlnx,zynqmp-nvmem-fw"
-
-= Data cells =
-Are child nodes of silicon id, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
--------
- Example
--------
-firmware {
-	zynqmp_firmware: zynqmp-firmware {
-		compatible = "xlnx,zynqmp-firmware";
-		method = "smc";
-
-		nvmem_firmware {
-			compatible = "xlnx,zynqmp-nvmem-fw";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* Data cells */
-			soc_revision: soc_revision {
-				reg = <0x0 0x4>;
-			};
-		};
-	};
-};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-	pcap {
-		...
-
-		nvmem-cells = <&soc_revision>;
-		nvmem-cell-names = "soc_revision";
-
-		...
-	};
diff --git a/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml b/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml
new file mode 100644
index 0000000..917c40d
--- /dev/null
+++ b/Bindings/nvmem/xlnx,zynqmp-nvmem.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq UltraScale+ MPSoC Non Volatile Memory interface
+
+description: |
+    The ZynqMP MPSoC provides access to the hardware related data
+    like SOC revision, IDCODE and specific purpose efuses.
+
+maintainers:
+  - Kalyani Akula <kalyani.akula@amd.com>
+  - Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-nvmem-fw
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nvmem {
+        compatible = "xlnx,zynqmp-nvmem-fw";
+        nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+        };
+    };
diff --git a/Bindings/opp/opp-v2-base.yaml b/Bindings/opp/opp-v2-base.yaml
index e2f8f7a..b1bb87c 100644
--- a/Bindings/opp/opp-v2-base.yaml
+++ b/Bindings/opp/opp-v2-base.yaml
@@ -57,8 +57,6 @@
           specific binding.
         minItems: 1
         maxItems: 32
-        items:
-          maxItems: 1
 
       opp-microvolt:
         description: |
diff --git a/Bindings/pci/fsl,imx6q-pcie-common.yaml b/Bindings/pci/fsl,imx6q-pcie-common.yaml
index d91b639..a8b34f5 100644
--- a/Bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -150,22 +150,6 @@
             - {}
             - const: pcie_phy
             - const: pcie_aux
-  - if:
-      properties:
-        compatible:
-          not:
-            contains:
-              enum:
-                - fsl,imx6sx-pcie
-                - fsl,imx8mq-pcie
-                - fsl,imx6sx-pcie-ep
-                - fsl,imx8mq-pcie-ep
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          maxItems: 3
 
   - if:
       properties:
@@ -223,6 +207,7 @@
                 - fsl,imx6sx-pcie
                 - fsl,imx6q-pcie
                 - fsl,imx6qp-pcie
+                - fsl,imx95-pcie
                 - fsl,imx6sx-pcie-ep
                 - fsl,imx6q-pcie-ep
                 - fsl,imx6qp-pcie-ep
diff --git a/Bindings/pci/fsl,imx6q-pcie-ep.yaml b/Bindings/pci/fsl,imx6q-pcie-ep.yaml
index ee155ed..a06f75d 100644
--- a/Bindings/pci/fsl,imx6q-pcie-ep.yaml
+++ b/Bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -22,14 +22,7 @@
       - fsl,imx8mm-pcie-ep
       - fsl,imx8mq-pcie-ep
       - fsl,imx8mp-pcie-ep
-
-  reg:
-    minItems: 2
-
-  reg-names:
-    items:
-      - const: dbi
-      - const: addr_space
+      - fsl,imx95-pcie-ep
 
   clocks:
     minItems: 3
@@ -66,7 +59,44 @@
       properties:
         compatible:
           enum:
+            - fsl,imx8mm-pcie-ep
             - fsl,imx8mq-pcie-ep
+            - fsl,imx8mp-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: addr_space
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 6
+          maxItems: 6
+        reg-names:
+          items:
+            - const: dbi
+            - const: atu
+            - const: dbi2
+            - const: app
+            - const: dma
+            - const: addr_space
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-pcie-ep
+            - fsl,imx95-pcie-ep
     then:
       properties:
         clocks:
diff --git a/Bindings/pci/fsl,imx6q-pcie.yaml b/Bindings/pci/fsl,imx6q-pcie.yaml
index 81bbb87..8b8d77b 100644
--- a/Bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Bindings/pci/fsl,imx6q-pcie.yaml
@@ -29,16 +29,7 @@
       - fsl,imx8mq-pcie
       - fsl,imx8mm-pcie
       - fsl,imx8mp-pcie
-
-  reg:
-    items:
-      - description: Data Bus Interface (DBI) registers.
-      - description: PCIe configuration space region.
-
-  reg-names:
-    items:
-      - const: dbi
-      - const: config
+      - fsl,imx95-pcie
 
   clocks:
     minItems: 3
@@ -94,6 +85,43 @@
       properties:
         compatible:
           enum:
+            - fsl,imx6q-pcie
+            - fsl,imx6sx-pcie
+            - fsl,imx6qp-pcie
+            - fsl,imx7d-pcie
+            - fsl,imx8mq-pcie
+            - fsl,imx8mm-pcie
+            - fsl,imx8mp-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          items:
+            - const: dbi
+            - const: config
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi
+            - const: config
+            - const: atu
+            - const: app
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - fsl,imx6sx-pcie
     then:
       properties:
@@ -111,6 +139,7 @@
         compatible:
           enum:
             - fsl,imx8mq-pcie
+            - fsl,imx95-pcie
     then:
       properties:
         clocks:
diff --git a/Bindings/pci/qcom,pcie-common.yaml b/Bindings/pci/qcom,pcie-common.yaml
new file mode 100644
index 0000000..0d1b235
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-common.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI Express Root Complex Common Properties
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  reg:
+    minItems: 4
+    maxItems: 6
+
+  reg-names:
+    minItems: 4
+    maxItems: 6
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  reset-names:
+    minItems: 1
+    maxItems: 12
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - reg
+  - reg-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+additionalProperties: true
diff --git a/Bindings/pci/qcom,pcie-sa8775p.yaml b/Bindings/pci/qcom,pcie-sa8775p.yaml
new file mode 100644
index 0000000..efde49d
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sa8775p.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775p PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sa8775p
+
+  reg:
+    minItems: 6
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 5
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+required:
+  - interconnects
+  - interconnect-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sa8775p";
+            reg = <0x0 0x01c00000 0x0 0x3000>,
+                  <0x0 0x40000000 0x0 0xf20>,
+                  <0x0 0x40000f20 0x0 0xa8>,
+                  <0x0 0x40001000 0x0 0x4000>,
+                  <0x0 0x40100000 0x0 0x100000>,
+                  <0x0 0x01c03000 0x0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0",
+                              "msi1",
+                              "msi2",
+                              "msi3",
+                              "msi4",
+                              "msi5",
+                              "msi6",
+                              "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+            interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+                        <0x100 &pcie_smmu 0x0001 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sc7280.yaml b/Bindings/pci/qcom,pcie-sc7280.yaml
new file mode 100644
index 0000000..634da24
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sc7280.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sc7280
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 13
+    maxItems: 13
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+  vddpe-3v3-supply:
+    description: PCIe endpoint power supply
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c08000 {
+            compatible = "qcom,pcie-sc7280";
+            reg = <0 0x01c08000 0 0x3000>,
+                  <0 0x40000000 0 0xf1d>,
+                  <0 0x40000f20 0 0xa8>,
+                  <0 0x40001000 0 0x1000>,
+                  <0 0x40100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <1>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+                     <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+                     <&pcie1_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_1_AUX_CLK>,
+                     <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+                        <0x100 &apps_smmu 0x1c81 0x1>;
+
+            phys = <&pcie1_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie1_clkreq_n>;
+
+            power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+            resets = <&gcc GCC_PCIE_1_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+            vddpe-3v3-supply = <&pp3300_ssd>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sc8180x.yaml b/Bindings/pci/qcom,pcie-sc8180x.yaml
new file mode 100644
index 0000000..baf1813
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sc8180x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180x PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sc8180x
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ref # REFERENCE clock
+      - const: tbu # PCIe TBU clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/interconnect/qcom,sc8180x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sc8180x";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf",
+                        "dbi",
+                        "elbi",
+                        "atu",
+                        "config";
+            ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_CLKREF_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ref",
+                          "tbu";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0",
+                          "msi1",
+                          "msi2",
+                          "msi3",
+                          "msi4",
+                          "msi5",
+                          "msi6",
+                          "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
+                            <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+                        <0x100 &apps_smmu 0x1d81 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sc8280xp.yaml b/Bindings/pci/qcom,pcie-sc8280xp.yaml
new file mode 100644
index 0000000..25c9f13
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sc8280xp.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sa8540p
+      - qcom,pcie-sc8280xp
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: noc_aggr_4 # NoC aggregate 4 clock
+      - const: noc_aggr_south_sf # NoC aggregate South SF clock
+      - const: cnoc_qx # Configuration NoC QX clock
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+required:
+  - interconnects
+  - interconnect-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c20000 {
+            compatible = "qcom,pcie-sc8280xp";
+            reg = <0x0 0x01c20000 0x0 0x3000>,
+                  <0x0 0x3c000000 0x0 0xf1d>,
+                  <0x0 0x3c000f20 0x0 0xa8>,
+                  <0x0 0x3c001000 0x0 0x1000>,
+                  <0x0 0x3c100000 0x0 0x100000>,
+                  <0x0 0x01c23000 0x0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <2>;
+            num-lanes = <4>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+            assigned-clock-rates = <19200000>;
+            clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+                     <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "noc_aggr_4",
+                          "noc_aggr_south_sf";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+                            <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+            interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            phys = <&pcie2a_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie2a_default>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_2A_GDSC>;
+
+            resets = <&gcc GCC_PCIE_2A_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+            vddpe-3v3-supply = <&vreg_nvme>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8150.yaml b/Bindings/pci/qcom,pcie-sm8150.yaml
new file mode 100644
index 0000000..9d56964
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8150.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8150
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: pipe # PIPE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ref # REFERENCE clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8150";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ref";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+                        <0x100 &apps_smmu 0x1d81 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+            wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8250.yaml b/Bindings/pci/qcom,pcie-sm8250.yaml
new file mode 100644
index 0000000..4d060bc
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8250.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8250
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    # Unfortunately the "optional" ref clock is used in the middle of the list
+    oneOf:
+      - items:
+          - const: pipe # PIPE clock
+          - const: aux # Auxiliary clock
+          - const: cfg # Configuration clock
+          - const: bus_master # Master AXI clock
+          - const: bus_slave # Slave AXI clock
+          - const: slave_q2a # Slave Q2A clock
+          - const: ref # REFERENCE clock
+          - const: tbu # PCIe TBU clock
+          - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - items:
+          - const: pipe # PIPE clock
+          - const: aux # Auxiliary clock
+          - const: cfg # Configuration clock
+          - const: bus_master # Master AXI clock
+          - const: bus_slave # Slave AXI clock
+          - const: slave_q2a # Slave Q2A clock
+          - const: tbu # PCIe TBU clock
+          - const: ddrss_sf_tbu # PCIe SF TBU clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8250";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>,
+                  <0 0x01c03000 0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+            clock-names = "pipe",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8350.yaml b/Bindings/pci/qcom,pcie-sm8350.yaml
new file mode 100644
index 0000000..9eb6e45
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8350.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-sm8350
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 8
+    maxItems: 9
+
+  clock-names:
+    minItems: 8
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: tbu # PCIe TBU clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+      - const: aggre0 # Aggre NoC PCIe0 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+oneOf:
+  - properties:
+      interrupts:
+        maxItems: 1
+      interrupt-names:
+        items:
+          - const: msi
+
+  - properties:
+      interrupts:
+        minItems: 8
+      interrupt-names:
+        items:
+          - const: msi0
+          - const: msi1
+          - const: msi2
+          - const: msi3
+          - const: msi4
+          - const: msi5
+          - const: msi6
+          - const: msi7
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8350";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "tbu",
+                          "ddrss_sf_tbu",
+                          "aggre1",
+                          "aggre0";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8450.yaml b/Bindings/pci/qcom,pcie-sm8450.yaml
new file mode 100644
index 0000000..1496d69
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8450.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 11
+    maxItems: 12
+
+  clock-names:
+    minItems: 11
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8450-pcie0";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            max-link-speed = <2>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+                     <&pcie0_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+            msi-map = <0x0 &gic_its 0x5981 0x1>,
+                      <0x100 &gic_its 0x5980 0x1>;
+            msi-map-mask = <0xff00>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-sm8550.yaml b/Bindings/pci/qcom,pcie-sm8550.yaml
new file mode 100644
index 0000000..24cb386
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-sm8550.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on
+  the Synopsys DesignWare PCIe IP.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,pcie-sm8550
+      - items:
+          - enum:
+              - qcom,pcie-sm8650
+          - const: qcom,pcie-sm8550
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - const: noc_aggr # Aggre NoC PCIe AXI clock
+      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pci # PCIe core reset
+      - const: link_down # PCIe link down reset
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8550";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "noc_aggr";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+                        <0x100 &apps_smmu 0x1401 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie-x1e80100.yaml b/Bindings/pci/qcom,pcie-x1e80100.yaml
new file mode 100644
index 0000000..1074310
--- /dev/null
+++ b/Bindings/pci/qcom,pcie-x1e80100.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
+  the Synopsys DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-x1e80100
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: noc_aggr # Aggre NoC PCIe AXI clock
+      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pci # PCIe core reset
+      - const: link_down # PCIe link down reset
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c08000 {
+            compatible = "qcom,pcie-x1e80100";
+            reg = <0 0x01c08000 0 0x3000>,
+                  <0 0x7c000000 0 0xf1d>,
+                  <0 0x7c000f40 0 0xa8>,
+                  <0 0x7c001000 0 0x1000>,
+                  <0 0x7c100000 0 0x100000>,
+                  <0 0x01c0b000 0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+                     <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+                     <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "noc_aggr",
+                          "cnoc_sf_axi";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+                        <0x100 &apps_smmu 0x1401 0x1>;
+
+            phys = <&pcie4_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+            resets = <&gcc GCC_PCIE_4_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Bindings/pci/qcom,pcie.yaml b/Bindings/pci/qcom,pcie.yaml
index a93ab3b..cf9a691 100644
--- a/Bindings/pci/qcom,pcie.yaml
+++ b/Bindings/pci/qcom,pcie.yaml
@@ -28,23 +28,8 @@
           - qcom,pcie-ipq8074-gen3
           - qcom,pcie-msm8996
           - qcom,pcie-qcs404
-          - qcom,pcie-sa8540p
-          - qcom,pcie-sa8775p
-          - qcom,pcie-sc7280
-          - qcom,pcie-sc8180x
-          - qcom,pcie-sc8280xp
           - qcom,pcie-sdm845
           - qcom,pcie-sdx55
-          - qcom,pcie-sm8150
-          - qcom,pcie-sm8250
-          - qcom,pcie-sm8350
-          - qcom,pcie-sm8450-pcie0
-          - qcom,pcie-sm8450-pcie1
-          - qcom,pcie-sm8550
-      - items:
-          - enum:
-              - qcom,pcie-sm8650
-          - const: qcom,pcie-sm8550
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
@@ -106,9 +91,6 @@
   vdda_refclk-supply:
     description: A phandle to the core analog power supply for IC which generates reference clock
 
-  vddpe-3v3-supply:
-    description: A phandle to the PCIe endpoint power supply
-
   phys:
     maxItems: 1
 
@@ -123,6 +105,9 @@
     description: GPIO controlled connection to PERST# signal
     maxItems: 1
 
+  required-opps:
+    maxItems: 1
+
   wake-gpios:
     description: GPIO controlled connection to WAKE# signal
     maxItems: 1
@@ -143,7 +128,6 @@
       - "#interrupt-cells"
   - required:
       - msi-map
-      - msi-map-mask
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
@@ -217,16 +201,7 @@
         compatible:
           contains:
             enum:
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc7280
-              - qcom,pcie-sc8180x
-              - qcom,pcie-sc8280xp
               - qcom,pcie-sdx55
-              - qcom,pcie-sm8250
-              - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
-              - qcom,pcie-sm8550
     then:
       properties:
         reg:
@@ -456,65 +431,6 @@
         compatible:
           contains:
             enum:
-              - qcom,pcie-sc7280
-    then:
-      properties:
-        clocks:
-          minItems: 13
-          maxItems: 13
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sc8180x
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 8
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ref # REFERENCE clock
-            - const: tbu # PCIe TBU clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,pcie-sdm845
     then:
       oneOf:
@@ -558,229 +474,6 @@
         compatible:
           contains:
             enum:
-              - qcom,pcie-sm8150
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 8
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ref # REFERENCE clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8250
-    then:
-      oneOf:
-          # Unfortunately the "optional" ref clock is used in the middle of the list
-        - properties:
-            clocks:
-              minItems: 9
-              maxItems: 9
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: ref # REFERENCE clock
-                - const: tbu # PCIe TBU clock
-                - const: ddrss_sf_tbu # PCIe SF TBU clock
-        - properties:
-            clocks:
-              minItems: 8
-              maxItems: 8
-            clock-names:
-              items:
-                - const: pipe # PIPE clock
-                - const: aux # Auxiliary clock
-                - const: cfg # Configuration clock
-                - const: bus_master # Master AXI clock
-                - const: bus_slave # Slave AXI clock
-                - const: slave_q2a # Slave Q2A clock
-                - const: tbu # PCIe TBU clock
-                - const: ddrss_sf_tbu # PCIe SF TBU clock
-      properties:
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8350
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 9
-        clock-names:
-          minItems: 8
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: tbu # PCIe TBU clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie0
-    then:
-      properties:
-        clocks:
-          minItems: 12
-          maxItems: 12
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie1
-    then:
-      properties:
-        clocks:
-          minItems: 11
-          maxItems: 11
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8550
-    then:
-      properties:
-        clocks:
-          minItems: 7
-          maxItems: 8
-        clock-names:
-          minItems: 7
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: noc_aggr # Aggre NoC PCIe AXI clock
-            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
-        resets:
-          minItems: 1
-          maxItems: 2
-        reset-names:
-          minItems: 1
-          items:
-            - const: pci # PCIe core reset
-            - const: link_down # PCIe link down reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8540p
-              - qcom,pcie-sc8280xp
-    then:
-      properties:
-        clocks:
-          minItems: 8
-          maxItems: 9
-        clock-names:
-          minItems: 8
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: noc_aggr_4 # NoC aggregate 4 clock
-            - const: noc_aggr_south_sf # NoC aggregate South SF clock
-            - const: cnoc_qx # Configuration NoC QX clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,pcie-sdx55
     then:
       properties:
@@ -803,43 +496,6 @@
             - const: pci # PCIe core reset
 
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8775p
-    then:
-      properties:
-        clocks:
-          minItems: 5
-          maxItems: 5
-        clock-names:
-          items:
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sa8540p
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc8280xp
-    then:
-      required:
-        - interconnects
-        - interconnect-names
-
-  - if:
       not:
         properties:
           compatible:
@@ -874,16 +530,7 @@
           contains:
             enum:
               - qcom,pcie-msm8996
-              - qcom,pcie-sa8775p
-              - qcom,pcie-sc7280
-              - qcom,pcie-sc8180x
               - qcom,pcie-sdm845
-              - qcom,pcie-sm8150
-              - qcom,pcie-sm8250
-              - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
-              - qcom,pcie-sm8550
     then:
       oneOf:
         - properties:
@@ -911,24 +558,6 @@
         compatible:
           contains:
             enum:
-              - qcom,pcie-sc8280xp
-    then:
-      properties:
-        interrupts:
-          minItems: 4
-          maxItems: 4
-        interrupt-names:
-          items:
-            - const: msi0
-            - const: msi1
-            - const: msi2
-            - const: msi3
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,pcie-apq8064
               - qcom,pcie-apq8084
               - qcom,pcie-ipq4019
@@ -938,7 +567,6 @@
               - qcom,pcie-ipq8074
               - qcom,pcie-ipq8074-gen3
               - qcom,pcie-qcs404
-              - qcom,pcie-sa8540p
     then:
       properties:
         interrupts:
diff --git a/Bindings/perf/arm,coresight-pmu.yaml b/Bindings/perf/arm,coresight-pmu.yaml
new file mode 100644
index 0000000..985b629
--- /dev/null
+++ b/Bindings/perf/arm,coresight-pmu.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,coresight-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Performance Monitoring Unit Architecture
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    const: arm,coresight-pmu
+
+  reg:
+    items:
+      - description: Register page 0
+      - description: Register page 1, if the PMU implements the dual-page extension
+    minItems: 1
+
+  interrupts:
+    items:
+      - description: Overflow interrupt
+
+  cpus:
+    description: If the PMU is associated with a particular CPU or subset of CPUs,
+      array of phandles to the appropriate CPU node(s)
+
+  reg-io-width:
+    description: Granularity at which PMU register accesses are single-copy atomic
+    default: 4
+    enum: [4, 8]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git a/Bindings/perf/starfive,jh8100-starlink-pmu.yaml b/Bindings/perf/starfive,jh8100-starlink-pmu.yaml
new file mode 100644
index 0000000..915c6b8
--- /dev/null
+++ b/Bindings/perf/starfive,jh8100-starlink-pmu.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/starfive,jh8100-starlink-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH8100 StarLink PMU
+
+maintainers:
+  - Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
+
+description:
+  StarFive's JH8100 StarLink PMU integrates one or more CPU cores with a
+  shared L3 memory system. The PMU support overflow interrupt, up to
+  16 programmable 64bit event counters, and an independent 64bit cycle
+  counter. StarFive's JH8100 StarLink PMU is accessed via MMIO.
+
+properties:
+  compatible:
+    const: starfive,jh8100-starlink-pmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmu@12900000 {
+            compatible = "starfive,jh8100-starlink-pmu";
+            reg = <0x0 0x12900000 0x0 0x10000>;
+            interrupts = <34>;
+        };
+    };
diff --git a/Bindings/phy/mediatek,mt8365-csi-rx.yaml b/Bindings/phy/mediatek,mt8365-csi-rx.yaml
new file mode 100644
index 0000000..2127a57
--- /dev/null
+++ b/Bindings/phy/mediatek,mt8365-csi-rx.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Sensor Interface MIPI CSI CD-PHY
+
+maintainers:
+  - Julien Stephan <jstephan@baylibre.com>
+  - Andy Hsieh <andy.hsieh@mediatek.com>
+
+description:
+  The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
+  receivers. The number of PHYs depends on the SoC model.
+  Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
+  capable.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8365-csi-rx
+
+  reg:
+    maxItems: 1
+
+  num-lanes:
+    enum: [2, 3, 4]
+
+  '#phy-cells':
+    enum: [0, 1]
+    description: |
+      If the PHY doesn't support mode selection then #phy-cells must be 0 and
+      PHY mode is described using phy-type property.
+      If the PHY supports mode selection, then #phy-cells must be 1 and mode
+      is set in the PHY cells. Supported modes are:
+        - PHY_TYPE_DPHY
+        - PHY_TYPE_CPHY
+      See include/dt-bindings/phy/phy.h for constants.
+
+  phy-type:
+    description:
+      If the PHY doesn't support mode selection then this set the operating mode.
+      See include/dt-bindings/phy/phy.h for constants.
+    const: 10
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - num-lanes
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      csi0_rx: phy@11c10000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c10000 0 0x2000>;
+        num-lanes = <2>;
+        #phy-cells = <1>;
+      };
+
+      csi1_rx: phy@11c12000 {
+        compatible = "mediatek,mt8365-csi-rx";
+        reg = <0 0x11c12000 0 0x2000>;
+        phy-type = <PHY_TYPE_DPHY>;
+        num-lanes = <2>;
+        #phy-cells = <0>;
+      };
+    };
+...
diff --git a/Bindings/phy/phy-cadence-torrent.yaml b/Bindings/phy/phy-cadence-torrent.yaml
index dfb3131..15dc8ef 100644
--- a/Bindings/phy/phy-cadence-torrent.yaml
+++ b/Bindings/phy/phy-cadence-torrent.yaml
@@ -20,6 +20,7 @@
   compatible:
     enum:
       - cdns,torrent-phy
+      - ti,j7200-serdes-10g
       - ti,j721e-serdes-10g
 
   '#address-cells':
@@ -35,14 +36,18 @@
     minItems: 1
     maxItems: 2
     description:
-      PHY reference clock for 1 item. Must contain an entry in clock-names.
-      Optional Parent to enable output reference clock.
+      PHY input reference clocks - refclk (for PLL0) & pll1_refclk (for PLL1).
+      pll1_refclk is optional and used for multi-protocol configurations requiring
+      separate reference clock for each protocol.
+      Same refclk is used for both PLL0 and PLL1 if no separate pll1_refclk is used.
+      Optional parent clock (phy_en_refclk) to enable a reference clock output feature
+      on some platforms to output either derived or received reference clock.
 
   clock-names:
     minItems: 1
     items:
       - const: refclk
-      - const: phy_en_refclk
+      - enum: [ pll1_refclk, phy_en_refclk ]
 
   reg:
     minItems: 1
diff --git a/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
new file mode 100644
index 0000000..f1f4e4f
--- /dev/null
+++ b/Bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB, MSM8998)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for USB-C on
+  several Qualcomm chipsets.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sdm660-qmp-usb3-phy
+      - qcom,sm6115-qmp-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: phy_phy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  orientation-switch:
+    description:
+      Flag the PHY as possible handler of USB Type-C orientation switching
+    type: boolean
+
+  qcom,tcsr-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the VLS CLAMP register
+    description: Clamp register present in the TCSR
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the PHY
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+  - qcom,tcsr-reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdm660-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sm6115-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+            - const: pipe
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    phy@c010000 {
+      compatible = "qcom,msm8998-qmp-usb3-phy";
+      reg = <0x0c010000 0x1000>;
+
+      clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+               <&gcc GCC_USB3_CLKREF_CLK>,
+               <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+               <&gcc GCC_USB3_PHY_PIPE_CLK>;
+      clock-names = "aux",
+                    "ref",
+                    "cfg_ahb",
+                    "pipe";
+      clock-output-names = "usb3_phy_pipe_clk_src";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      resets = <&gcc GCC_USB3_PHY_BCR>,
+               <&gcc GCC_USB3PHY_PHY_BCR>;
+      reset-names = "phy",
+                    "phy_phy";
+
+      vdda-phy-supply = <&vreg_l1a_0p875>;
+      vdda-pll-supply = <&vreg_l2a_1p2>;
+
+      orientation-switch;
+
+      qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          endpoint {
+            remote-endpoint = <&pmic_typec_mux_in>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          endpoint {
+            remote-endpoint = <&usb_dwc3_ss>;
+          };
+        };
+      };
+    };
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 6c03f2d..ba966a7 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -38,6 +38,8 @@
       - qcom,sm8550-qmp-gen4x2-pcie-phy
       - qcom,sm8650-qmp-gen3x2-pcie-phy
       - qcom,sm8650-qmp-gen4x2-pcie-phy
+      - qcom,x1e80100-qmp-gen3x2-pcie-phy
+      - qcom,x1e80100-qmp-gen4x2-pcie-phy
 
   reg:
     minItems: 1
@@ -151,6 +153,8 @@
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen3x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -194,6 +198,8 @@
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
+              - qcom,x1e80100-qmp-gen3x2-pcie-phy
+              - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
         resets:
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index 8474eef..91a6cc3 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -19,6 +19,7 @@
       - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,sa8775p-qmp-ufs-phy
+      - qcom,sc7180-qmp-ufs-phy
       - qcom,sc7280-qmp-ufs-phy
       - qcom,sc8180x-qmp-ufs-phy
       - qcom,sc8280xp-qmp-ufs-phy
@@ -38,15 +39,12 @@
     maxItems: 1
 
   clocks:
-    minItems: 1
+    minItems: 2
     maxItems: 3
 
   clock-names:
-    minItems: 1
-    items:
-      - const: ref
-      - const: ref_aux
-      - const: qref
+    minItems: 2
+    maxItems: 3
 
   power-domains:
     maxItems: 1
@@ -86,22 +84,9 @@
         compatible:
           contains:
             enum:
+              - qcom,msm8998-qmp-ufs-phy
               - qcom,sa8775p-qmp-ufs-phy
               - qcom,sc7280-qmp-ufs-phy
-              - qcom,sm8450-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          minItems: 3
-        clock-names:
-          minItems: 3
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
               - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
@@ -112,14 +97,19 @@
               - qcom,sm8150-qmp-ufs-phy
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
               - qcom,sm8650-qmp-ufs-phy
     then:
       properties:
         clocks:
-          maxItems: 2
+          minItems: 3
+          maxItems: 3
         clock-names:
-          maxItems: 2
+          items:
+            - const: ref
+            - const: ref_aux
+            - const: qref
 
   - if:
       properties:
@@ -130,22 +120,28 @@
     then:
       properties:
         clocks:
-          maxItems: 1
+          minItems: 2
+          maxItems: 2
         clock-names:
-          maxItems: 1
+          items:
+            - const: ref
+            - const: qref
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
     ufs_mem_phy: phy@1d87000 {
         compatible = "qcom,sc8280xp-qmp-ufs-phy";
         reg = <0x01d87000 0x1000>;
 
-        clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-        clock-names = "ref", "ref_aux";
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+                 <&gcc GCC_UFS_REF_CLKREF_CLK>;
+
+        clock-names = "ref", "ref_aux", "qref";
 
         power-domains = <&gcc UFS_PHY_GDSC>;
 
diff --git a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index 15d82c6..1e2d4dd 100644
--- a/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -20,15 +20,12 @@
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
-      - qcom,msm8998-qmp-usb3-phy
-      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
       - qcom,sdx65-qmp-usb3-uni-phy
       - qcom,sdx75-qmp-usb3-uni-phy
-      - qcom,sm6115-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-uni-phy
       - qcom,sm8350-qmp-usb3-uni-phy
@@ -93,7 +90,6 @@
               - qcom,ipq8074-qmp-usb3-phy
               - qcom,ipq9574-qmp-usb3-phy
               - qcom,msm8996-qmp-usb3-phy
-              - qcom,msm8998-qmp-usb3-phy
               - qcom,sdx55-qmp-usb3-uni-phy
               - qcom,sdx65-qmp-usb3-uni-phy
               - qcom,sdx75-qmp-usb3-uni-phy
@@ -113,24 +109,6 @@
         compatible:
           contains:
             enum:
-              - qcom,qcm2290-qmp-usb3-phy
-              - qcom,sm6115-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 4
-        clock-names:
-          items:
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-            - const: pipe
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,sa8775p-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-uni-phy
diff --git a/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml b/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml
new file mode 100644
index 0000000..54e822c
--- /dev/null
+++ b/Bindings/phy/rockchip,rk3588-hdptx-phy.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,rk3588-hdptx-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC HDMI/eDP Transmitter Combo PHY
+
+maintainers:
+  - Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-hdptx-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock
+      - description: APB clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: apb
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    items:
+      - description: PHY reset line
+      - description: APB reset line
+      - description: INIT reset line
+      - description: CMN reset line
+      - description: LANE reset line
+      - description: ROPLL reset line
+      - description: LCPLL reset line
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+      - const: init
+      - const: cmn
+      - const: lane
+      - const: ropll
+      - const: lcpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Some PHY related data is accessed through GRF regs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - resets
+  - reset-names
+  - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      phy@fed60000 {
+        compatible = "rockchip,rk3588-hdptx-phy";
+        reg = <0x0 0xfed60000 0x0 0x2000>;
+        clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>;
+        clock-names = "ref", "apb";
+        #phy-cells = <0>;
+        resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>,
+                 <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>,
+                 <&cru SRST_HDPTX0_LANE>, <&cru SRST_HDPTX0_ROPLL>,
+                 <&cru SRST_HDPTX0_LCPLL>;
+        reset-names = "phy", "apb", "init", "cmn", "lane", "ropll", "lcpll";
+        rockchip,grf = <&hdptxphy_grf>;
+      };
+    };
diff --git a/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
index c7df4cd..d9e0b2c 100644
--- a/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
+++ b/Bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
@@ -24,7 +24,7 @@
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
index 0942ea6..108719b 100644
--- a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
+++ b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
@@ -21,7 +21,7 @@
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
index e3c8bde..dc277f2 100644
--- a/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
+++ b/Bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
@@ -21,7 +21,7 @@
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
index c1b0314..add83c6 100644
--- a/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
+++ b/Bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
@@ -29,7 +29,7 @@
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
index 4ec85b8..412bbcc 100644
--- a/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
+++ b/Bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
@@ -29,7 +29,7 @@
   - compatible
 
 patternProperties:
-  "^bank@[0-9a-z]+$":
+  "^bank@[0-9a-f]+$":
     $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
 
     unevaluatedProperties: false
diff --git a/Bindings/pinctrl/atmel,at91-pinctrl.txt b/Bindings/pinctrl/atmel,at91-pinctrl.txt
index e8abbda..0aa1a53 100644
--- a/Bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -20,6 +20,7 @@
 Required properties for iomux controller:
 - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
 		or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
+		or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl"
 - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
   configured in this periph mode. All the periph and bank need to be describe.
 
@@ -120,6 +121,7 @@
 For each bank the required properties are:
 - compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
   "microchip,sam9x60-gpio"
+  or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"
 - reg: physical base address and length of the controller's registers
 - interrupts: interrupt outputs from the controller
 - interrupt-controller: marks the device node as an interrupt controller
diff --git a/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml b/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml
new file mode 100644
index 0000000..98c310a
--- /dev/null
+++ b/Bindings/pinctrl/awinic,aw9523-pinctrl.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/awinic,aw9523-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW9523/AW9523B I2C GPIO Expander
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The Awinic AW9523/AW9523B I2C GPIO Expander featuring 16 multi-function
+  I/O, 256 steps PWM mode and interrupt support.
+
+properties:
+  compatible:
+    const: awinic,aw9523-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    description: |
+      Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: Specifies the INTN pin IRQ.
+
+  '#interrupt-cells':
+    description:
+      Specifies the PIN numbers and Flags, as defined in defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  reset-gpios:
+    maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.
+        items:
+          pattern: "^gpio([0-9]|1[0-5])$"
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the
+          specified pins.
+
+        enum: [ gpio, pwm ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-open-drain: true
+      drive-push-pull: true
+      input-enable: true
+      input-disable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  # Example configuration to drive pins for a keyboard matrix
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        aw9523: gpio-expander@58 {
+                compatible = "awinic,aw9523-pinctrl";
+                reg = <0x58>;
+                interrupt-parent = <&tlmm>;
+                interrupts = <50 IRQ_TYPE_EDGE_FALLING>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 16>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+
+                keyboard-matrix-col-pins {
+                        pins = "gpio8", "gpio9", "gpio10", "gpio11",
+                               "gpio12", "gpio13", "gpio14", "gpio15";
+                        function = "gpio";
+                        input-disable;
+                        output-low;
+                };
+
+                keyboard-matrix-row-pins {
+                        pins = "gpio0", "gpio1", "gpio2", "gpio3",
+                               "gpio4", "gpio5", "gpio6", "gpio7";
+                        function = "gpio";
+                        bias-pull-up;
+                        drive-open-drain;
+                        input-enable;
+                };
+        };
+    };
diff --git a/Bindings/pinctrl/cirrus,madera.yaml b/Bindings/pinctrl/cirrus,madera.yaml
index bb61a30..482acda 100644
--- a/Bindings/pinctrl/cirrus,madera.yaml
+++ b/Bindings/pinctrl/cirrus,madera.yaml
@@ -93,7 +93,8 @@
 
           input-schmitt-disable: true
 
-          input-debounce: true
+          input-debounce:
+            maxItems: 1
 
           output-low: true
 
diff --git a/Bindings/pinctrl/cypress,cy8c95x0.yaml b/Bindings/pinctrl/cypress,cy8c95x0.yaml
index 7f30ec2..700ac86 100644
--- a/Bindings/pinctrl/cypress,cy8c95x0.yaml
+++ b/Bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -45,7 +45,8 @@
     maxItems: 1
 
   gpio-reserved-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 60
 
   vdd-supply:
     description:
@@ -85,6 +86,8 @@
 
       bias-disable: true
 
+      input-enable: true
+
       output-high: true
 
       output-low: true
@@ -133,6 +136,23 @@
         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
         interrupt-controller;
         vdd-supply = <&p3v3>;
-        gpio-reserved-ranges = <5 1>;
+        gpio-reserved-ranges = <1 2>, <6 1>, <10 1>, <15 1>;
+
+        pinctrl-0 = <&U62160_pins>, <&U62160_ipins>;
+        pinctrl-names = "default";
+
+        U62160_pins: cfg-pins {
+          pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+          function = "gpio";
+          input-enable;
+          bias-pull-up;
+        };
+
+        U62160_ipins: icfg-pins {
+          pins = "gp04", "gp17", "gp21", "gp52", "gp53";
+          function = "gpio";
+          input-enable;
+          bias-pull-up;
+        };
       };
     };
diff --git a/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt
deleted file mode 100644
index 7ca4f61..0000000
--- a/Bindings/pinctrl/fsl,imx6ul-pinctrl.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* Freescale i.MX6 UltraLite IOMUX Controller
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or
-  "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller.
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx6ul-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX6 UltraLite
-  Reference Manual for detailed CONFIG settings.
-
-CONFIG bits definition:
-PAD_CTL_HYS                     (1 << 16)
-PAD_CTL_PUS_100K_DOWN           (0 << 14)
-PAD_CTL_PUS_47K_UP              (1 << 14)
-PAD_CTL_PUS_100K_UP             (2 << 14)
-PAD_CTL_PUS_22K_UP              (3 << 14)
-PAD_CTL_PUE                     (1 << 13)
-PAD_CTL_PKE                     (1 << 12)
-PAD_CTL_ODE                     (1 << 11)
-PAD_CTL_SPEED_LOW               (0 << 6)
-PAD_CTL_SPEED_MED               (1 << 6)
-PAD_CTL_SPEED_HIGH              (3 << 6)
-PAD_CTL_DSE_DISABLE             (0 << 3)
-PAD_CTL_DSE_260ohm              (1 << 3)
-PAD_CTL_DSE_130ohm              (2 << 3)
-PAD_CTL_DSE_87ohm               (3 << 3)
-PAD_CTL_DSE_65ohm               (4 << 3)
-PAD_CTL_DSE_52ohm               (5 << 3)
-PAD_CTL_DSE_43ohm               (6 << 3)
-PAD_CTL_DSE_37ohm               (7 << 3)
-PAD_CTL_SRE_FAST                (1 << 0)
-PAD_CTL_SRE_SLOW                (0 << 0)
diff --git a/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml b/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
new file mode 100644
index 0000000..906b264
--- /dev/null
+++ b/Bindings/pinctrl/fsl,imx6ul-pinctrl.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx6ul-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX6UL IOMUX Controller
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6ul-iomuxc
+      - fsl,imx6ull-iomuxc-snvs
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imx6ul-pinfunc.h>. The last integer
+          CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX6UL Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied:
+                  PAD_CTL_HYS                     (1 << 16)
+                  PAD_CTL_PUS_100K_DOWN           (0 << 14)
+                  PAD_CTL_PUS_47K_UP              (1 << 14)
+                  PAD_CTL_PUS_100K_UP             (2 << 14)
+                  PAD_CTL_PUS_22K_UP              (3 << 14)
+                  PAD_CTL_PUE                     (1 << 13)
+                  PAD_CTL_PKE                     (1 << 12)
+                  PAD_CTL_ODE                     (1 << 11)
+                  PAD_CTL_SPEED_LOW               (0 << 6)
+                  PAD_CTL_SPEED_MED               (1 << 6)
+                  PAD_CTL_SPEED_HIGH              (3 << 6)
+                  PAD_CTL_DSE_DISABLE             (0 << 3)
+                  PAD_CTL_DSE_260ohm              (1 << 3)
+                  PAD_CTL_DSE_130ohm              (2 << 3)
+                  PAD_CTL_DSE_87ohm               (3 << 3)
+                  PAD_CTL_DSE_65ohm               (4 << 3)
+                  PAD_CTL_DSE_52ohm               (5 << 3)
+                  PAD_CTL_DSE_43ohm               (6 << 3)
+                  PAD_CTL_DSE_37ohm               (7 << 3)
+                  PAD_CTL_SRE_FAST                (1 << 0)
+                  PAD_CTL_SRE_SLOW                (0 << 0)
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: pinctrl@20e0000 {
+      compatible = "fsl,imx6ul-iomuxc";
+      reg = <0x020e0000 0x4000>;
+
+      mux_uart: uartgrp {
+        fsl,pins = <
+          0x0084 0x0310 0x0000 0 0 0x1b0b1
+          0x0088 0x0314 0x0624 0 3 0x1b0b1
+        >;
+      };
+    };
+  - |
+    iomuxc_snvs: pinctrl@2290000 {
+      compatible = "fsl,imx6ull-iomuxc-snvs";
+      reg = <0x02290000 0x4000>;
+
+      pinctrl_snvs_usbc_det: snvsusbcdetgrp {
+        fsl,pins = <
+          0x0010 0x0054 0x0000 0x5 0x0 0x130b0
+        >;
+      };
+    };
diff --git a/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
new file mode 100644
index 0000000..5f00604
--- /dev/null
+++ b/Bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 pin controller
+
+description: >
+  The EyeQ5 pin controller handles the two pin banks of the system. It belongs
+  to a system-controller block called OLB.
+
+  Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
+  muxing supports two functions for each pin: first is GPIO, second is
+  pin-dependent.
+
+  Pins and groups are bijective.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+$ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mobileye,eyeq5-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "-pins?$":
+    type: object
+    description: Pin muxing configuration.
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+    properties:
+      pins: true
+      function:
+        enum: [gpio,
+               # Bank A
+               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
+               spi1, refclk0,
+               # Bank B
+               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+    required:
+      - pins
+      - function
+    allOf:
+      - if:
+          properties:
+            function:
+              const: gpio
+        then:
+          properties:
+            pins:
+              items: # PA0 - PA28, PB0 - PB22
+                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
+      - if:
+          properties:
+            function:
+              const: timer0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA0, PA1]
+      - if:
+          properties:
+            function:
+              const: timer1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA2, PA3]
+      - if:
+          properties:
+            function:
+              const: timer2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA4, PA5]
+      - if:
+          properties:
+            function:
+              const: timer5
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA6, PA7, PA8, PA9]
+      - if:
+          properties:
+            function:
+              const: uart0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA10, PA11]
+      - if:
+          properties:
+            function:
+              const: uart1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA12, PA13]
+      - if:
+          properties:
+            function:
+              const: can0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA14, PA15]
+      - if:
+          properties:
+            function:
+              const: can1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA16, PA17]
+      - if:
+          properties:
+            function:
+              const: spi0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA18, PA19, PA20, PA21, PA22]
+      - if:
+          properties:
+            function:
+              const: spi1
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA23, PA24, PA25, PA26, PA27]
+      - if:
+          properties:
+            function:
+              const: refclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PA28]
+      - if:
+          properties:
+            function:
+              const: timer3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB0, PB1]
+      - if:
+          properties:
+            function:
+              const: timer4
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB2, PB3]
+      - if:
+          properties:
+            function:
+              const: timer6
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB4, PB5, PB6, PB7]
+      - if:
+          properties:
+            function:
+              const: uart2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB8, PB9]
+      - if:
+          properties:
+            function:
+              const: can2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB10, PB11]
+      - if:
+          properties:
+            function:
+              const: spi2
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB12, PB13, PB14, PB15, PB16]
+      - if:
+          properties:
+            function:
+              const: spi3
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB17, PB18, PB19, PB20, PB21]
+      - if:
+          properties:
+            function:
+              const: mclk0
+        then:
+          properties:
+            pins:
+              items:
+                enum: [PB22]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
diff --git a/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
index 3e84728..b55d9c3 100644
--- a/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
+++ b/Bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
@@ -152,7 +152,6 @@
         description:
           Debouncing periods in microseconds, one period per interrupt
           bank found in the controller
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 4
 
@@ -160,7 +159,6 @@
         description: |
           0: Low rate
           1: High rate
-        $ref: /schemas/types.yaml#/definitions/uint32
         enum: [0, 1]
 
       drive-strength:
diff --git a/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
index 7b7f840..08442c8 100644
--- a/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
+++ b/Bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -103,7 +103,8 @@
         items:
           pattern: "^gpio1?[0-9]{1,2}$"
 
-      input-debounce: true
+      input-debounce:
+        maxItems: 1
 
     additionalProperties: false
 
diff --git a/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
index f3deda9..db8224d 100644
--- a/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
+++ b/Bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -10,18 +10,21 @@
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-$ref: nvidia,tegra234-pinmux-common.yaml
-
 properties:
   compatible:
     const: nvidia,tegra234-pinmux-aon
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^pinmux(-[a-z0-9-]+)?$":
     type: object
 
     # pin groups
     additionalProperties:
+      $ref: nvidia,tegra234-pinmux-common.yaml
+
       properties:
         nvidia,pins:
           items:
diff --git a/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
index 4f9de78..8cf9e4c 100644
--- a/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
+++ b/Bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -10,57 +10,43 @@
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
+$ref: nvidia,tegra-pinmux-common.yaml
+
 properties:
-  reg:
-    items:
-      - description: pinmux registers
+  nvidia,function:
+    enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+            eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+            pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+            sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+            usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+            i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+            dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+            ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+            displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+            tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
 
-patternProperties:
-  "^pinmux(-[a-z0-9-]+)?$":
-    type: object
-
-    # pin groups
-    additionalProperties:
-      $ref: nvidia,tegra-pinmux-common.yaml
-      # We would typically use unevaluatedProperties here but that has the
-      # downside that all the properties in the common bindings become valid
-      # for all chip generations. In this case, however, we want the per-SoC
-      # bindings to be able to override which of the common properties are
-      # allowed, since not all pinmux generations support the same sets of
-      # properties. This way, the common bindings define the format of the
-      # properties but the per-SoC bindings define which of them apply to a
-      # given chip.
-      additionalProperties: false
-      properties:
-        nvidia,function:
-          enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
-                  eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
-                  pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
-                  sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
-                  usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
-                  i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
-                  dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
-                  ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
-                  displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
-                  tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
-
-        # out of the common properties, only these are allowed for Tegra234
-        nvidia,pins: true
-        nvidia,pull: true
-        nvidia,tristate: true
-        nvidia,schmitt: true
-        nvidia,enable-input: true
-        nvidia,open-drain: true
-        nvidia,lock: true
-        nvidia,drive-type: true
-        nvidia,io-hv: true
-
-      required:
-        - nvidia,pins
+  # out of the common properties, only these are allowed for Tegra234
+  nvidia,pins: true
+  nvidia,pull: true
+  nvidia,tristate: true
+  nvidia,schmitt: true
+  nvidia,enable-input: true
+  nvidia,open-drain: true
+  nvidia,lock: true
+  nvidia,drive-type: true
+  nvidia,io-hv: true
 
 required:
-  - compatible
-  - reg
+  - nvidia,pins
 
-additionalProperties: true
+# We would typically use unevaluatedProperties here but that has the
+# downside that all the properties in the common bindings become valid
+# for all chip generations. In this case, however, we want the per-SoC
+# bindings to be able to override which of the common properties are
+# allowed, since not all pinmux generations support the same sets of
+# properties. This way, the common bindings define the format of the
+# properties but the per-SoC bindings define which of them apply to a
+# given chip.
+additionalProperties: false
+
 ...
diff --git a/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml
index 17b865e..f5a3a88 100644
--- a/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml
+++ b/Bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -10,18 +10,21 @@
   - Thierry Reding <thierry.reding@gmail.com>
   - Jon Hunter <jonathanh@nvidia.com>
 
-$ref: nvidia,tegra234-pinmux-common.yaml
-
 properties:
   compatible:
     const: nvidia,tegra234-pinmux
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^pinmux(-[a-z0-9-]+)?$":
     type: object
 
     # pin groups
     additionalProperties:
+      $ref: nvidia,tegra234-pinmux-common.yaml
+
       properties:
         nvidia,pins:
           items:
diff --git a/Bindings/pinctrl/pincfg-node.yaml b/Bindings/pinctrl/pincfg-node.yaml
index be81ed2..d0af21a 100644
--- a/Bindings/pinctrl/pincfg-node.yaml
+++ b/Bindings/pinctrl/pincfg-node.yaml
@@ -97,7 +97,7 @@
     description: disable schmitt-trigger mode
 
   input-debounce:
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Takes the debounce time in usec as argument or 0 to disable
       debouncing
 
diff --git a/Bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb08ca5..bb675c8 100644
--- a/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -17,7 +17,7 @@
 
 properties:
   compatible:
-    const: qcom,sm4450-pinctrl
+    const: qcom,sm4450-tlmm
 
   reg:
     maxItems: 1
diff --git a/Bindings/pinctrl/renesas,pfc.yaml b/Bindings/pinctrl/renesas,pfc.yaml
index 181cd16..5d84364 100644
--- a/Bindings/pinctrl/renesas,pfc.yaml
+++ b/Bindings/pinctrl/renesas,pfc.yaml
@@ -46,6 +46,7 @@
       - renesas,pfc-r8a779a0    # R-Car V3U
       - renesas,pfc-r8a779f0    # R-Car S4-8
       - renesas,pfc-r8a779g0    # R-Car V4H
+      - renesas,pfc-r8a779h0    # R-Car V4M
       - renesas,pfc-sh73a0      # SH-Mobile AG5
 
   reg:
diff --git a/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index d476de8..4d5a957 100644
--- a/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -120,7 +120,9 @@
         slew-rate: true
         gpio-hog: true
         gpios: true
+        input: true
         input-enable: true
+        output-enable: true
         output-high: true
         output-low: true
         line-name: true
diff --git a/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Bindings/pinctrl/xlnx,pinctrl-zynq.yaml
similarity index 97%
rename from Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
rename to Bindings/pinctrl/xlnx,pinctrl-zynq.yaml
index d2676f9..de6c10b 100644
--- a/Bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/Bindings/pinctrl/xlnx,pinctrl-zynq.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/xlnx,pinctrl-zynq.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xilinx Zynq Pinctrl
@@ -28,7 +28,7 @@
 
 properties:
   compatible:
-    const: xlnx,zynq-pinctrl
+    const: xlnx,pinctrl-zynq
 
   reg:
     description: Specifies the base address and size of the SLCR space.
@@ -181,7 +181,7 @@
   - |
     #include <dt-bindings/pinctrl/pinctrl-zynq.h>
     pinctrl0: pinctrl@700 {
-       compatible = "xlnx,zynq-pinctrl";
+       compatible = "xlnx,pinctrl-zynq";
        reg = <0x700 0x200>;
        syscon = <&slcr>;
 
diff --git a/Bindings/power/qcom,rpmpd.yaml b/Bindings/power/qcom,rpmpd.yaml
index 2ff246c..929b7ef 100644
--- a/Bindings/power/qcom,rpmpd.yaml
+++ b/Bindings/power/qcom,rpmpd.yaml
@@ -24,6 +24,8 @@
           - qcom,msm8917-rpmpd
           - qcom,msm8939-rpmpd
           - qcom,msm8953-rpmpd
+          - qcom,msm8974-rpmpd
+          - qcom,msm8974pro-pma8084-rpmpd
           - qcom,msm8976-rpmpd
           - qcom,msm8994-rpmpd
           - qcom,msm8996-rpmpd
diff --git a/Bindings/power/renesas,rcar-sysc.yaml b/Bindings/power/renesas,rcar-sysc.yaml
index 0720b54..e76fb27 100644
--- a/Bindings/power/renesas,rcar-sysc.yaml
+++ b/Bindings/power/renesas,rcar-sysc.yaml
@@ -45,6 +45,7 @@
       - renesas,r8a779a0-sysc # R-Car V3U
       - renesas,r8a779f0-sysc # R-Car S4-8
       - renesas,r8a779g0-sysc # R-Car V4H
+      - renesas,r8a779h0-sysc # R-Car V4M
 
   reg:
     maxItems: 1
diff --git a/Bindings/power/wakeup-source.txt b/Bindings/power/wakeup-source.txt
index 75bc20b..a6c8978 100644
--- a/Bindings/power/wakeup-source.txt
+++ b/Bindings/power/wakeup-source.txt
@@ -27,7 +27,7 @@
 				Documentation/devicetree/bindings/mfd/tc3589x.txt
 				Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
 4. "linux,keypad-wakeup"	Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
-5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung-keypad.txt
+5. "linux,input-wakeup"		Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
 6. "nvidia,wakeup-source"	Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
 
 Examples
diff --git a/Bindings/pwm/atmel,hlcdc-pwm.yaml b/Bindings/pwm/atmel,hlcdc-pwm.yaml
new file mode 100644
index 0000000..0e92868
--- /dev/null
+++ b/Bindings/pwm/atmel,hlcdc-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCDC's PWM controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block
+  generates the LCD contrast control signal (LCD_PWM) that controls the
+  display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be
+  converted to an analog voltage with a simple passive filter. LCD display
+  panels have different backlight specifications in terms of minimum/maximum
+  values for PWM frequency. If the LCDC PWM frequency range does not match the
+  LCD display panel, it is possible to use the standalone PWM Controller to
+  drive the backlight.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-pwm
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - "#pwm-cells"
+
+additionalProperties: false
diff --git a/Bindings/pwm/atmel-hlcdc-pwm.txt b/Bindings/pwm/atmel-hlcdc-pwm.txt
deleted file mode 100644
index afa501b..0000000
--- a/Bindings/pwm/atmel-hlcdc-pwm.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
-
-The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
-See ../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,hlcdc-pwm"
- - pinctr-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the pinctrl states described by pinctrl
-   default.
- - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
-   bindings defined in pwm.yaml in this directory.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git a/Bindings/pwm/marvell,pxa-pwm.yaml b/Bindings/pwm/marvell,pxa-pwm.yaml
new file mode 100644
index 0000000..ba63255
--- /dev/null
+++ b/Bindings/pwm/marvell,pxa-pwm.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/marvell,pxa-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA PWM
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa250-pwm
+      - marvell,pxa270-pwm
+      - marvell,pxa168-pwm
+      - marvell,pxa910-pwm
+
+  reg:
+    # Length should be 0x10
+    maxItems: 1
+
+  "#pwm-cells":
+    # Used for specifying the period length in nanoseconds
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/pxa-clock.h>
+
+    pwm0: pwm@40b00000 {
+      compatible = "marvell,pxa250-pwm";
+      reg = <0x40b00000 0x10>;
+      #pwm-cells = <1>;
+      clocks = <&clks CLK_PWM0>;
+    };
diff --git a/Bindings/pwm/mediatek,mt2712-pwm.yaml b/Bindings/pwm/mediatek,mt2712-pwm.yaml
index 0fbe8a6..a5c3088 100644
--- a/Bindings/pwm/mediatek,mt2712-pwm.yaml
+++ b/Bindings/pwm/mediatek,mt2712-pwm.yaml
@@ -24,6 +24,7 @@
           - mediatek,mt7629-pwm
           - mediatek,mt7981-pwm
           - mediatek,mt7986-pwm
+          - mediatek,mt7988-pwm
           - mediatek,mt8183-pwm
           - mediatek,mt8365-pwm
           - mediatek,mt8516-pwm
diff --git a/Bindings/pwm/mediatek,pwm-disp.yaml b/Bindings/pwm/mediatek,pwm-disp.yaml
index afcdeed..bc813fe 100644
--- a/Bindings/pwm/mediatek,pwm-disp.yaml
+++ b/Bindings/pwm/mediatek,pwm-disp.yaml
@@ -52,6 +52,9 @@
       - const: main
       - const: mm
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/pwm/opencores,pwm.yaml b/Bindings/pwm/opencores,pwm.yaml
new file mode 100644
index 0000000..52a59d2
--- /dev/null
+++ b/Bindings/pwm/opencores,pwm.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/opencores,pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores PWM controller
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+description:
+  The OpenCores PTC ip core contains a PWM controller. When operating in PWM
+  mode, the PTC core generates binary signal with user-programmable low and
+  high periods. All PTC counters and registers are 32-bit.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7100-pwm
+          - starfive,jh7110-pwm
+          - starfive,jh8100-pwm
+      - const: opencores,pwm-v1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@12490000 {
+        compatible = "starfive,jh7110-pwm", "opencores,pwm-v1";
+        reg = <0x12490000 0x10000>;
+        clocks = <&clkgen 181>;
+        resets = <&rstgen 109>;
+        #pwm-cells = <3>;
+    };
diff --git a/Bindings/pwm/pwm-amlogic.yaml b/Bindings/pwm/pwm-amlogic.yaml
index 527864a..1d71d4f 100644
--- a/Bindings/pwm/pwm-amlogic.yaml
+++ b/Bindings/pwm/pwm-amlogic.yaml
@@ -9,9 +9,6 @@
 maintainers:
   - Heiner Kallweit <hkallweit1@gmail.com>
 
-allOf:
-  - $ref: pwm.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -24,31 +21,40 @@
           - amlogic,meson-g12a-ee-pwm
           - amlogic,meson-g12a-ao-pwm-ab
           - amlogic,meson-g12a-ao-pwm-cd
-          - amlogic,meson-s4-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson-gx-pwm
           - const: amlogic,meson-gxbb-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson-gx-ao-pwm
           - const: amlogic,meson-gxbb-ao-pwm
+        deprecated: true
       - items:
           - const: amlogic,meson8-pwm
           - const: amlogic,meson8b-pwm
+        deprecated: true
+      - enum:
+          - amlogic,meson8-pwm-v2
+          - amlogic,meson-s4-pwm
+      - items:
+          - enum:
+              - amlogic,meson8b-pwm-v2
+              - amlogic,meson-gxbb-pwm-v2
+              - amlogic,meson-axg-pwm-v2
+              - amlogic,meson-g12-pwm-v2
+          - const: amlogic,meson8-pwm-v2
 
   reg:
     maxItems: 1
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 4
 
   clock-names:
-    oneOf:
-      - items:
-          - enum: [clkin0, clkin1]
-      - items:
-          - const: clkin0
-          - const: clkin1
+    minItems: 1
+    maxItems: 2
 
   "#pwm-cells":
     const: 3
@@ -57,6 +63,79 @@
   - compatible
   - reg
 
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-pwm
+              - amlogic,meson8b-pwm
+              - amlogic,meson-gxbb-pwm
+              - amlogic,meson-gxbb-ao-pwm
+              - amlogic,meson-axg-ee-pwm
+              - amlogic,meson-axg-ao-pwm
+              - amlogic,meson-g12a-ee-pwm
+              - amlogic,meson-g12a-ao-pwm-ab
+              - amlogic,meson-g12a-ao-pwm-cd
+    then:
+      # Obsolete historic bindings tied to the driver implementation
+      # The clocks provided here are meant to be matched with the input
+      # known (hard-coded) in the driver and used to select pwm clock
+      # source. Currently, the linux driver ignores this.
+      # This is kept to maintain ABI backward compatibility.
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          oneOf:
+            - items:
+                - enum: [clkin0, clkin1]
+            - items:
+                - const: clkin0
+                - const: clkin1
+
+  # Newer binding where clock describe the actual clock inputs of the pwm
+  # block. These are necessary but some inputs may be grounded.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson8-pwm-v2
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: input clock 0 of the pwm block
+            - description: input clock 1 of the pwm block
+            - description: input clock 2 of the pwm block
+            - description: input clock 3 of the pwm block
+        clock-names: false
+      required:
+        - clocks
+
+  # Newer IP block take a single input per channel, instead of 4 inputs
+  # for both channels
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,meson-s4-pwm
+    then:
+      properties:
+        clocks:
+          items:
+            - description: input clock of PWM channel A
+            - description: input clock of PWM channel B
+        clock-names: false
+      required:
+        - clocks
+
 additionalProperties: false
 
 examples:
@@ -68,3 +147,17 @@
       clock-names = "clkin0", "clkin1";
       #pwm-cells = <3>;
     };
+  - |
+    pwm@2000 {
+      compatible = "amlogic,meson8-pwm-v2";
+      reg = <0x1000 0x10>;
+      clocks = <&xtal>, <0>, <&fdiv4>, <&fdiv5>;
+      #pwm-cells = <3>;
+    };
+  - |
+    pwm@1000 {
+      compatible = "amlogic,meson-s4-pwm";
+      reg = <0x1000 0x10>;
+      clocks = <&pwm_src_a>, <&pwm_src_b>;
+      #pwm-cells = <3>;
+    };
diff --git a/Bindings/pwm/pxa-pwm.txt b/Bindings/pwm/pxa-pwm.txt
deleted file mode 100644
index 5ae9f1e..0000000
--- a/Bindings/pwm/pxa-pwm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Marvell PWM controller
-
-Required properties:
-- compatible: should be one or more of:
-  - "marvell,pxa250-pwm"
-  - "marvell,pxa270-pwm"
-  - "marvell,pxa168-pwm"
-  - "marvell,pxa910-pwm"
-- reg: Physical base address and length of the registers used by the PWM channel
-  Note that one device instance must be created for each PWM that is used, so the
-  length covers only the register window for one PWM output, not that of the
-  entire PWM controller.  Currently length is 0x10 for all supported devices.
-- #pwm-cells: Should be 1.  This cell is used to specify the period in
-  nanoseconds.
-
-Example PWM device node:
-
-pwm0: pwm@40b00000 {
-	compatible = "marvell,pxa250-pwm";
-	reg = <0x40b00000 0x10>;
-	#pwm-cells = <1>;
-};
-
-Example PWM client node:
-
-backlight {
-	compatible = "pwm-backlight";
-	pwms = <&pwm0 5000000>;
-	...
-}
diff --git a/Bindings/regulator/gpio-regulator.yaml b/Bindings/regulator/gpio-regulator.yaml
index f4c1f36..a34e857 100644
--- a/Bindings/regulator/gpio-regulator.yaml
+++ b/Bindings/regulator/gpio-regulator.yaml
@@ -47,6 +47,7 @@
         1: HIGH
       Default is LOW if nothing else is specified.
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
     maxItems: 8
     items:
       enum: [0, 1]
@@ -57,7 +58,8 @@
       regulator and matching GPIO configurations to achieve them. If there are
       no states in the "states" array, use a fixed regulator instead.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
-    maxItems: 8
+    minItems: 2
+    maxItems: 256
     items:
       items:
         - description: Voltage in microvolts
diff --git a/Bindings/regulator/infineon,ir38060.yaml b/Bindings/regulator/infineon,ir38060.yaml
new file mode 100644
index 0000000..e6ffbc2
--- /dev/null
+++ b/Bindings/regulator/infineon,ir38060.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon Buck Regulators with PMBUS interfaces
+
+maintainers:
+  - Not Me.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - infineon,ir38060
+      - infineon,ir38064
+      - infineon,ir38164
+      - infineon,ir38263
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@34 {
+        compatible = "infineon,ir38060";
+        reg = <0x34>;
+
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+      };
+    };
diff --git a/Bindings/regulator/mcp16502-regulator.txt b/Bindings/regulator/mcp16502-regulator.txt
deleted file mode 100644
index 451cc4e..0000000
--- a/Bindings/regulator/mcp16502-regulator.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-MCP16502 PMIC
-
-Required properties:
-- compatible: "microchip,mcp16502"
-- reg: I2C slave address
-- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
-	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
-	     property is optional;
-- regulators: A node that houses a sub-node for each regulator within
-              the device. Each sub-node is identified using the node's
-              name. The content of each sub-node is defined by the
-              standard binding for regulators; see regulator.txt.
-
-Regulators of MCP16502 PMIC:
-1) VDD_IO	- Buck (1.2 - 3.7 V)
-2) VDD_DDR	- Buck (0.6 - 1.85 V)
-3) VDD_CORE	- Buck (0.6 - 1.85 V)
-4) VDD_OTHER	- BUCK (0.6 - 1.85 V)
-5) LDO1		- LDO  (1.2 - 3.7 V)
-6) LDO2		- LDO  (1.2 - 3.7 V)
-
-Regulator modes:
-2 - FPWM: higher precision, higher consumption
-4 - AutoPFM: lower precision, lower consumption
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-mcp16502@5b {
-	compatible = "microchip,mcp16502";
-	reg = <0x5b>;
-	status = "okay";
-	lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
-
-	regulators {
-		VDD_IO {
-			regulator-name = "VDD_IO";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_DDR {
-			regulator-name = "VDD_DDR";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_CORE {
-			regulator-name = "VDD_CORE";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_OTHER {
-			regulator-name = "VDD_OTHER";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-	};
-};
diff --git a/Bindings/regulator/microchip,mcp16502.yaml b/Bindings/regulator/microchip,mcp16502.yaml
new file mode 100644
index 0000000..1aca364
--- /dev/null
+++ b/Bindings/regulator/microchip,mcp16502.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCP16502 - High-Performance PMIC
+
+maintainers:
+  - Andrei Simion <andrei.simion@microchip.com>
+
+description:
+  The MCP16502 is an optimally integrated PMIC compatible
+  with Microchip's eMPUs(Embedded Microprocessor Units),
+  requiring Dynamic Voltage Scaling (DVS) with the use
+  of High-Performance mode (HPM).
+
+properties:
+  compatible:
+    const: microchip,mcp16502
+
+  lpm-gpios:
+    maxItems: 1
+    description: GPIO for LPM pin.
+      Note that this GPIO must remain high during
+      suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: List of regulators and its properties.
+
+    patternProperties:
+      "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-initial-mode:
+            enum: [2, 4]
+            default: 2
+            description: Initial operating mode
+
+          regulator-allowed-modes:
+            items:
+              enum: [2, 4]
+            description: Supported modes
+              2 - FPWM higher precision, higher consumption
+              4 - AutoPFM lower precision, lower consumption
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@5b {
+            compatible = "microchip,mcp16502";
+            reg = <0x5b>;
+
+            regulators {
+                VDD_IO {
+                    regulator-name = "VDD_IO";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_DDR {
+                    regulator-name = "VDD_DDR";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_CORE {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <1150000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_OTHER {
+                    regulator-name = "VDD_OTHER";
+                    regulator-min-microvolt = <1050000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3700000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Bindings/regulator/qcom,usb-vbus-regulator.yaml b/Bindings/regulator/qcom,usb-vbus-regulator.yaml
index 534f87e..33ae1f7 100644
--- a/Bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -19,8 +19,15 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8150b-vbus-reg
+    oneOf:
+      - enum:
+          - qcom,pm8150b-vbus-reg
+      - items:
+          - enum:
+              - qcom,pm4125-vbus-reg
+              - qcom,pm6150-vbus-reg
+              - qcom,pmi632-vbus-reg
+          - const: qcom,pm8150b-vbus-reg
 
   reg:
     maxItems: 1
diff --git a/Bindings/regulator/ti,tps65132.yaml b/Bindings/regulator/ti,tps65132.yaml
new file mode 100644
index 0000000..6a6d1a3
--- /dev/null
+++ b/Bindings/regulator/ti,tps65132.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS65132 Dual Output Power Regulators
+
+maintainers:
+  - devicetree@vger.kernel.org
+
+description: |
+  The TPS65132 is designed to supply positive/negative driven applications.
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps65132
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65132
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^out[pn]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single regulator.
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+      active-discharge-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to actively discharge the delay mechanism.
+
+      ti,active-discharge-time-us:
+        description: Regulator active discharge time in microseconds.
+
+    dependencies:
+      active-discharge-gpios: [ 'ti,active-discharge-time-us' ]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3e {
+            compatible = "ti,tps65132";
+            reg = <0x3e>;
+
+            outp {
+                regulator-name = "outp";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+            };
+
+            outn {
+                regulator-name = "outn";
+                regulator-boot-on;
+                regulator-always-on;
+                regulator-active-discharge = <0>;
+                enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>;
+            };
+        };
+    };
diff --git a/Bindings/regulator/tps65132-regulator.txt b/Bindings/regulator/tps65132-regulator.txt
deleted file mode 100644
index 3a35055..0000000
--- a/Bindings/regulator/tps65132-regulator.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-TPS65132 regulators
-
-Required properties:
-- compatible: "ti,tps65132"
-- reg: I2C slave address
-
-Optional Subnode:
-Device supports two regulators OUTP and OUTN. A sub node within the
-   device node describe the properties of these regulators. The sub-node
-   names must be as follows:
-	-For regulator outp, the sub node name should be "outp".
-	-For regulator outn, the sub node name should be "outn".
-
--enable-gpios:(active high, output) Regulators are controlled by the input pins.
-   If it is connected to GPIO through host system then provide the
-   gpio number as per gpio.txt.
--active-discharge-gpios: (active high, output) Some configurations use delay mechanisms
-  on the enable pin, to keep the regulator enabled for some time after
-  the enable signal goes low. This GPIO is used to actively discharge
-  the delay mechanism. Requires specification of ti,active-discharge-time-us
--ti,active-discharge-time-us: how long the active discharge gpio should be
-  asserted for during active discharge, in microseconds.
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-	tps65132@3e {
-		compatible = "ti,tps65132";
-		reg = <0x3e>;
-
-		outp {
-			regulator-name = "outp";
-			regulator-boot-on;
-			regulator-always-on;
-			enable-gpios = <&gpio 23 0>;
-		};
-
-		outn {
-			regulator-name = "outn";
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-active-discharge = <0>;
-			enable-gpios = <&gpio 40 0>;
-		};
-	};
diff --git a/Bindings/remoteproc/mtk,scp.yaml b/Bindings/remoteproc/mtk,scp.yaml
index 09102dd..507f98f 100644
--- a/Bindings/remoteproc/mtk,scp.yaml
+++ b/Bindings/remoteproc/mtk,scp.yaml
@@ -47,7 +47,7 @@
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       If present, name (or relative path) of the file within the
       firmware search path containing the firmware image used when
@@ -115,7 +115,7 @@
         maxItems: 1
 
       firmware-name:
-        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
         description:
           If present, name (or relative path) of the file within the
           firmware search path containing the firmware image used when
diff --git a/Bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Bindings/remoteproc/qcom,glink-rpm-edge.yaml
index 884158b..3766d45 100644
--- a/Bindings/remoteproc/qcom,glink-rpm-edge.yaml
+++ b/Bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -18,7 +18,6 @@
     const: qcom,glink-rpm
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description:
       Name of the edge, used for debugging and identification purposes. The
       node name will be used if this is not present.
diff --git a/Bindings/remoteproc/qcom,qcs404-pas.yaml b/Bindings/remoteproc/qcom,qcs404-pas.yaml
index eb868a7..ad45fd0 100644
--- a/Bindings/remoteproc/qcom,qcs404-pas.yaml
+++ b/Bindings/remoteproc/qcom,qcs404-pas.yaml
@@ -46,7 +46,7 @@
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sc7180-pas.yaml b/Bindings/remoteproc/qcom,sc7180-pas.yaml
index c054b84..66b455d 100644
--- a/Bindings/remoteproc/qcom,sc7180-pas.yaml
+++ b/Bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -45,7 +45,7 @@
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index b6bd334..9381c70 100644
--- a/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -80,7 +80,7 @@
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       The name of the firmware which should be loaded for this remote
       processor.
diff --git a/Bindings/remoteproc/qcom,sc8180x-pas.yaml b/Bindings/remoteproc/qcom,sc8180x-pas.yaml
index 4744a37..45ee9fb 100644
--- a/Bindings/remoteproc/qcom,sc8180x-pas.yaml
+++ b/Bindings/remoteproc/qcom,sc8180x-pas.yaml
@@ -42,7 +42,7 @@
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm6115-pas.yaml b/Bindings/remoteproc/qcom,sm6115-pas.yaml
index 0282872..758adb0 100644
--- a/Bindings/remoteproc/qcom,sm6115-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm6115-pas.yaml
@@ -47,7 +47,7 @@
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm6350-pas.yaml b/Bindings/remoteproc/qcom,sm6350-pas.yaml
index f7e40fb..c1a3cc3 100644
--- a/Bindings/remoteproc/qcom,sm6350-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm6350-pas.yaml
@@ -42,7 +42,7 @@
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm6375-pas.yaml b/Bindings/remoteproc/qcom,sm6375-pas.yaml
index 3e4a03e..7286b2b 100644
--- a/Bindings/remoteproc/qcom,sm6375-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm6375-pas.yaml
@@ -36,7 +36,7 @@
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
   smd-edge: false
diff --git a/Bindings/remoteproc/qcom,sm8150-pas.yaml b/Bindings/remoteproc/qcom,sm8150-pas.yaml
index 238c6e5..d67386c 100644
--- a/Bindings/remoteproc/qcom,sm8150-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm8150-pas.yaml
@@ -46,7 +46,7 @@
   smd-edge: false
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm8350-pas.yaml b/Bindings/remoteproc/qcom,sm8350-pas.yaml
index 53cea8e..4b9fb74 100644
--- a/Bindings/remoteproc/qcom,sm8350-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm8350-pas.yaml
@@ -47,7 +47,7 @@
     description: Reference to the reserved-memory for the Hexagon core
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: Firmware name for the Hexagon core
 
 required:
diff --git a/Bindings/remoteproc/qcom,sm8550-pas.yaml b/Bindings/remoteproc/qcom,sm8550-pas.yaml
index 5812082..73fda75 100644
--- a/Bindings/remoteproc/qcom,sm8550-pas.yaml
+++ b/Bindings/remoteproc/qcom,sm8550-pas.yaml
@@ -19,6 +19,11 @@
       - qcom,sm8550-adsp-pas
       - qcom,sm8550-cdsp-pas
       - qcom,sm8550-mpss-pas
+      - qcom,sm8650-adsp-pas
+      - qcom,sm8650-cdsp-pas
+      - qcom,sm8650-mpss-pas
+      - qcom,x1e80100-adsp-pas
+      - qcom,x1e80100-cdsp-pas
 
   reg:
     maxItems: 1
@@ -49,6 +54,8 @@
       - description: Memory region for main Firmware authentication
       - description: Memory region for Devicetree Firmware authentication
       - description: DSM Memory region
+      - description: DSM Memory region 2
+      - description: Memory region for Qlink Logging
 
 required:
   - compatible
@@ -63,6 +70,9 @@
           enum:
             - qcom,sm8550-adsp-pas
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-adsp-pas
+            - qcom,x1e80100-adsp-pas
+            - qcom,x1e80100-cdsp-pas
     then:
       properties:
         interrupts:
@@ -71,7 +81,26 @@
           maxItems: 5
         memory-region:
           maxItems: 2
-    else:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-cdsp-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+        memory-region:
+          minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8550-mpss-pas
+    then:
       properties:
         interrupts:
           minItems: 6
@@ -79,12 +108,29 @@
           minItems: 6
         memory-region:
           minItems: 3
+          maxItems: 3
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-mpss-pas
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+        memory-region:
+          minItems: 5
+          maxItems: 5
 
   - if:
       properties:
         compatible:
           enum:
             - qcom,sm8550-adsp-pas
+            - qcom,sm8650-adsp-pas
+            - qcom,x1e80100-adsp-pas
     then:
       properties:
         power-domains:
@@ -101,6 +147,7 @@
         compatible:
           enum:
             - qcom,sm8550-mpss-pas
+            - qcom,sm8650-mpss-pas
     then:
       properties:
         power-domains:
@@ -116,6 +163,8 @@
         compatible:
           enum:
             - qcom,sm8550-cdsp-pas
+            - qcom,sm8650-cdsp-pas
+            - qcom,x1e80100-cdsp-pas
     then:
       properties:
         power-domains:
diff --git a/Bindings/remoteproc/qcom,wcnss-pil.yaml b/Bindings/remoteproc/qcom,wcnss-pil.yaml
index 45eb42b..8e033b2 100644
--- a/Bindings/remoteproc/qcom,wcnss-pil.yaml
+++ b/Bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -51,7 +51,7 @@
       - const: stop-ack
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Relative firmware image path for the WCNSS core. Defaults to
       "wcnss.mdt".
diff --git a/Bindings/remoteproc/ti,davinci-rproc.txt b/Bindings/remoteproc/ti,davinci-rproc.txt
index 25f8658..48a49c5 100644
--- a/Bindings/remoteproc/ti,davinci-rproc.txt
+++ b/Bindings/remoteproc/ti,davinci-rproc.txt
@@ -1,9 +1,6 @@
 TI Davinci DSP devices
 =======================
 
-Binding status: Unstable - Subject to changes for DT representation of clocks
-			   and resets
-
 The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
 is used to offload some of the processor-intensive tasks or algorithms, for
 achieving various system level goals.
diff --git a/Bindings/reset/mobileye,eyeq5-reset.yaml b/Bindings/reset/mobileye,eyeq5-reset.yaml
new file mode 100644
index 0000000..062b451
--- /dev/null
+++ b/Bindings/reset/mobileye,eyeq5-reset.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/mobileye,eyeq5-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobileye EyeQ5 reset controller
+
+description:
+  The EyeQ5 reset driver handles three reset domains. Its registers live in a
+  shared region called OLB.
+
+maintainers:
+  - Grégory Clement <gregory.clement@bootlin.com>
+  - Théo Lebrun <theo.lebrun@bootlin.com>
+  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
+
+properties:
+  compatible:
+    const: mobileye,eyeq5-reset
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: d0
+      - const: d1
+      - const: d2
+
+  "#reset-cells":
+    const: 2
+    description:
+      The first cell is the domain (0 to 2 inclusive) and the second one is the
+      reset index inside that domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#reset-cells"
+
+additionalProperties: false
diff --git a/Bindings/reset/renesas,rst.yaml b/Bindings/reset/renesas,rst.yaml
index e7e4872..58b4a45 100644
--- a/Bindings/reset/renesas,rst.yaml
+++ b/Bindings/reset/renesas,rst.yaml
@@ -50,6 +50,7 @@
       - renesas,r8a779a0-rst      # R-Car V3U
       - renesas,r8a779f0-rst      # R-Car S4-8
       - renesas,r8a779g0-rst      # R-Car V4H
+      - renesas,r8a779h0-rst      # R-Car V4M
 
   reg:
     maxItems: 1
diff --git a/Bindings/reset/sophgo,sg2042-reset.yaml b/Bindings/reset/sophgo,sg2042-reset.yaml
new file mode 100644
index 0000000..76e1931
--- /dev/null
+++ b/Bindings/reset/sophgo,sg2042-reset.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/sophgo,sg2042-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 SoC Reset Controller
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+properties:
+  compatible:
+    const: sophgo,sg2042-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstgen: reset-controller@c00 {
+        compatible = "sophgo,sg2042-reset";
+        reg = <0xc00 0xc>;
+        #reset-cells = <1>;
+    };
diff --git a/Bindings/riscv/cpus.yaml b/Bindings/riscv/cpus.yaml
index 9d8670c..d87dd50 100644
--- a/Bindings/riscv/cpus.yaml
+++ b/Bindings/riscv/cpus.yaml
@@ -75,6 +75,10 @@
       - riscv,sv57
       - riscv,none
 
+  reg:
+    description:
+      The hart ID of this CPU node.
+
   riscv,cbom-block-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -106,7 +110,11 @@
         const: 1
 
       compatible:
-        const: riscv,cpu-intc
+        oneOf:
+          - items:
+              - const: andestech,cpu-intc
+              - const: riscv,cpu-intc
+          - const: riscv,cpu-intc
 
       interrupt-controller: true
 
diff --git a/Bindings/riscv/extensions.yaml b/Bindings/riscv/extensions.yaml
index 63d81dc..468c646 100644
--- a/Bindings/riscv/extensions.yaml
+++ b/Bindings/riscv/extensions.yaml
@@ -477,5 +477,12 @@
             latency, as ratified in commit 56ed795 ("Update
             riscv-crypto-spec-vector.adoc") of riscv-crypto.
 
+        - const: xandespmu
+          description:
+            The Andes Technology performance monitor extension for counter overflow
+            and privilege mode filtering. For more details, see Counter Related
+            Registers in the AX45MP datasheet.
+            https://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
+
 additionalProperties: true
 ...
diff --git a/Bindings/rng/atmel,at91-trng.yaml b/Bindings/rng/atmel,at91-trng.yaml
index 3ce4545..b38f825 100644
--- a/Bindings/rng/atmel,at91-trng.yaml
+++ b/Bindings/rng/atmel,at91-trng.yaml
@@ -21,6 +21,10 @@
           - enum:
               - microchip,sama7g5-trng
           - const: atmel,at91sam9g45-trng
+      - items:
+          - enum:
+              - microchip,sam9x7-trng
+          - const: microchip,sam9x60-trng
 
   clocks:
     maxItems: 1
diff --git a/Bindings/rtc/abracon,abx80x.txt b/Bindings/rtc/abracon,abx80x.txt
deleted file mode 100644
index 2405e35..0000000
--- a/Bindings/rtc/abracon,abx80x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
-        "abracon,abx80x"
-        "abracon,ab0801"
-        "abracon,ab0803"
-        "abracon,ab0804"
-        "abracon,ab0805"
-        "abracon,ab1801"
-        "abracon,ab1803"
-        "abracon,ab1804"
-        "abracon,ab1805"
-        "microcrystal,rv1805"
-	Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
-                          resistor, the other values are in kOhm.
diff --git a/Bindings/rtc/abracon,abx80x.yaml b/Bindings/rtc/abracon,abx80x.yaml
new file mode 100644
index 0000000..355b059
--- /dev/null
+++ b/Bindings/rtc/abracon,abx80x.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+maintainers:
+  - linux-rtc@vger.kernel.org
+
+properties:
+  compatible:
+    description:
+      The wildcard 'abracon,abx80x' may be used to support a mix
+      of different abracon rtc`s. In this case the driver
+      must perform auto-detection from ID register.
+    enum:
+      - abracon,abx80x
+      - abracon,ab0801
+      - abracon,ab0803
+      - abracon,ab0804
+      - abracon,ab0805
+      - abracon,ab1801
+      - abracon,ab1803
+      - abracon,ab1804
+      - abracon,ab1805
+      - microcrystal,rv1805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  abracon,tc-diode:
+    description:
+      Trickle-charge diode type.
+      Required to enable charging backup battery.
+
+      Supported are 'standard' diodes with a 0.6V drop
+      and 'schottky' diodes with a 0.3V drop.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - standard
+      - schottky
+
+  abracon,tc-resistor:
+    description:
+      Trickle-charge resistor value in kOhm.
+      Required to enable charging backup battery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 3, 6, 11]
+
+dependentRequired:
+  abracon,tc-diode: ["abracon,tc-resistor"]
+  abracon,tc-resistor: ["abracon,tc-diode"]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - abracon,abx80x
+                - abracon,ab0804
+                - abracon,ab1804
+                - abracon,ab0805
+                - abracon,ab1805
+    then:
+      properties:
+        abracon,tc-diode: false
+        abracon,tc-resistor: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@69 {
+            compatible = "abracon,abx80x";
+            reg = <0x69>;
+            abracon,tc-diode = "schottky";
+            abracon,tc-resistor = <3>;
+            interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Bindings/rtc/atmel,at91sam9260-rtt.yaml b/Bindings/rtc/atmel,at91sam9260-rtt.yaml
index b80b85c..a7f6c1d 100644
--- a/Bindings/rtc/atmel,at91sam9260-rtt.yaml
+++ b/Bindings/rtc/atmel,at91sam9260-rtt.yaml
@@ -19,7 +19,9 @@
       - items:
           - const: atmel,at91sam9260-rtt
       - items:
-          - const: microchip,sam9x60-rtt
+          - enum:
+              - microchip,sam9x60-rtt
+              - microchip,sam9x7-rtt
           - const: atmel,at91sam9260-rtt
       - items:
           - const: microchip,sama7g5-rtt
diff --git a/Bindings/rtc/mediatek,mt2712-rtc.yaml b/Bindings/rtc/mediatek,mt2712-rtc.yaml
new file mode 100644
index 0000000..75624dd
--- /dev/null
+++ b/Bindings/rtc/mediatek,mt2712-rtc.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT2712 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Ran Bi <ran.bi@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt2712-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10011000 {
+        compatible = "mediatek,mt2712-rtc";
+        reg = <0x10011000 0x1000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Bindings/rtc/mediatek,mt7622-rtc.yaml b/Bindings/rtc/mediatek,mt7622-rtc.yaml
new file mode 100644
index 0000000..e74dfc1
--- /dev/null
+++ b/Bindings/rtc/mediatek,mt7622-rtc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt7622-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7622 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7622-rtc
+      - const: mediatek,soc-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10212800 {
+        compatible = "mediatek,mt7622-rtc", "mediatek,soc-rtc";
+        reg = <0x10212800 0x200>;
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RTC>;
+        clock-names = "rtc";
+    };
diff --git a/Bindings/rtc/rtc-mt2712.txt b/Bindings/rtc/rtc-mt2712.txt
deleted file mode 100644
index c33d87e..0000000
--- a/Bindings/rtc/rtc-mt2712.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-
-Example:
-
-rtc: rtc@10011000 {
-	compatible = "mediatek,mt2712-rtc";
-	reg = <0 0x10011000 0 0x1000>;
-	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
-};
diff --git a/Bindings/rtc/rtc-mt7622.txt b/Bindings/rtc/rtc-mt7622.txt
deleted file mode 100644
index 09fe8f5..0000000
--- a/Bindings/rtc/rtc-mt7622.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be
-			"mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-- clocks	    : Specifies list of clock specifiers, corresponding to
-		      entries in clock-names property;
-- clock-names	    : Should contain "rtc" entries
-
-Example:
-
-rtc: rtc@10212800 {
-	compatible = "mediatek,mt7622-rtc",
-		     "mediatek,soc-rtc";
-	reg = <0 0x10212800 0 0x200>;
-	interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&topckgen CLK_TOP_RTC>;
-	clock-names = "rtc";
-};
diff --git a/Bindings/rtc/sa1100-rtc.yaml b/Bindings/rtc/sa1100-rtc.yaml
index a16c355..fcf52d2 100644
--- a/Bindings/rtc/sa1100-rtc.yaml
+++ b/Bindings/rtc/sa1100-rtc.yaml
@@ -12,7 +12,7 @@
 maintainers:
   - Alessandro Zummo <a.zummo@towertech.it>
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   compatible:
diff --git a/Bindings/rtc/xlnx,zynqmp-rtc.yaml b/Bindings/rtc/xlnx,zynqmp-rtc.yaml
index d1f5eb9..01cc90f 100644
--- a/Bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ b/Bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -18,7 +18,13 @@
 
 properties:
   compatible:
-    const: xlnx,zynqmp-rtc
+    oneOf:
+      - const: xlnx,zynqmp-rtc
+      - items:
+          - enum:
+              - xlnx,versal-rtc
+              - xlnx,versal-net-rtc
+          - const: xlnx,zynqmp-rtc
 
   reg:
     maxItems: 1
@@ -48,6 +54,9 @@
     default: 0x198233
     deprecated: true
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Bindings/serial/atmel,at91-usart.yaml b/Bindings/serial/atmel,at91-usart.yaml
index 65cb2e5..eb2992a 100644
--- a/Bindings/serial/atmel,at91-usart.yaml
+++ b/Bindings/serial/atmel,at91-usart.yaml
@@ -8,7 +8,7 @@
 title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
 maintainers:
-  - Richard Genoud <richard.genoud@gmail.com>
+  - Richard Genoud <richard.genoud@bootlin.com>
 
 properties:
   compatible:
diff --git a/Bindings/serial/cdns,uart.yaml b/Bindings/serial/cdns,uart.yaml
index e35ad11..2129247 100644
--- a/Bindings/serial/cdns,uart.yaml
+++ b/Bindings/serial/cdns,uart.yaml
@@ -55,6 +55,7 @@
 
 allOf:
   - $ref: serial.yaml#
+  - $ref: rs485.yaml#
   - if:
       properties:
         compatible:
diff --git a/Bindings/serial/fsl-lpuart.yaml b/Bindings/serial/fsl-lpuart.yaml
index 3a5b59f..3f9ace8 100644
--- a/Bindings/serial/fsl-lpuart.yaml
+++ b/Bindings/serial/fsl-lpuart.yaml
@@ -30,6 +30,7 @@
       - items:
           - enum:
               - fsl,imx93-lpuart
+              - fsl,imx95-lpuart
           - const: fsl,imx8ulp-lpuart
           - const: fsl,imx7ulp-lpuart
       - items:
diff --git a/Bindings/serial/renesas,hscif.yaml b/Bindings/serial/renesas,hscif.yaml
index 2046e2d..9480ed3 100644
--- a/Bindings/serial/renesas,hscif.yaml
+++ b/Bindings/serial/renesas,hscif.yaml
@@ -59,6 +59,7 @@
               - renesas,hscif-r8a779a0     # R-Car V3U
               - renesas,hscif-r8a779f0     # R-Car S4-8
               - renesas,hscif-r8a779g0     # R-Car V4H
+              - renesas,hscif-r8a779h0     # R-Car V4M
           - const: renesas,rcar-gen4-hscif # R-Car Gen4
           - const: renesas,hscif           # generic HSCIF compatible UART
 
diff --git a/Bindings/serial/samsung_uart.yaml b/Bindings/serial/samsung_uart.yaml
index 133259e..0f01310 100644
--- a/Bindings/serial/samsung_uart.yaml
+++ b/Bindings/serial/samsung_uart.yaml
@@ -143,6 +143,8 @@
     then:
       required:
         - samsung,uart-fifosize
+      properties:
+        reg-io-width: false
 
 unevaluatedProperties: false
 
diff --git a/Bindings/serial/serial.yaml b/Bindings/serial/serial.yaml
index 65804ca..ffc9198 100644
--- a/Bindings/serial/serial.yaml
+++ b/Bindings/serial/serial.yaml
@@ -88,7 +88,7 @@
       TX FIFO threshold configuration (in bytes).
 
 patternProperties:
-  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$":
+  "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$":
     if:
       type: object
     then:
diff --git a/Bindings/serial/st,asc.yaml b/Bindings/serial/st,asc.yaml
new file mode 100644
index 0000000..f208338
--- /dev/null
+++ b/Bindings/serial/st,asc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,asc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SoCs Serial Port
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: st,asc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  st,hw-flow-ctrl:
+    description: When set, enable hardware flow control.
+    type: boolean
+
+  st,force-m1:
+    description: When set, force asc to be in Mode-1. This is recommended for
+      high bit rates above 19.2K.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stih407-clks.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    serial@9830000 {
+        compatible = "st,asc";
+        reg = <0x9830000 0x2c>;
+        interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+    };
+...
diff --git a/Bindings/serial/st,stm32-uart.yaml b/Bindings/serial/st,stm32-uart.yaml
index 1df8ffe..62f97da 100644
--- a/Bindings/serial/st,stm32-uart.yaml
+++ b/Bindings/serial/st,stm32-uart.yaml
@@ -58,6 +58,9 @@
 
   wakeup-source: true
 
+  power-domains:
+    maxItems: 1
+
   rx-threshold:
     description:
       If value is set to 1, RX FIFO threshold is disabled.
diff --git a/Bindings/serial/st-asc.txt b/Bindings/serial/st-asc.txt
deleted file mode 100644
index a1b9b6f..0000000
--- a/Bindings/serial/st-asc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-*st-asc(Serial Port)
-
-Required properties:
-- compatible : Should be "st,asc".
-- reg, reg-names, interrupts, interrupt-names	: Standard way to define device
-			resources with names. look in
-			Documentation/devicetree/bindings/resource-names.txt
-
-Optional properties:
-- st,hw-flow-ctrl	bool flag to enable hardware flow control.
-- st,force-m1		bool flat to force asc to be in Mode-1 recommended
-			for high bit rates (above 19.2K)
-Example:
-serial@fe440000{
-    compatible    = "st,asc";
-    reg         = <0xfe440000 0x2c>;
-    interrupts     =  <0 209 0>;
-};
diff --git a/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
index 397f759..ce1a650 100644
--- a/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
+++ b/Bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -51,7 +51,7 @@
   ranges: true
 
 patternProperties:
-  "^clock-controller@[0-9a-z]+$":
+  "^clock-controller@[0-9a-f]+$":
     $ref: /schemas/clock/fsl,flexspi-clock.yaml#
 
 required:
diff --git a/Bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
index 8d088b5..a6a511b 100644
--- a/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
+++ b/Bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -41,7 +41,7 @@
   ranges: true
 
 patternProperties:
-  "^interrupt-controller@[a-z0-9]+$":
+  "^interrupt-controller@[a-f0-9]+$":
     $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
 
 required:
diff --git a/Bindings/soc/imx/fsl,imx-anatop.yaml b/Bindings/soc/imx/fsl,imx-anatop.yaml
new file mode 100644
index 0000000..c4ae4f2
--- /dev/null
+++ b/Bindings/soc/imx/fsl,imx-anatop.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ANATOP register
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sl-anatop
+              - fsl,imx6sll-anatop
+              - fsl,imx6sx-anatop
+              - fsl,imx6ul-anatop
+              - fsl,imx7d-anatop
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: fsl,imx6q-anatop
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Temperature sensor event
+      - description: Brown-out event on either of the support regulators
+      - description: Brown-out event on either the core, gpu or soc regulators
+
+  tempmon:
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/thermal/imx-thermal.yaml
+
+patternProperties:
+  "regulator-((1p1)|(2p5)|(3p0)|(vddcore)|(vddpu)|(vddsoc))$":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/anatop-regulator.yaml
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    anatop: anatop@20c8000 {
+        compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+                     "syscon", "simple-mfd";
+        reg = <0x020c8000 0x1000>;
+        interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+        reg_3p0: regulator-3p0 {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vdd3p0";
+            regulator-min-microvolt = <2625000>;
+            regulator-max-microvolt = <3400000>;
+            anatop-reg-offset = <0x120>;
+            anatop-vol-bit-shift = <8>;
+            anatop-vol-bit-width = <5>;
+            anatop-min-bit-val = <0>;
+            anatop-min-voltage = <2625000>;
+            anatop-max-voltage = <3400000>;
+            anatop-enable-bit = <0>;
+        };
+
+        reg_arm: regulator-vddcore {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "cpu";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <0>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <24>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        reg_soc: regulator-vddsoc {
+            compatible = "fsl,anatop-regulator";
+            regulator-name = "vddsoc";
+            regulator-min-microvolt = <725000>;
+            regulator-max-microvolt = <1450000>;
+            regulator-always-on;
+            anatop-reg-offset = <0x140>;
+            anatop-vol-bit-shift = <18>;
+            anatop-vol-bit-width = <5>;
+            anatop-delay-reg-offset = <0x170>;
+            anatop-delay-bit-shift = <28>;
+            anatop-delay-bit-width = <2>;
+            anatop-min-bit-val = <1>;
+            anatop-min-voltage = <725000>;
+            anatop-max-voltage = <1450000>;
+        };
+
+        tempmon: tempmon {
+            compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+            interrupt-parent = <&gpc>;
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,tempmon = <&anatop>;
+            nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+            nvmem-cell-names = "calib", "temp_grade";
+            clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
index 1da1b75..8451cb4 100644
--- a/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
+++ b/Bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml
@@ -17,7 +17,23 @@
   compatible:
     oneOf:
       - items:
-          - const: fsl,imx8mq-iomuxc-gpr
+          - enum:
+              - fsl,imx6q-iomuxc-gpr
+              - fsl,imx8mq-iomuxc-gpr
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - fsl,imx6sl-iomuxc-gpr
+              - fsl,imx6sll-iomuxc-gpr
+              - fsl,imx6ul-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
+          - const: syscon
+      - items:
+          - enum:
+              - fsl,imx6sx-iomuxc-gpr
+              - fsl,imx7d-iomuxc-gpr
+          - const: fsl,imx6q-iomuxc-gpr
           - const: syscon
           - const: simple-mfd
       - items:
diff --git a/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
index 1be4ce2..bd1cdaa 100644
--- a/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
+++ b/Bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
@@ -27,8 +27,8 @@
     const: 1
 
   power-domains:
-    minItems: 8
-    maxItems: 8
+    minItems: 10
+    maxItems: 10
 
   power-domain-names:
     items:
@@ -40,10 +40,12 @@
       - const: trng
       - const: hdmi-tx
       - const: hdmi-tx-phy
+      - const: hdcp
+      - const: hrv
 
   clocks:
-    minItems: 4
-    maxItems: 4
+    minItems: 5
+    maxItems: 5
 
   clock-names:
     items:
@@ -51,6 +53,7 @@
       - const: axi
       - const: ref_266m
       - const: ref_24m
+      - const: fdcc
 
   interconnects:
     maxItems: 3
@@ -82,12 +85,15 @@
         clocks = <&clk IMX8MP_CLK_HDMI_APB>,
                  <&clk IMX8MP_CLK_HDMI_ROOT>,
                  <&clk IMX8MP_CLK_HDMI_REF_266M>,
-                 <&clk IMX8MP_CLK_HDMI_24M>;
-        clock-names = "apb", "axi", "ref_266m", "ref_24m";
+                 <&clk IMX8MP_CLK_HDMI_24M>,
+                 <&clk IMX8MP_CLK_HDMI_FDCC_TST>;
+        clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc";
         power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
                         <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
-                        <&pgc_hdmimix>, <&pgc_hdmi_phy>;
+                        <&pgc_hdmimix>, <&pgc_hdmi_phy>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>;
         power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
-                             "hdmi-tx", "hdmi-tx-phy";
+                             "hdmi-tx", "hdmi-tx-phy",
+                             "hdcp", "hrv";
         #power-domain-cells = <1>;
     };
diff --git a/Bindings/soc/qcom/qcom,pbs.yaml b/Bindings/soc/qcom/qcom,pbs.yaml
new file mode 100644
index 0000000..b502ca7
--- /dev/null
+++ b/Bindings/soc/qcom/qcom,pbs.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,pbs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Programmable Boot Sequencer
+
+maintainers:
+  - Anjelique Melendez <quic_amelende@quicinc.com>
+
+description: |
+  The Qualcomm Technologies, Inc. Programmable Boot Sequencer (PBS)
+  supports triggering power up and power down sequences for clients
+  upon request.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pmi632-pbs
+      - const: qcom,pbs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+      reg = <0x0 SPMI_USID>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pbs@7400 {
+        compatible = "qcom,pmi632-pbs", "qcom,pbs";
+        reg = <0x7400>;
+      };
+    };
diff --git a/Bindings/soc/qcom/qcom,pmic-glink.yaml b/Bindings/soc/qcom/qcom,pmic-glink.yaml
index 61df97f..4310bae 100644
--- a/Bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -23,6 +23,7 @@
     oneOf:
       - items:
           - enum:
+              - qcom,qcm6490-pmic-glink
               - qcom,sc8180x-pmic-glink
               - qcom,sc8280xp-pmic-glink
               - qcom,sm8350-pmic-glink
@@ -32,6 +33,7 @@
       - items:
           - enum:
               - qcom,sm8650-pmic-glink
+              - qcom,x1e80100-pmic-glink
           - const: qcom,sm8550-pmic-glink
           - const: qcom,pmic-glink
 
@@ -65,6 +67,7 @@
               enum:
                 - qcom,sm8450-pmic-glink
                 - qcom,sm8550-pmic-glink
+                - qcom,x1e80100-pmic-glink
     then:
       properties:
         orientation-gpios: false
diff --git a/Bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
index 0318009..9410404 100644
--- a/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
+++ b/Bindings/soc/qcom/qcom,rpm-master-stats.yaml
@@ -35,6 +35,8 @@
     description: Phandle to an RPM MSG RAM slice containing the master stats
     minItems: 1
     maxItems: 5
+    items:
+      maxItems: 1
 
   qcom,master-names:
     $ref: /schemas/types.yaml#/definitions/string-array
diff --git a/Bindings/soc/qcom/qcom,saw2.yaml b/Bindings/soc/qcom/qcom,saw2.yaml
new file mode 100644
index 0000000..ca4bce8
--- /dev/null
+++ b/Bindings/soc/qcom/qcom,saw2.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,saw2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Subsystem Power Manager / SPM AVS Wrapper 2 (SAW2)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  The Qualcomm Subsystem Power Manager is used to control the peripheral logic
+  surrounding the application cores in Qualcomm platforms.
+
+  The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+  Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+  power-controller that transitions a piece of hardware (like a processor or
+  subsystem) into and out of low power modes via a direct connection to
+  the PMIC. It can also be wired up to interact with other processors in the
+  system, notifying them when a low power state is entered or exited.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,ipq4019-saw2-cpu
+          - qcom,ipq4019-saw2-l2
+          - qcom,ipq8064-saw2-cpu
+          - qcom,sdm660-gold-saw2-v4.1-l2
+          - qcom,sdm660-silver-saw2-v4.1-l2
+          - qcom,msm8998-gold-saw2-v4.1-l2
+          - qcom,msm8998-silver-saw2-v4.1-l2
+          - qcom,msm8909-saw2-v3.0-cpu
+          - qcom,msm8916-saw2-v3.0-cpu
+          - qcom,msm8939-saw2-v3.0-cpu
+          - qcom,msm8226-saw2-v2.1-cpu
+          - qcom,msm8226-saw2-v2.1-l2
+          - qcom,msm8960-saw2-cpu
+          - qcom,msm8974-saw2-v2.1-cpu
+          - qcom,msm8974-saw2-v2.1-l2
+          - qcom,msm8976-gold-saw2-v2.3-l2
+          - qcom,msm8976-silver-saw2-v2.3-l2
+          - qcom,apq8084-saw2-v2.1-cpu
+          - qcom,apq8084-saw2-v2.1-l2
+          - qcom,apq8064-saw2-v1.1-cpu
+      - const: qcom,saw2
+
+  reg:
+    items:
+      - description: Base address and size of the SPM register region
+      - description: Base address and size of the alias register region
+    minItems: 1
+
+  regulator:
+    $ref: /schemas/regulator/regulator.yaml#
+    description: Indicates that this SPM device acts as a regulator device
+      device for the core (CPU or Cache) the SPM is attached to.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,kryo";
+            device_type = "cpu";
+            enable-method = "qcom,kpss-acc-v2";
+            qcom,saw = <&saw0>;
+            reg = <0x0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    saw0: power-manager@f9089000 {
+        compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
+        reg = <0xf9089000 0x1000>;
+    };
+
+  - |
+
+    /*
+     * Example 2: New-gen multi cluster SoC using SAW only for L2;
+     * This does not require any cpuidle driver, nor any cpu phandle.
+     */
+    power-manager@17812000 {
+        compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17812000 0x1000>;
+    };
+
+    power-manager@17912000 {
+        compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2";
+        reg = <0x17912000 0x1000>;
+    };
+
+  - |
+    /*
+     * Example 3: SAW2 with the bundled regulator definition.
+     */
+    power-manager@2089000 {
+        compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
+        reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+
+        regulator {
+            regulator-min-microvolt = <850000>;
+            regulator-max-microvolt = <1300000>;
+        };
+    };
+...
diff --git a/Bindings/soc/qcom/qcom,spm.yaml b/Bindings/soc/qcom/qcom,spm.yaml
deleted file mode 100644
index 20c8cd3..0000000
--- a/Bindings/soc/qcom/qcom,spm.yaml
+++ /dev/null
@@ -1,85 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Subsystem Power Manager
-
-maintainers:
-  - Andy Gross <agross@kernel.org>
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-
-description: |
-  This binding describes the Qualcomm Subsystem Power Manager, used to control
-  the peripheral logic surrounding the application cores in Qualcomm platforms.
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - qcom,sdm660-gold-saw2-v4.1-l2
-          - qcom,sdm660-silver-saw2-v4.1-l2
-          - qcom,msm8998-gold-saw2-v4.1-l2
-          - qcom,msm8998-silver-saw2-v4.1-l2
-          - qcom,msm8909-saw2-v3.0-cpu
-          - qcom,msm8916-saw2-v3.0-cpu
-          - qcom,msm8939-saw2-v3.0-cpu
-          - qcom,msm8226-saw2-v2.1-cpu
-          - qcom,msm8974-saw2-v2.1-cpu
-          - qcom,msm8976-gold-saw2-v2.3-l2
-          - qcom,msm8976-silver-saw2-v2.3-l2
-          - qcom,apq8084-saw2-v2.1-cpu
-          - qcom,apq8064-saw2-v1.1-cpu
-      - const: qcom,saw2
-
-  reg:
-    description: Base address and size of the SPM register region
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-
-    /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */
-    cpus {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        cpu@0 {
-            compatible = "qcom,kryo";
-            device_type = "cpu";
-            enable-method = "qcom,kpss-acc-v2";
-            qcom,saw = <&saw0>;
-            reg = <0x0>;
-            operating-points-v2 = <&cpu_opp_table>;
-        };
-    };
-
-    saw0: power-manager@f9089000 {
-        compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
-        reg = <0xf9089000 0x1000>;
-    };
-
-  - |
-
-    /*
-     * Example 2: New-gen multi cluster SoC using SAW only for L2;
-     * This does not require any cpuidle driver, nor any cpu phandle.
-     */
-    power-manager@17812000 {
-        compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2";
-        reg = <0x17812000 0x1000>;
-    };
-
-    power-manager@17912000 {
-        compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2";
-        reg = <0x17912000 0x1000>;
-    };
-
-...
diff --git a/Bindings/soc/renesas/renesas-soc.yaml b/Bindings/soc/renesas/renesas-soc.yaml
new file mode 100644
index 0000000..5ddd31f
--- /dev/null
+++ b/Bindings/soc/renesas/renesas-soc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/renesas/renesas-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SoC compatibles naming convention
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    renesas,SoC-IP
+
+  For example::
+   renesas,r8a77965-csi2
+
+  When adding new compatibles to existing bindings, use the format in the
+  existing binding, even if it contradicts the above.
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: "^renesas,.+-.+$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    minItems: 1
+    maxItems: 4
+    items:
+      anyOf:
+        # Preferred naming style for compatibles of SoC components
+        - pattern: "^renesas,(emev2|r(7s|8a|9a)[a-z0-9]+|rcar|rmobile|rz[a-z0-9]*|sh(7[a-z0-9]+)?|mobile)-[a-z0-9-]+$"
+        - pattern: "^renesas,(condor|falcon|gr-peach|gray-hawk|salvator|sk-rz|smar(c(2)?)?|spider|white-hawk)(.*)?$"
+
+        # Legacy compatibles
+        #
+        # New compatibles are not allowed.
+        - pattern: "^renesas,(can|cpg|dmac|du|(g)?ether(avb)?|gpio|hscif|(r)?i[i2]c|imr|intc|ipmmu|irqc|jpu|mmcif|msiof|mtu2|pci(e)?|pfc|pwm|[rq]spi|rcar_sound|sata|scif[ab]*|sdhi|thermal|tmu|tpu|usb(2|hs)?|vin|xhci)-[a-z0-9-]+$"
+        - pattern: "^renesas,(d|s)?bsc(3)?-(r8a73a4|r8a7740|sh73a0)$"
+        - pattern: "^renesas,em-(gio|sti|uart)$"
+        - pattern: "^renesas,fsi2-(r8a7740|sh73a0)$"
+        - pattern: "^renesas,hspi-r8a777[89]$"
+        - pattern: "^renesas,sysc-(r8a73a4|r8a7740|rmobile|sh73a0)$"
+        - enum:
+            - renesas,imr-lx4
+            - renesas,mtu2-r7s72100
+
+        # None SoC component compatibles
+        #
+        # Compatibles with the Renesas vendor prefix that do not relate to any SoC
+        # component are OK. New compatibles are allowed.
+        - enum:
+            - renesas,smp-sram
+
+        # Do not fail compatibles not matching the select pattern
+        #
+        # Some SoC components in addition to a Renesas compatible list
+        # compatibles not related to Renesas. The select pattern for this
+        # schema hits all compatibles that have at lest one Renesas compatible
+        # and try to validate all values in that compatible array, allow all
+        # that don't match the schema select pattern. For example,
+        #
+        #   compatible = "renesas,r9a07g044-mali", "arm,mali-bifrost";
+        - pattern: "^(?!renesas,.+-.+).+$"
+
+additionalProperties: true
diff --git a/Bindings/soc/renesas/renesas.yaml b/Bindings/soc/renesas/renesas.yaml
index 16ca3ff..c1ce4da 100644
--- a/Bindings/soc/renesas/renesas.yaml
+++ b/Bindings/soc/renesas/renesas.yaml
@@ -348,12 +348,25 @@
               - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
           - const: renesas,r8a779g0
 
+      - description: R-Car V4H (R8A779G2)
+        items:
+          - enum:
+              - renesas,white-hawk-single # White Hawk Single board (RTP8A779G2ASKB0F10SA001)
+          - const: renesas,r8a779g2
+          - const: renesas,r8a779g0
+
       - items:
           - enum:
               - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
           - const: renesas,white-hawk-cpu
           - const: renesas,r8a779g0
 
+      - description: R-Car V4M (R8A779H0)
+        items:
+          - enum:
+              - renesas,gray-hawk-single # Gray Hawk Single board (RTP8A779H0ASKB0F10S)
+          - const: renesas,r8a779h0
+
       - description: R-Car H3e (R8A779M0)
         items:
           - enum:
@@ -475,12 +488,6 @@
               - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
           - const: renesas,r9a07g054
 
-      - description: RZ/V2M (R9A09G011)
-        items:
-          - enum:
-              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
-          - const: renesas,r9a09g011
-
       - description: RZ/G3S (R9A08G045)
         items:
           - enum:
@@ -500,6 +507,12 @@
           - const: renesas,r9a08g045s33 # PCIe support
           - const: renesas,r9a08g045
 
+      - description: RZ/V2M (R9A09G011)
+        items:
+          - enum:
+              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
+          - const: renesas,r9a09g011
+
 additionalProperties: true
 
 ...
diff --git a/Bindings/soc/rockchip/grf.yaml b/Bindings/soc/rockchip/grf.yaml
index 9793ea6..79798c7 100644
--- a/Bindings/soc/rockchip/grf.yaml
+++ b/Bindings/soc/rockchip/grf.yaml
@@ -22,12 +22,15 @@
               - rockchip,rk3568-usb2phy-grf
               - rockchip,rk3588-bigcore0-grf
               - rockchip,rk3588-bigcore1-grf
+              - rockchip,rk3588-hdptxphy-grf
               - rockchip,rk3588-ioc
               - rockchip,rk3588-php-grf
               - rockchip,rk3588-pipe-phy-grf
               - rockchip,rk3588-sys-grf
               - rockchip,rk3588-pcie3-phy-grf
               - rockchip,rk3588-pcie3-pipe-grf
+              - rockchip,rk3588-usb-grf
+              - rockchip,rk3588-usbdpphy-grf
               - rockchip,rk3588-vo-grf
               - rockchip,rk3588-vop-grf
               - rockchip,rv1108-usbgrf
@@ -66,6 +69,9 @@
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -165,6 +171,7 @@
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 
@@ -248,6 +255,22 @@
 
           unevaluatedProperties: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-vo-grf
+
+    then:
+      required:
+        - clocks
+
+    else:
+      properties:
+        clocks: false
+
+
 examples:
   - |
     #include <dt-bindings/clock/rk3399-cru.h>
diff --git a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
index 1794e37..c0c6ce8 100644
--- a/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
+++ b/Bindings/soc/samsung/samsung,exynos-sysreg.yaml
@@ -72,6 +72,8 @@
         compatible:
           contains:
             enum:
+              - google,gs101-peric0-sysreg
+              - google,gs101-peric1-sysreg
               - samsung,exynos850-cmgp-sysreg
               - samsung,exynos850-peri-sysreg
               - samsung,exynos850-sysreg
diff --git a/Bindings/soc/xilinx/xilinx.yaml b/Bindings/soc/xilinx/xilinx.yaml
index d4c0fe1..131aba5 100644
--- a/Bindings/soc/xilinx/xilinx.yaml
+++ b/Bindings/soc/xilinx/xilinx.yaml
@@ -117,20 +117,70 @@
           - const: xlnx,zynqmp
 
       - description: Xilinx Kria SOMs
+        minItems: 3
         items:
-          - const: xlnx,zynqmp-sm-k26-rev1
-          - const: xlnx,zynqmp-sm-k26-revB
-          - const: xlnx,zynqmp-sm-k26-revA
-          - const: xlnx,zynqmp-sm-k26
-          - const: xlnx,zynqmp
+          enum:
+            - xlnx,zynqmp-sm-k26-rev2
+            - xlnx,zynqmp-sm-k26-rev1
+            - xlnx,zynqmp-sm-k26-revB
+            - xlnx,zynqmp-sm-k26-revA
+            - xlnx,zynqmp-sm-k26
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp
+          - contains:
+              const: xlnx,zynqmp-sm-k26
 
       - description: Xilinx Kria SOMs (starter)
+        minItems: 3
         items:
-          - const: xlnx,zynqmp-smk-k26-rev1
-          - const: xlnx,zynqmp-smk-k26-revB
-          - const: xlnx,zynqmp-smk-k26-revA
-          - const: xlnx,zynqmp-smk-k26
-          - const: xlnx,zynqmp
+          enum:
+            - xlnx,zynqmp-smk-k26-rev2
+            - xlnx,zynqmp-smk-k26-rev1
+            - xlnx,zynqmp-smk-k26-revB
+            - xlnx,zynqmp-smk-k26-revA
+            - xlnx,zynqmp-smk-k26
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp
+          - contains:
+              const: xlnx,zynqmp-smk-k26
+
+      - description: Xilinx Kria SOM KV260 revA/Y/Z
+        minItems: 3
+        items:
+          enum:
+            - xlnx,zynqmp-sk-kv260-revA
+            - xlnx,zynqmp-sk-kv260-revY
+            - xlnx,zynqmp-sk-kv260-revZ
+            - xlnx,zynqmp-sk-kv260
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp-sk-kv260-revA
+          - contains:
+              const: xlnx,zynqmp-sk-kv260
+          - contains:
+              const: xlnx,zynqmp
+
+      - description: Xilinx Kria SOM KV260 rev2/1/B
+        minItems: 3
+        items:
+          enum:
+            - xlnx,zynqmp-sk-kv260-rev2
+            - xlnx,zynqmp-sk-kv260-rev1
+            - xlnx,zynqmp-sk-kv260-revB
+            - xlnx,zynqmp-sk-kv260
+            - xlnx,zynqmp
+        allOf:
+          - contains:
+              const: xlnx,zynqmp-sk-kv260-revB
+          - contains:
+              const: xlnx,zynqmp-sk-kv260
+          - contains:
+              const: xlnx,zynqmp
 
       - description: AMD MicroBlaze V (QEMU)
         items:
diff --git a/Bindings/sound/atmel,asoc-wm8904.yaml b/Bindings/sound/atmel,asoc-wm8904.yaml
new file mode 100644
index 0000000..89a67f8
--- /dev/null
+++ b/Bindings/sound/atmel,asoc-wm8904.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,asoc-wm8904.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel wm8904 audio codec complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The ASoC audio complex configuration for Atmel with WM8904 audio codec.
+
+properties:
+  compatible:
+    const: atmel,asoc-wm8904
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+        - Mic
+        # WM8904 CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - MICBIAS
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,audio-routing
+  - atmel,ssc-controller
+  - atmel,audio-codec
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,asoc-wm8904";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+        atmel,model = "wm8904 @ AT91SAM9N12EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "HPOUTL",
+                "Headphone Jack", "HPOUTR",
+                "IN2L", "Line In Jack",
+                "IN2R", "Line In Jack",
+                "Mic", "MICBIAS",
+                "IN1L", "Mic";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8904>;
+    };
diff --git a/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml b/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml
new file mode 100644
index 0000000..33717b7
--- /dev/null
+++ b/Bindings/sound/atmel,sam9x5-wm8731-audio.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sam9x5-wm8731-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel at91sam9x5ek wm8731 audio complex
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The audio complex configuration for Atmel at91sam9x5ek with WM8731 audio codec.
+
+properties:
+  compatible:
+    const: atmel,sam9x5-wm8731-audio
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  atmel,ssc-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the SSC controller.
+
+  atmel,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the WM8731 audio codec.
+
+  atmel,audio-routing:
+    description:
+      A list of the connections between audio components. Each entry is a pair
+      of strings, the first being the connection's sink, the second being the
+      connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum:
+        # Board Connectors
+        - Headphone Jack
+        - Line In Jack
+
+        # CODEC Pins
+        - LOUT
+        - ROUT
+        - LHPOUT
+        - RHPOUT
+        - LLINEIN
+        - RLINEIN
+        - MICIN
+
+required:
+  - compatible
+  - atmel,model
+  - atmel,ssc-controller
+  - atmel,audio-codec
+  - atmel,audio-routing
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "atmel,sam9x5-wm8731-audio";
+
+        atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+        atmel,audio-routing =
+                "Headphone Jack", "RHPOUT",
+                "Headphone Jack", "LHPOUT",
+                "LLINEIN", "Line In Jack",
+                "RLINEIN", "Line In Jack";
+
+        atmel,ssc-controller = <&ssc0>;
+        atmel,audio-codec = <&wm8731>;
+    };
diff --git a/Bindings/sound/atmel,sama5d2-classd.yaml b/Bindings/sound/atmel,sama5d2-classd.yaml
index 43d0470..ae3162f 100644
--- a/Bindings/sound/atmel,sama5d2-classd.yaml
+++ b/Bindings/sound/atmel,sama5d2-classd.yaml
@@ -18,7 +18,12 @@
 
 properties:
   compatible:
-    const: atmel,sama5d2-classd
+    oneOf:
+      - items:
+          - const: atmel,sama5d2-classd
+      - items:
+          - const: microchip,sam9x7-classd
+          - const: atmel,sama5d2-classd
 
   reg:
     maxItems: 1
diff --git a/Bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Bindings/sound/atmel-sam9x5-wm8731-audio.txt
deleted file mode 100644
index 8facbce..0000000
--- a/Bindings/sound/atmel-sam9x5-wm8731-audio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Atmel at91sam9x5ek wm8731 audio complex
-
-Required properties:
-  - compatible: "atmel,sam9x5-wm8731-audio"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8731 audio codec
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source.
-
-Available audio endpoints for the audio-routing table:
-
-Board connectors:
- * Headphone Jack
- * Line In Jack
-
-wm8731 pins:
-cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
-
-Example:
-sound {
-	compatible = "atmel,sam9x5-wm8731-audio";
-
-	atmel,model = "wm8731 @ AT91SAM9X5EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "RHPOUT",
-		"Headphone Jack", "LHPOUT",
-		"LLINEIN", "Line In Jack",
-		"RLINEIN", "Line In Jack";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8731>;
-};
diff --git a/Bindings/sound/atmel-wm8904.txt b/Bindings/sound/atmel-wm8904.txt
deleted file mode 100644
index 8bbe50c..0000000
--- a/Bindings/sound/atmel-wm8904.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Atmel ASoC driver with wm8904 audio codec complex
-
-Required properties:
-  - compatible: "atmel,asoc-wm8904"
-  - atmel,model: The user-visible name of this sound complex.
-  - atmel,audio-routing: A list of the connections between audio components.
-    Each entry is a pair of strings, the first being the connection's sink,
-    the second being the connection's source. Valid names for sources and
-    sinks are the WM8904's pins, and the jacks on the board:
-
-    WM8904 pins:
-
-    * IN1L
-    * IN1R
-    * IN2L
-    * IN2R
-    * IN3L
-    * IN3R
-    * HPOUTL
-    * HPOUTR
-    * LINEOUTL
-    * LINEOUTR
-    * MICBIAS
-
-    Board connectors:
-
-    * Headphone Jack
-    * Line In Jack
-    * Mic
-
-  - atmel,ssc-controller: The phandle of the SSC controller
-  - atmel,audio-codec: The phandle of the WM8904 audio codec
-
-Optional properties:
-  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
-
-Example:
-sound {
-	compatible = "atmel,asoc-wm8904";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-	atmel,model = "wm8904 @ AT91SAM9N12EK";
-
-	atmel,audio-routing =
-		"Headphone Jack", "HPOUTL",
-		"Headphone Jack", "HPOUTR",
-		"IN2L", "Line In Jack",
-		"IN2R", "Line In Jack",
-		"Mic", "MICBIAS",
-		"IN1L", "Mic";
-
-	atmel,ssc-controller = <&ssc0>;
-	atmel,audio-codec = <&wm8904>;
-};
diff --git a/Bindings/sound/audio-graph-port.yaml b/Bindings/sound/audio-graph-port.yaml
index b13c08d..28b27e7 100644
--- a/Bindings/sound/audio-graph-port.yaml
+++ b/Bindings/sound/audio-graph-port.yaml
@@ -51,7 +51,7 @@
           - $ref: /schemas/types.yaml#/definitions/phandle
       clocks:
         description: Indicates system clock
-        $ref: /schemas/types.yaml#/definitions/phandle
+        maxItems: 1
       system-clock-frequency:
         $ref: simple-card.yaml#/definitions/system-clock-frequency
       system-clock-direction-out:
diff --git a/Bindings/sound/cirrus,cs35l45.yaml b/Bindings/sound/cirrus,cs35l45.yaml
index 4c9acb8..70f6c62 100644
--- a/Bindings/sound/cirrus,cs35l45.yaml
+++ b/Bindings/sound/cirrus,cs35l45.yaml
@@ -25,6 +25,9 @@
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 1
 
diff --git a/Bindings/sound/cirrus,cs42l43.yaml b/Bindings/sound/cirrus,cs42l43.yaml
index 7f9d8c7..99a5366 100644
--- a/Bindings/sound/cirrus,cs42l43.yaml
+++ b/Bindings/sound/cirrus,cs42l43.yaml
@@ -185,11 +185,12 @@
 
       gpio-ranges:
         items:
-          - description: A phandle to the CODEC pinctrl node
-            minimum: 0
-          - const: 0
-          - const: 0
-          - const: 3
+          - items:
+              - description: A phandle to the CODEC pinctrl node
+                minimum: 0
+              - const: 0
+              - const: 0
+              - const: 3
 
     patternProperties:
       "-state$":
diff --git a/Bindings/sound/cs4341.txt b/Bindings/sound/cs4341.txt
index 12b4aa8..c1d5c8a 100644
--- a/Bindings/sound/cs4341.txt
+++ b/Bindings/sound/cs4341.txt
@@ -9,7 +9,7 @@
           number for SPI.
 
 For required properties on I2C-bus, please consult
-Documentation/devicetree/bindings/i2c/i2c.txt
+dtschema schemas/i2c/i2c-controller.yaml
 For required properties on SPI-bus, please consult
 Documentation/devicetree/bindings/spi/spi-bus.txt
 
diff --git a/Bindings/sound/everest,es8326.yaml b/Bindings/sound/everest,es8326.yaml
index 0778140..8c82d47 100644
--- a/Bindings/sound/everest,es8326.yaml
+++ b/Bindings/sound/everest,es8326.yaml
@@ -38,6 +38,7 @@
     default: 0x0f
 
   everest,mic1-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset plugged.
@@ -46,6 +47,7 @@
     default: 0x22
 
   everest,mic2-src:
+    deprecated: true
     $ref: /schemas/types.yaml#/definitions/uint8
     description:
       the value of reg 2A when headset unplugged.
@@ -87,7 +89,7 @@
        0 means the chip detect jack type again after button released.
     minimum: 0
     maximum: 0x7f
-    default: 0x45
+    default: 0x00
 
 required:
   - compatible
@@ -107,10 +109,8 @@
         clocks = <&clks 10>;
         clock-names = "mclk";
         #sound-dai-cells = <0>;
-        everest,mic1-src = [22];
-        everest,mic2-src = [44];
         everest,jack-pol = [0e];
         everest,interrupt-src = [08];
-        everest,interrupt-clk = [45];
+        everest,interrupt-clk = [00];
       };
     };
diff --git a/Bindings/sound/fsl,asrc.txt b/Bindings/sound/fsl,asrc.txt
deleted file mode 100644
index 998b4c8..0000000
--- a/Bindings/sound/fsl,asrc.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-Freescale Asynchronous Sample Rate Converter (ASRC) Controller
-
-The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
-signal associated with an input clock into a signal associated with a different
-output clock. The driver currently works as a Front End of DPCM with other Back
-Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
-three substreams within totally 10 channels.
-
-Required properties:
-
-  - compatible		: Compatible list, should contain one of the following
-			  compatibles:
-			  "fsl,imx35-asrc",
-			  "fsl,imx53-asrc",
-			  "fsl,imx8qm-asrc",
-			  "fsl,imx8qxp-asrc",
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the spdif interrupt.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
-
-  - clocks		: Contains an entry for each entry in clock-names.
-
-  - clock-names		: Contains the following entries
-	"mem"		  Peripheral access clock to access registers.
-	"ipg"		  Peripheral clock to driver module.
-	"asrck_<0-f>"	  Clock sources for input and output clock.
-	"spba"		  The spba clock is required when ASRC is placed as a
-			  bus slave of the Shared Peripheral Bus and when two
-			  or more bus masters (CPU, DMA or DSP) try to access
-			  it. This property is optional depending on the SoC
-			  design.
-
-   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
-
-   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
-
-   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
-			  by imx8qm/imx8qxp platform
-			  <0> - select the map for asrc0 in imx8qm/imx8qxp
-			  <1> - select the map for asrc1 in imx8qm/imx8qxp
-
-Optional properties:
-
-   - big-endian		: If this property is absent, the little endian mode
-			  will be in use as default. Otherwise, the big endian
-			  mode will be in use for all the device registers.
-
-   - fsl,asrc-format	: Defines a mutual sample format used by DPCM Back
-			  Ends, which can replace the fsl,asrc-width.
-			  The value is 2 (S16_LE), or 6 (S24_LE).
-
-Example:
-
-asrc: asrc@2034000 {
-	compatible = "fsl,imx53-asrc";
-	reg = <0x02034000 0x4000>;
-	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
-	       <&clks 107>, <&clks 0>, <&clks 0>;
-	clock-names = "mem", "ipg", "asrck0",
-		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
-		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
-		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-		"asrck_d", "asrck_e", "asrck_f";
-	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
-	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
-	dma-names = "rxa", "rxb", "rxc",
-		"txa", "txb", "txc";
-	fsl,asrc-rate  = <48000>;
-	fsl,asrc-width = <16>;
-};
diff --git a/Bindings/sound/fsl,easrc.yaml b/Bindings/sound/fsl,easrc.yaml
index a680d7a..0782f3f 100644
--- a/Bindings/sound/fsl,easrc.yaml
+++ b/Bindings/sound/fsl,easrc.yaml
@@ -51,8 +51,8 @@
       - const: ctx3_tx
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
-    const: imx/easrc/easrc-imx8mn.bin
+    items:
+      - const: imx/easrc/easrc-imx8mn.bin
     description: The coefficient table for the filters
 
   fsl,asrc-rate:
diff --git a/Bindings/sound/fsl,imx-asrc.yaml b/Bindings/sound/fsl,imx-asrc.yaml
new file mode 100644
index 0000000..bfef2fc
--- /dev/null
+++ b/Bindings/sound/fsl,imx-asrc.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,imx-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+description:
+  The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of
+  a signal associated with an input clock into a signal associated with a
+  different output clock. The driver currently works as a Front End of DPCM
+  with other Back Ends Audio controller such as ESAI, SSI and SAI. It has
+  three pairs to support three substreams within totally 10 channels.
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx35-asrc
+          - fsl,imx53-asrc
+          - fsl,imx8qm-asrc
+          - fsl,imx8qxp-asrc
+      - items:
+          - enum:
+              - fsl,imx6sx-asrc
+              - fsl,imx6ul-asrc
+          - const: fsl,imx53-asrc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 6
+
+  dma-names:
+    items:
+      - const: rxa
+      - const: rxb
+      - const: rxc
+      - const: txa
+      - const: txb
+      - const: txc
+
+  clocks:
+    maxItems: 19
+
+  clock-names:
+    items:
+      - const: mem
+      - const: ipg
+      - const: asrck_0
+      - const: asrck_1
+      - const: asrck_2
+      - const: asrck_3
+      - const: asrck_4
+      - const: asrck_5
+      - const: asrck_6
+      - const: asrck_7
+      - const: asrck_8
+      - const: asrck_9
+      - const: asrck_a
+      - const: asrck_b
+      - const: asrck_c
+      - const: asrck_d
+      - const: asrck_e
+      - const: asrck_f
+      - const: spba
+
+  fsl,asrc-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample rate used by DPCM Back Ends
+
+  fsl,asrc-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The mutual sample width used by DPCM Back Ends
+    enum: [16, 24]
+
+  fsl,asrc-clk-map:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines clock map used in driver
+      <0> - select the map for asrc0 in imx8qm/imx8qxp
+      <1> - select the map for asrc1 in imx8qm/imx8qxp
+    enum: [0, 1]
+
+  big-endian:
+    type: boolean
+    description:
+      If this property is absent, the little endian mode will be in use as
+      default. Otherwise, the big endian mode will be in use for all the
+      device registers.
+
+  fsl,asrc-format:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines a mutual sample format used by DPCM Back Ends, which can
+      replace the fsl,asrc-width. The value is 2 (S16_LE), or 6 (S24_LE).
+    enum: [2, 6]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - fsl,asrc-rate
+  - fsl,asrc-width
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-asrc
+              - fsl,imx8qxp-asrc
+    then:
+      required:
+        - fsl,asrc-clk-map
+    else:
+      properties:
+        fsl,asrc-clk-map: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    asrc: asrc@2034000 {
+        compatible = "fsl,imx53-asrc";
+        reg = <0x02034000 0x4000>;
+        interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+                 <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+                 <&clks IMX6QDL_CLK_SPBA>;
+        clock-names = "mem", "ipg", "asrck_0",
+                "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+                "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+                "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+                "asrck_d", "asrck_e", "asrck_f", "spba";
+        dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+               <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+        dma-names = "rxa", "rxb", "rxc",
+                    "txa", "txb", "txc";
+        fsl,asrc-rate  = <48000>;
+        fsl,asrc-width = <16>;
+    };
diff --git a/Bindings/sound/fsl,micfil.yaml b/Bindings/sound/fsl,micfil.yaml
index b7e6058..c1e9803 100644
--- a/Bindings/sound/fsl,micfil.yaml
+++ b/Bindings/sound/fsl,micfil.yaml
@@ -15,10 +15,16 @@
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mm-micfil
-      - fsl,imx8mp-micfil
-      - fsl,imx93-micfil
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx95-micfil
+          - const: fsl,imx93-micfil
+
+      - enum:
+          - fsl,imx8mm-micfil
+          - fsl,imx8mp-micfil
+          - fsl,imx93-micfil
 
   reg:
     maxItems: 1
diff --git a/Bindings/sound/fsl,sai.yaml b/Bindings/sound/fsl,sai.yaml
index 088c26b..2456d95 100644
--- a/Bindings/sound/fsl,sai.yaml
+++ b/Bindings/sound/fsl,sai.yaml
@@ -39,6 +39,7 @@
               - fsl,imx8qm-sai
               - fsl,imx8ulp-sai
               - fsl,imx93-sai
+              - fsl,imx95-sai
               - fsl,vf610-sai
 
   reg:
@@ -75,12 +76,17 @@
           - const: pll11k
         minItems: 4
 
+  power-domains:
+    maxItems: 1
+
   dmas:
+    minItems: 1
     items:
       - description: DMA controller phandle and request line for RX
       - description: DMA controller phandle and request line for TX
 
   dma-names:
+    minItems: 1
     items:
       - const: rx
       - const: tx
diff --git a/Bindings/sound/infineon,peb2466.yaml b/Bindings/sound/infineon,peb2466.yaml
index 66993d3..5e11ce2 100644
--- a/Bindings/sound/infineon,peb2466.yaml
+++ b/Bindings/sound/infineon,peb2466.yaml
@@ -51,7 +51,7 @@
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description:
       Filters coefficients file to load. If this property is omitted, internal
       filters are disabled.
diff --git a/Bindings/sound/microchip,sama7g5-i2smcc.yaml b/Bindings/sound/microchip,sama7g5-i2smcc.yaml
index 651f61c..fb630a1 100644
--- a/Bindings/sound/microchip,sama7g5-i2smcc.yaml
+++ b/Bindings/sound/microchip,sama7g5-i2smcc.yaml
@@ -24,9 +24,14 @@
     const: 0
 
   compatible:
-    enum:
-      - microchip,sam9x60-i2smcc
-      - microchip,sama7g5-i2smcc
+    oneOf:
+      - enum:
+          - microchip,sam9x60-i2smcc
+          - microchip,sama7g5-i2smcc
+      - items:
+          - enum:
+              - microchip,sam9x7-i2smcc
+          - const: microchip,sam9x60-i2smcc
 
   reg:
     maxItems: 1
diff --git a/Bindings/sound/qcom,q6usb.yaml b/Bindings/sound/qcom,q6usb.yaml
new file mode 100644
index 0000000..37161d2
--- /dev/null
+++ b/Bindings/sound/qcom,q6usb.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ASoC DPCM USB backend DAI
+
+maintainers:
+  - Wesley Cheng <quic_wcheng@quicinc.com>
+
+description:
+  The USB port is a supported AFE path on the Q6 DSP.  This ASoC DPCM
+  backend DAI will communicate the required settings to initialize the
+  XHCI host controller properly for enabling the offloaded audio stream.
+  Parameters defined under this node will carry settings, which will be
+  passed along during the QMI stream enable request and configuration of
+  the XHCI host controller.
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6usb
+
+  iommus:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  qcom,usb-audio-intr-idx:
+    description:
+      Desired XHCI interrupter number to use.  Depending on the audio DSP
+      on the platform, it will operate on a specific XHCI interrupter.
+    $ref: /schemas/types.yaml#/definitions/uint16
+    maximum: 8
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - qcom,usb-audio-intr-idx
+
+additionalProperties: false
+
+examples:
+  - |
+    dais {
+      compatible = "qcom,q6usb";
+      #sound-dai-cells = <1>;
+      iommus = <&apps_smmu 0x180f 0x0>;
+      qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+    };
diff --git a/Bindings/sound/qcom,sm8250.yaml b/Bindings/sound/qcom,sm8250.yaml
index 6f41974..2ab6871 100644
--- a/Bindings/sound/qcom,sm8250.yaml
+++ b/Bindings/sound/qcom,sm8250.yaml
@@ -107,7 +107,7 @@
         properties:
           sound-dai:
             minItems: 1
-            maxItems: 4
+            maxItems: 8
 
     required:
       - link-name
diff --git a/Bindings/sound/qcom,wcd938x.yaml b/Bindings/sound/qcom,wcd938x.yaml
index adbfa67..cf6c378 100644
--- a/Bindings/sound/qcom,wcd938x.yaml
+++ b/Bindings/sound/qcom,wcd938x.yaml
@@ -15,6 +15,7 @@
 
 allOf:
   - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
 
 properties:
   compatible:
@@ -22,92 +23,12 @@
       - qcom,wcd9380-codec
       - qcom,wcd9385-codec
 
-  reset-gpios:
-    description: GPIO spec for reset line to use
-    maxItems: 1
-
   us-euro-gpios:
     description: GPIO spec for swapping gnd and mic segments
     maxItems: 1
 
-  vdd-buck-supply:
-    description: A reference to the 1.8V buck supply
-
-  vdd-rxtx-supply:
-    description: A reference to the 1.8V rx supply
-
-  vdd-io-supply:
-    description: A reference to the 1.8V I/O supply
-
-  vdd-mic-bias-supply:
-    description: A reference to the 3.8V mic bias supply
-
-  qcom,tx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire tx device phandle
-
-  qcom,rx-device:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: A reference to Soundwire rx device phandle
-
-  qcom,micbias1-microvolt:
-    description: micbias1 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias2-microvolt:
-    description: micbias2 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias3-microvolt:
-    description: micbias3 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,micbias4-microvolt:
-    description: micbias4 voltage
-    minimum: 1800000
-    maximum: 2850000
-
-  qcom,hphl-jack-type-normally-closed:
-    description: Indicates that HPHL jack switch type is normally closed
-    type: boolean
-
-  qcom,ground-jack-type-normally-closed:
-    description: Indicates that Headset Ground switch type is normally closed
-    type: boolean
-
-  qcom,mbhc-headset-vthreshold-microvolt:
-    description: Voltage threshold value for headset detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-headphone-vthreshold-microvolt:
-    description: Voltage threshold value for headphone detection
-    minimum: 0
-    maximum: 2850000
-
-  qcom,mbhc-buttons-vthreshold-microvolt:
-    description:
-      Array of 8 Voltage threshold values corresponding to headset
-      button0 - button7
-    minItems: 8
-    maxItems: 8
-
-  '#sound-dai-cells':
-    const: 1
-
 required:
   - compatible
-  - reset-gpios
-  - qcom,tx-device
-  - qcom,rx-device
-  - qcom,micbias1-microvolt
-  - qcom,micbias2-microvolt
-  - qcom,micbias3-microvolt
-  - qcom,micbias4-microvolt
-  - "#sound-dai-cells"
 
 unevaluatedProperties: false
 
diff --git a/Bindings/sound/qcom,wcd939x-sdw.yaml b/Bindings/sound/qcom,wcd939x-sdw.yaml
new file mode 100644
index 0000000..67ed770
--- /dev/null
+++ b/Bindings/sound/qcom,wcd939x-sdw.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x-sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire devices on WCD9390/WCD9395
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices. This bindings is for the devices.
+
+properties:
+  compatible:
+    const: sdw20217010e00
+
+  reg:
+    maxItems: 1
+
+  qcom,tx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host tx ports.
+      In the order of the device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+
+  qcom,rx-port-mapping:
+    description: |
+      Specifies static port mapping between device and host rx ports.
+      In the order of device port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd938x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Bindings/sound/qcom,wcd939x.yaml b/Bindings/sound/qcom,wcd939x.yaml
new file mode 100644
index 0000000..6e76f6a
--- /dev/null
+++ b/Bindings/sound/qcom,wcd939x.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd939x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire devices.
+  The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem
+  accessible over an I2C interface.
+  The Audio Headphone and Microphone data path between the Codec and the USB-C Mux
+  subsystems are external to the IC, thus requiring DT port-endpoint graph description
+  to handle USB-C altmode & orientation switching for Audio Accessory Mode.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: qcom,wcd93xx-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,wcd9390-codec
+      - items:
+          - const: qcom,wcd9395-codec
+          - const: qcom,wcd9390-codec
+
+  mode-switch:
+    description: Flag the port as possible handler of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the WCD939x Codec node to USB MUX subsystems for the
+      purpose of handling altmode muxing and orientation switching to detect and
+      enable Audio Accessory Mode.
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    codec {
+        compatible = "qcom,wcd9390-codec";
+        reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>;
+        #sound-dai-cells = <1>;
+        qcom,tx-device = <&wcd939x_tx>;
+        qcom,rx-device = <&wcd939x_rx>;
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        qcom,hphl-jack-type-normally-closed;
+        qcom,ground-jack-type-normally-closed;
+        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+    };
+
+    /* ... */
+
+    soundwire@3210000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03210000 0x2000>;
+        wcd939x_rx: codec@0,4 {
+            compatible = "sdw20217010e00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5 6>;
+        };
+    };
+
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+        wcd938x_tx: codec@0,3 {
+            compatible = "sdw20217010e00";
+            reg = <0 3>;
+            qcom,tx-port-mapping = <2 3 4 5>;
+        };
+    };
+
+...
diff --git a/Bindings/sound/qcom,wcd93xx-common.yaml b/Bindings/sound/qcom,wcd93xx-common.yaml
new file mode 100644
index 0000000..f78ba14
--- /dev/null
+++ b/Bindings/sound/qcom,wcd93xx-common.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd93xx-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Qualcomm WCD93xx Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
+  qcom,tx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire tx device phandle
+
+  qcom,rx-device:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A reference to Soundwire rx device phandle
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,hphl-jack-type-normally-closed:
+    description: Indicates that HPHL jack switch type is normally closed
+    type: boolean
+
+  qcom,ground-jack-type-normally-closed:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-headset-vthreshold-microvolt:
+    description: Voltage threshold value for headset detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-headphone-vthreshold-microvolt:
+    description: Voltage threshold value for headphone detection
+    minimum: 0
+    maximum: 2850000
+
+  qcom,mbhc-buttons-vthreshold-microvolt:
+    description:
+      Array of 8 Voltage threshold values corresponding to headset
+      button0 - button7
+    minItems: 8
+    maxItems: 8
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - reset-gpios
+  - qcom,tx-device
+  - qcom,rx-device
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#sound-dai-cells"
+
+additionalProperties: true
diff --git a/Bindings/sound/qcom,wsa8840.yaml b/Bindings/sound/qcom,wsa8840.yaml
index d717017..22798d2 100644
--- a/Bindings/sound/qcom,wsa8840.yaml
+++ b/Bindings/sound/qcom,wsa8840.yaml
@@ -28,6 +28,10 @@
     description: Powerdown/Shutdown line to use (pin SD_N)
     maxItems: 1
 
+  reset-gpios:
+    description: Powerdown/Shutdown line to use (pin SD_N)
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 0
 
@@ -37,11 +41,16 @@
 required:
   - compatible
   - reg
-  - powerdown-gpios
   - '#sound-dai-cells'
   - vdd-1p8-supply
   - vdd-io-supply
 
+oneOf:
+  - required:
+      - powerdown-gpios
+  - required:
+      - reset-gpios
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/sound/realtek,rt1015.yaml b/Bindings/sound/realtek,rt1015.yaml
new file mode 100644
index 0000000..8801960
--- /dev/null
+++ b/Bindings/sound/realtek,rt1015.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt1015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT1015 Mono Class D Audio Amplifier
+
+maintainers:
+  - Jack Yu <jack.yu@realtek.com>
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt1015
+
+  reg:
+    maxItems: 1
+
+  realtek,power-up-delay-ms:
+    description: Set a delay time for flush work to be completed,
+      this vlaue is adjustable depending on platform.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@28 {
+            compatible = "realtek,rt1015";
+            reg = <0x28>;
+            realtek,power-up-delay-ms = <50>;
+        };
+    };
diff --git a/Bindings/sound/rt1015.txt b/Bindings/sound/rt1015.txt
deleted file mode 100644
index e498966..0000000
--- a/Bindings/sound/rt1015.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-RT1015 Mono Class D Audio Amplifier
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : "realtek,rt1015".
-
-- reg : The I2C address of the device.
-
-Optional properties:
-
-- realtek,power-up-delay-ms
-  Set a delay time for flush work to be completed,
-  this value is adjustable depending on platform.
-
-Example:
-
-rt1015: codec@28 {
-	compatible = "realtek,rt1015";
-	reg = <0x28>;
-	realtek,power-up-delay-ms = <50>;
-};
diff --git a/Bindings/sound/rt5645.txt b/Bindings/sound/rt5645.txt
index 41a62fd..c1fa379 100644
--- a/Bindings/sound/rt5645.txt
+++ b/Bindings/sound/rt5645.txt
@@ -20,6 +20,11 @@
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";
diff --git a/Bindings/sound/samsung,tm2.yaml b/Bindings/sound/samsung,tm2.yaml
index 7605925..cbc7ba3 100644
--- a/Bindings/sound/samsung,tm2.yaml
+++ b/Bindings/sound/samsung,tm2.yaml
@@ -25,8 +25,11 @@
     description: Phandles to the codecs.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      - description: Phandle to the WM5110 audio codec.
-      - description: Phandle to the HDMI transmitter node.
+      - items:
+          - description: Phandle to the WM5110 audio codec.
+      - items:
+          - description: Phandle to the HDMI transmitter node.
+
 
   samsung,audio-routing:
     description: |
diff --git a/Bindings/spi/atmel,at91rm9200-spi.yaml b/Bindings/spi/atmel,at91rm9200-spi.yaml
index 5836758..32e7c14 100644
--- a/Bindings/spi/atmel,at91rm9200-spi.yaml
+++ b/Bindings/spi/atmel,at91rm9200-spi.yaml
@@ -22,7 +22,6 @@
           - const: atmel,at91rm9200-spi
       - items:
           - const: microchip,sam9x7-spi
-          - const: microchip,sam9x60-spi
           - const: atmel,at91rm9200-spi
 
   reg:
diff --git a/Bindings/spi/samsung,spi.yaml b/Bindings/spi/samsung,spi.yaml
index 79da99c..f681372 100644
--- a/Bindings/spi/samsung,spi.yaml
+++ b/Bindings/spi/samsung,spi.yaml
@@ -17,11 +17,13 @@
   compatible:
     oneOf:
       - enum:
+          - google,gs101-spi
           - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
           - samsung,s3c6410-spi
           - samsung,s5pv210-spi # for S5PV210 and S5PC110
           - samsung,exynos4210-spi
           - samsung,exynos5433-spi
+          - samsung,exynos850-spi
           - samsung,exynosautov9-spi
           - tesla,fsd-spi
       - const: samsung,exynos7-spi
@@ -74,8 +76,6 @@
   - compatible
   - clocks
   - clock-names
-  - dmas
-  - dma-names
   - interrupts
   - reg
 
diff --git a/Bindings/spi/spi-controller.yaml b/Bindings/spi/spi-controller.yaml
index 524f6fe..093150c 100644
--- a/Bindings/spi/spi-controller.yaml
+++ b/Bindings/spi/spi-controller.yaml
@@ -69,6 +69,21 @@
          Should be generally avoided and be replaced by
          spi-cs-high + ACTIVE_HIGH.
 
+  fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX and TX data FIFOs in bytes.
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the RX data FIFO in bytes.
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Size of the TX data FIFO in bytes.
+
   num-cs:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -116,6 +131,10 @@
       - compatible
       - reg
 
+dependencies:
+  rx-fifo-depth: [ tx-fifo-depth ]
+  tx-fifo-depth: [ rx-fifo-depth ]
+
 allOf:
   - if:
       not:
@@ -129,6 +148,14 @@
       properties:
         "#address-cells":
           const: 0
+  - not:
+      required:
+        - fifo-depth
+        - rx-fifo-depth
+  - not:
+      required:
+        - fifo-depth
+        - tx-fifo-depth
 
 additionalProperties: true
 
diff --git a/Bindings/spi/spi-fsl-lpspi.yaml b/Bindings/spi/spi-fsl-lpspi.yaml
index 727c534..2ff1742 100644
--- a/Bindings/spi/spi-fsl-lpspi.yaml
+++ b/Bindings/spi/spi-fsl-lpspi.yaml
@@ -22,6 +22,7 @@
           - enum:
               - fsl,imx8ulp-spi
               - fsl,imx93-spi
+              - fsl,imx95-spi
           - const: fsl,imx7ulp-spi
   reg:
     maxItems: 1
diff --git a/Bindings/spi/spi-nxp-fspi.yaml b/Bindings/spi/spi-nxp-fspi.yaml
index 7fd5911..4a5f41b 100644
--- a/Bindings/spi/spi-nxp-fspi.yaml
+++ b/Bindings/spi/spi-nxp-fspi.yaml
@@ -15,12 +15,18 @@
 
 properties:
   compatible:
-    enum:
-      - nxp,imx8dxl-fspi
-      - nxp,imx8mm-fspi
-      - nxp,imx8mp-fspi
-      - nxp,imx8qxp-fspi
-      - nxp,lx2160a-fspi
+    oneOf:
+      - enum:
+          - nxp,imx8dxl-fspi
+          - nxp,imx8mm-fspi
+          - nxp,imx8mp-fspi
+          - nxp,imx8qxp-fspi
+          - nxp,lx2160a-fspi
+      - items:
+          - enum:
+              - nxp,imx93-fspi
+              - nxp,imx95-fspi
+          - const: nxp,imx8mm-fspi
 
   reg:
     items:
diff --git a/Bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
index a1c9698..cf07b8f 100644
--- a/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -56,7 +56,7 @@
   ranges: true
 
 patternProperties:
-  "^sram@[a-z0-9]+":
+  "^sram@[a-f0-9]+":
     $ref: /schemas/sram/sram.yaml#
     unevaluatedProperties: false
 
diff --git a/Bindings/submitting-patches.rst b/Bindings/submitting-patches.rst
index 36a17b2..a64f21a5 100644
--- a/Bindings/submitting-patches.rst
+++ b/Bindings/submitting-patches.rst
@@ -15,6 +15,11 @@
 
        "dt-bindings: <binding dir>: ..."
 
+     Few subsystems, like ASoC, media, regulators and SPI, expect reverse order
+     of the prefixes::
+
+       "<binding dir>: dt-bindings: ..."
+
      The 80 characters of the subject are precious. It is recommended to not
      use "Documentation" or "doc" because that is implied. All bindings are
      docs. Repeating "binding" again should also be avoided.
@@ -42,28 +47,18 @@
      the code implementing the binding.
 
   6) Any compatible strings used in a chip or board DTS file must be
-     previously documented in the corresponding DT binding text file
+     previously documented in the corresponding DT binding file
      in Documentation/devicetree/bindings.  This rule applies even if
      the Linux device driver does not yet match on the compatible
      string.  [ checkpatch will emit warnings if this step is not
      followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
      ("checkpatch: add DT compatible string documentation checks"). ]
 
-  7) The wildcard "<chip>" may be used in compatible strings, as in
-     the following example:
-
-         - compatible: Must contain '"nvidia,<chip>-pcie",
-           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
-
-     As in the above example, the known values of "<chip>" should be
-     documented if it is used.
-
-  8) If a documented compatible string is not yet matched by the
+  7) If a documented compatible string is not yet matched by the
      driver, the documentation should also include a compatible
-     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
-     example above).
+     string that is matched by the driver.
 
-  9) Bindings are actively used by multiple projects other than the Linux
+  8) Bindings are actively used by multiple projects other than the Linux
      Kernel, extra care and consideration may need to be taken when making changes
      to existing bindings.
 
diff --git a/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 9b2272a..6b3aea6 100644
--- a/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -21,6 +21,7 @@
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
+      - allwinner,sun50i-h616-ths
 
   clocks:
     minItems: 1
@@ -50,6 +51,10 @@
   nvmem-cell-names:
     const: calibration
 
+  allwinner,sram:
+    maxItems: 1
+    description: phandle to device controlling temperate offset SYS_CFG register
+
   # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
@@ -65,6 +70,7 @@
               - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
+              - allwinner,sun50i-h616-ths
 
     then:
       properties:
@@ -83,6 +89,17 @@
           minItems: 2
 
   - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: allwinner,sun50i-h616-ths
+
+    then:
+      properties:
+        allwinner,sram: false
+
+  - if:
       properties:
         compatible:
           contains:
@@ -101,17 +118,12 @@
           const: 1
 
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - allwinner,sun8i-h3-ths
-              - allwinner,sun8i-r40-ths
-              - allwinner,sun20i-d1-ths
-              - allwinner,sun50i-a64-ths
-              - allwinner,sun50i-a100-ths
-              - allwinner,sun50i-h5-ths
-              - allwinner,sun50i-h6-ths
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - allwinner,sun8i-a83t-ths
 
     then:
       required:
diff --git a/Bindings/thermal/da9062-thermal.txt b/Bindings/thermal/da9062-thermal.txt
deleted file mode 100644
index e241bb5..0000000
--- a/Bindings/thermal/da9062-thermal.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Dialog DA9062/61 TJUNC Thermal Module
-
-This module is part of the DA9061/DA9062. For more details about entire
-DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-
-Junction temperature thermal module uses an interrupt signal to identify
-high THERMAL_TRIP_HOT temperatures for the PMIC device.
-
-Required properties:
-
-- compatible: should be one of the following valid compatible string lines:
-        "dlg,da9061-thermal", "dlg,da9062-thermal"
-        "dlg,da9062-thermal"
-
-Optional properties:
-
-- polling-delay-passive : Specify the polling period, measured in
-    milliseconds, between thermal zone device update checks.
-
-Example: DA9062
-
-	pmic0: da9062@58 {
-		thermal {
-			compatible = "dlg,da9062-thermal";
-			polling-delay-passive = <3000>;
-		};
-	};
-
-Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
-
-	pmic0: da9061@58 {
-		thermal {
-			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
-			polling-delay-passive = <3000>;
-		};
-	};
diff --git a/Bindings/thermal/dlg,da9062-thermal.yaml b/Bindings/thermal/dlg,da9062-thermal.yaml
new file mode 100644
index 0000000..e8b2cac
--- /dev/null
+++ b/Bindings/thermal/dlg,da9062-thermal.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/dlg,da9062-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9062/61 TJUNC Thermal Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062. For more details about entire
+  DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  Junction temperature thermal module uses an interrupt signal to identify
+  high THERMAL_TRIP_HOT temperatures for the PMIC device.
+
+properties:
+  compatible:
+    oneOf:
+      - const: dlg,da9062-thermal
+      - items:
+          - const: dlg,da9061-thermal
+          - const: dlg,da9062-thermal
+
+  polling-delay-passive:
+    description:
+      Specify the polling period, measured in milliseconds, between
+      thermal zone device update checks.
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Bindings/thermal/qoriq-thermal.yaml b/Bindings/thermal/qoriq-thermal.yaml
index 1457440..d155d67 100644
--- a/Bindings/thermal/qoriq-thermal.yaml
+++ b/Bindings/thermal/qoriq-thermal.yaml
@@ -33,7 +33,8 @@
     description: |
       The values to be programmed into TTRnCR, as specified by the SoC
       reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
-    maxItems: 4
+    minItems: 2
+    maxItems: 7
 
   fsl,tmu-calibration:
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
diff --git a/Bindings/thermal/rcar-gen3-thermal.yaml b/Bindings/thermal/rcar-gen3-thermal.yaml
index ecf276f..6a81cb6 100644
--- a/Bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Bindings/thermal/rcar-gen3-thermal.yaml
@@ -29,6 +29,7 @@
       - renesas,r8a779a0-thermal # R-Car V3U
       - renesas,r8a779f0-thermal # R-Car S4-8
       - renesas,r8a779g0-thermal # R-Car V4H
+      - renesas,r8a779h0-thermal # R-Car V4M
 
   reg: true
 
@@ -90,6 +91,7 @@
             enum:
               - renesas,r8a779f0-thermal
               - renesas,r8a779g0-thermal
+              - renesas,r8a779h0-thermal
   then:
     required:
       - interrupts
diff --git a/Bindings/thermal/thermal-zones.yaml b/Bindings/thermal/thermal-zones.yaml
index dbd5262..68398e7 100644
--- a/Bindings/thermal/thermal-zones.yaml
+++ b/Bindings/thermal/thermal-zones.yaml
@@ -228,8 +228,6 @@
             additionalProperties: false
 
     required:
-      - polling-delay
-      - polling-delay-passive
       - thermal-sensors
       - trips
 
diff --git a/Bindings/timer/arm,arch_timer_mmio.yaml b/Bindings/timer/arm,arch_timer_mmio.yaml
index 7a4a6ab..ab8f289 100644
--- a/Bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Bindings/timer/arm,arch_timer_mmio.yaml
@@ -60,7 +60,7 @@
       be implemented in an always-on power domain."
 
 patternProperties:
-  '^frame@[0-9a-z]*$':
+  '^frame@[0-9a-f]+$':
     type: object
     additionalProperties: false
     description: A timer node has up to 8 frame sub-nodes, each with the following properties.
diff --git a/Bindings/timer/cdns,ttc.yaml b/Bindings/timer/cdns,ttc.yaml
index dbba780..da34246 100644
--- a/Bindings/timer/cdns,ttc.yaml
+++ b/Bindings/timer/cdns,ttc.yaml
@@ -32,12 +32,23 @@
     description: |
       Bit width of the timer, necessary if not 16.
 
+  "#pwm-cells":
+    const: 3
+
 required:
   - compatible
   - reg
-  - interrupts
   - clocks
 
+allOf:
+  - if:
+      not:
+        required:
+          - "#pwm-cells"
+    then:
+      required:
+        - interrupts
+
 additionalProperties: false
 
 examples:
@@ -50,3 +61,12 @@
         clocks = <&cpu_clk 3>;
         timer-width = <32>;
     };
+
+  - |
+    pwm: pwm@f8002000 {
+        compatible = "cdns,ttc";
+        reg = <0xf8002000 0x1000>;
+        clocks = <&cpu_clk 3>;
+        timer-width = <32>;
+        #pwm-cells = <3>;
+    };
diff --git a/Bindings/timer/mediatek,mtk-timer.txt b/Bindings/timer/mediatek,mtk-timer.txt
deleted file mode 100644
index b3e797e..0000000
--- a/Bindings/timer/mediatek,mtk-timer.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-MediaTek Timers
----------------
-
-MediaTek SoCs have different timers on different platforms,
-- CPUX (ARM/ARM64 System Timer)
-- GPT (General Purpose Timer)
-- SYST (System Timer)
-
-The proper timer will be selected automatically by driver.
-
-Required properties:
-- compatible should contain:
-	For those SoCs that use GPT
-	* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
-	* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
-	* "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
-	* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
-	* "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
-	* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
-	* "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
-	* "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
-	* "mediatek,mt8516-timer" for MT8516 compatible timers (GPT)
-	* "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT)
-
-	For those SoCs that use SYST
-	* "mediatek,mt8183-timer" for MT8183 compatible timers (SYST)
-	* "mediatek,mt8186-timer" for MT8186 compatible timers (SYST)
-	* "mediatek,mt8188-timer" for MT8188 compatible timers (SYST)
-	* "mediatek,mt8192-timer" for MT8192 compatible timers (SYST)
-	* "mediatek,mt8195-timer" for MT8195 compatible timers (SYST)
-	* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
-	* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
-
-	For those SoCs that use CPUX
-	* "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX)
-	* "mediatek,mt8365-systimer" for MT8365 compatible timers (CPUX)
-
-- reg: Should contain location and length for timer register.
-- clocks: Should contain system clock.
-
-Examples:
-
-	timer@10008000 {
-		compatible = "mediatek,mt6577-timer";
-		reg = <0x10008000 0x80>;
-		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&system_clk>;
-	};
diff --git a/Bindings/timer/mediatek,timer.yaml b/Bindings/timer/mediatek,timer.yaml
new file mode 100644
index 0000000..f68fc70
--- /dev/null
+++ b/Bindings/timer/mediatek,timer.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mediatek,timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC timers
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  MediaTek SoCs have different timers on different platforms,
+  CPUX (ARM/ARM64 System Timer), GPT (General Purpose Timer)
+  and SYST (System Timer).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt6577-timer
+              - mediatek,mt6765-timer
+              - mediatek,mt6795-systimer
+      # GPT Timers
+      - items:
+          - enum:
+              - mediatek,mt2701-timer
+              - mediatek,mt6580-timer
+              - mediatek,mt6582-timer
+              - mediatek,mt6589-timer
+              - mediatek,mt7623-timer
+              - mediatek,mt8127-timer
+              - mediatek,mt8135-timer
+              - mediatek,mt8173-timer
+              - mediatek,mt8516-timer
+          - const: mediatek,mt6577-timer
+      # SYST Timers
+      - items:
+          - enum:
+              - mediatek,mt7629-timer
+              - mediatek,mt8183-timer
+              - mediatek,mt8186-timer
+              - mediatek,mt8188-timer
+              - mediatek,mt8192-timer
+              - mediatek,mt8195-timer
+              - mediatek,mt8365-systimer
+          - const: mediatek,mt6765-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Timer clock
+      - description: RTC or bus clock
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@10008000 {
+      compatible = "mediatek,mt6577-timer";
+      reg = <0x10008000 0x80>;
+      interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&system_clk>;
+    };
diff --git a/Bindings/timer/mrvl,mmp-timer.yaml b/Bindings/timer/mrvl,mmp-timer.yaml
index 1ee4aab..fe6bc41 100644
--- a/Bindings/timer/mrvl,mmp-timer.yaml
+++ b/Bindings/timer/mrvl,mmp-timer.yaml
@@ -9,7 +9,7 @@
 maintainers:
   - Daniel Lezcano <daniel.lezcano@linaro.org>
   - Thomas Gleixner <tglx@linutronix.de>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 properties:
   $nodename:
diff --git a/Bindings/timer/nxp,sysctr-timer.yaml b/Bindings/timer/nxp,sysctr-timer.yaml
index 2b9653d..891cca0 100644
--- a/Bindings/timer/nxp,sysctr-timer.yaml
+++ b/Bindings/timer/nxp,sysctr-timer.yaml
@@ -18,7 +18,9 @@
 
 properties:
   compatible:
-    const: nxp,sysctr-timer
+    enum:
+      - nxp,imx95-sysctr-timer
+      - nxp,sysctr-timer
 
   reg:
     maxItems: 1
diff --git a/Bindings/timer/ralink,cevt-systick.yaml b/Bindings/timer/ralink,cevt-systick.yaml
new file mode 100644
index 0000000..59d97fe
--- /dev/null
+++ b/Bindings/timer/ralink,cevt-systick.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ralink,cevt-systick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System tick counter present in Ralink family SoCs
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    const: ralink,cevt-systick
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    systick@d00 {
+        compatible = "ralink,cevt-systick";
+        reg = <0xd00 0x10>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <7>;
+    };
+...
diff --git a/Bindings/timer/renesas,ostm.yaml b/Bindings/timer/renesas,ostm.yaml
index 7207929..8b06a68 100644
--- a/Bindings/timer/renesas,ostm.yaml
+++ b/Bindings/timer/renesas,ostm.yaml
@@ -23,7 +23,7 @@
       - enum:
           - renesas,r7s72100-ostm  # RZ/A1H
           - renesas,r7s9210-ostm   # RZ/A2M
-          - renesas,r9a07g043-ostm # RZ/G2UL
+          - renesas,r9a07g043-ostm # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-ostm # RZ/G2{L,LC}
           - renesas,r9a07g054-ostm # RZ/V2L
       - const: renesas,ostm        # Generic
diff --git a/Bindings/timer/renesas,tmu.yaml b/Bindings/timer/renesas,tmu.yaml
index a67e427..84bbe15 100644
--- a/Bindings/timer/renesas,tmu.yaml
+++ b/Bindings/timer/renesas,tmu.yaml
@@ -46,7 +46,19 @@
 
   interrupts:
     minItems: 2
-    maxItems: 3
+    items:
+      - description: Underflow interrupt, channel 0
+      - description: Underflow interrupt, channel 1
+      - description: Underflow interrupt, channel 2
+      - description: Input capture interrupt, channel 2
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: tuni0
+      - const: tuni1
+      - const: tuni2
+      - const: ticpi2
 
   clocks:
     maxItems: 1
@@ -100,7 +112,9 @@
             reg = <0xffd80000 0x30>;
             interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
             clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
             clock-names = "fck";
             power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/Bindings/timer/samsung,exynos4210-mct.yaml b/Bindings/timer/samsung,exynos4210-mct.yaml
index 829bd22..774b799 100644
--- a/Bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Bindings/timer/samsung,exynos4210-mct.yaml
@@ -26,6 +26,7 @@
       - items:
           - enum:
               - axis,artpec8-mct
+              - google,gs101-mct
               - samsung,exynos3250-mct
               - samsung,exynos5250-mct
               - samsung,exynos5260-mct
@@ -127,6 +128,7 @@
           contains:
             enum:
               - axis,artpec8-mct
+              - google,gs101-mct
               - samsung,exynos5260-mct
               - samsung,exynos5420-mct
               - samsung,exynos5433-mct
diff --git a/Bindings/tpm/tcg,tpm_tis-spi.yaml b/Bindings/tpm/tcg,tpm_tis-spi.yaml
index c3413b4..6cb2de7 100644
--- a/Bindings/tpm/tcg,tpm_tis-spi.yaml
+++ b/Bindings/tpm/tcg,tpm_tis-spi.yaml
@@ -20,6 +20,7 @@
   compatible:
     items:
       - enum:
+          - atmel,attpm20p
           - infineon,slb9670
           - st,st33htpm-spi
           - st,st33zp24-spi
diff --git a/Bindings/trivial-devices.yaml b/Bindings/trivial-devices.yaml
index 79dcd92..e07be7b 100644
--- a/Bindings/trivial-devices.yaml
+++ b/Bindings/trivial-devices.yaml
@@ -28,6 +28,7 @@
 
   compatible:
     items:
+      # Entries are sorted alphanumerically by the compatible
       - enum:
             # Acbel fsg032 power supply
           - acbel,fsg032
@@ -47,14 +48,16 @@
           - adi,lt7182s
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
+            # Temperature monitoring of Astera Labs PT5161L PCIe retimer
+          - asteralabs,pt5161l
             # i2c serial eeprom (24cxx)
           - at,24c08
+            # i2c h/w elliptic curve crypto module
+          - atmel,atecc508a
             # ATSHA204 - i2c h/w symmetric crypto module
           - atmel,atsha204
             # ATSHA204A - i2c h/w symmetric crypto module
           - atmel,atsha204a
-            # i2c h/w elliptic curve crypto module
-          - atmel,atecc508a
             # BPA-RS600: Power Supply
           - blutek,bpa-rs600
             # Bosch Sensortec pressure, temperature, humididty and VOC sensor
@@ -115,20 +118,6 @@
           - fsl,mpl3115
             # MPR121: Proximity Capacitive Touch Sensor Controller
           - fsl,mpr121
-            # Monolithic Power Systems Inc. multi-phase controller mp2856
-          - mps,mp2856
-            # Monolithic Power Systems Inc. multi-phase controller mp2857
-          - mps,mp2857
-            # Monolithic Power Systems Inc. multi-phase controller mp2888
-          - mps,mp2888
-            # Monolithic Power Systems Inc. multi-phase controller mp2971
-          - mps,mp2971
-            # Monolithic Power Systems Inc. multi-phase controller mp2973
-          - mps,mp2973
-            # Monolithic Power Systems Inc. multi-phase controller mp2975
-          - mps,mp2975
-            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
-          - mps,mp5990
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)
@@ -137,16 +126,10 @@
           - ibm,cffps1
             # IBM Common Form Factor Power Supply Versions 2
           - ibm,cffps2
+            # Infineon barometric pressure and temperature sensor
+          - infineon,dps310
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
-            # Infineon IR38060 Voltage Regulator
-          - infineon,ir38060
-            # Infineon IR38064 Voltage Regulator
-          - infineon,ir38064
-            # Infineon IR38164 Voltage Regulator
-          - infineon,ir38164
-            # Infineon IR38263 Voltage Regulator
-          - infineon,ir38263
             # Infineon IRPS5401 Voltage Regulator (PMIC)
           - infineon,irps5401
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
@@ -195,6 +178,8 @@
           - maxim,max1237
             # Temperature Sensor, I2C interface
           - maxim,max1619
+            # 3-Channel Remote Temperature Sensor
+          - maxim,max31730
             # 10-bit 10 kOhm linear programmable voltage divider
           - maxim,max5481
             # 10-bit 50 kOhm linear programmable voltage divider
@@ -207,8 +192,6 @@
           - maxim,max6621
             # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
           - maxim,max6625
-            # 3-Channel Remote Temperature Sensor
-          - maxim,max31730
             # mCube 3-axis 8-bit digital accelerometer
           - mcube,mc3230
             # Measurement Specialities I2C temperature and humidity sensor
@@ -239,8 +222,6 @@
           - memsic,mxc6655
             # Menlo on-board CPLD trivial SPI device
           - menlo,m53cpld
-            # Micron SPI NOR Authenta
-          - micron,spi-authenta
             # Microchip differential I2C ADC, 1 Channel, 18 bit
           - microchip,mcp3421
             # Microchip differential I2C ADC, 2 Channel, 18 bit
@@ -257,40 +238,58 @@
           - microchip,mcp3427
             # Microchip differential I2C ADC, 4 Channel, 16 bit
           - microchip,mcp3428
-            # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4017-502
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4017-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4017-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4017-104
             # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4018-502
+          - microchip,mcp4017-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4017-503
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4018-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4018-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4018-104
             # Microchip 7-bit Single I2C Digital POT (5k)
-          - microchip,mcp4019-502
+          - microchip,mcp4018-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4018-503
             # Microchip 7-bit Single I2C Digital POT (10k)
           - microchip,mcp4019-103
-            # Microchip 7-bit Single I2C Digital POT (50k)
-          - microchip,mcp4019-503
             # Microchip 7-bit Single I2C Digital POT (100k)
           - microchip,mcp4019-104
+            # Microchip 7-bit Single I2C Digital POT (5k)
+          - microchip,mcp4019-502
+            # Microchip 7-bit Single I2C Digital POT (50k)
+          - microchip,mcp4019-503
             # PWM Fan Speed Controller With Fan Fault Detection
           - microchip,tc654
             # PWM Fan Speed Controller With Fan Fault Detection
           - microchip,tc655
+            # Micron SPI NOR Authenta
+          - micron,spi-authenta
             # MiraMEMS DA226 2-axis 14-bit digital accelerometer
           - miramems,da226
             # MiraMEMS DA280 3-axis 14-bit digital accelerometer
           - miramems,da280
             # MiraMEMS DA311 3-axis 12-bit digital accelerometer
           - miramems,da311
+            # Monolithic Power Systems Inc. multi-phase controller mp2856
+          - mps,mp2856
+            # Monolithic Power Systems Inc. multi-phase controller mp2857
+          - mps,mp2857
+            # Monolithic Power Systems Inc. multi-phase controller mp2888
+          - mps,mp2888
+            # Monolithic Power Systems Inc. multi-phase controller mp2971
+          - mps,mp2971
+            # Monolithic Power Systems Inc. multi-phase controller mp2973
+          - mps,mp2973
+            # Monolithic Power Systems Inc. multi-phase controller mp2975
+          - mps,mp2975
+            # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
+          - mps,mp5990
+            # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
+          - mps,mpq8785
             # Temperature sensor with integrated fan control
           - national,lm63
             # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
@@ -321,12 +320,12 @@
           - samsung,exynos-sataphy-i2c
             # Semtech sx1301 baseband processor
           - semtech,sx1301
-            # Sensirion low power multi-pixel gas sensor with I2C interface
-          - sensirion,sgpc3
             # Sensirion multi-pixel gas sensor with I2C interface
           - sensirion,sgp30
             # Sensirion gas sensor with I2C interface
           - sensirion,sgp40
+            # Sensirion low power multi-pixel gas sensor with I2C interface
+          - sensirion,sgpc3
             # Sensirion temperature & humidity sensor with I2C interface
           - sensirion,sht4x
             # Sensortek 3 axis accelerometer
@@ -372,8 +371,6 @@
           - ti,lm74
             # Temperature sensor with integrated fan control
           - ti,lm96000
-            # I2C Touch-Screen Controller
-          - ti,tsc2003
             # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
           - ti,tmp103
             # Thermometer with SPI interface
@@ -395,10 +392,12 @@
           - ti,tps544b25
           - ti,tps544c20
           - ti,tps544c25
-            # Winbond/Nuvoton H/W Monitor
-          - winbond,w83793
+            # I2C Touch-Screen Controller
+          - ti,tsc2003
             # Vicor Corporation Digital Supervisor
           - vicor,pli1209bc
+            # Winbond/Nuvoton H/W Monitor
+          - winbond,w83793
 
 required:
   - compatible
diff --git a/Bindings/ufs/qcom,ufs.yaml b/Bindings/ufs/qcom,ufs.yaml
index 10c1464..cd3680d 100644
--- a/Bindings/ufs/qcom,ufs.yaml
+++ b/Bindings/ufs/qcom,ufs.yaml
@@ -27,10 +27,13 @@
           - qcom,msm8996-ufshc
           - qcom,msm8998-ufshc
           - qcom,sa8775p-ufshc
+          - qcom,sc7180-ufshc
           - qcom,sc7280-ufshc
+          - qcom,sc8180x-ufshc
           - qcom,sc8280xp-ufshc
           - qcom,sdm845-ufshc
           - qcom,sm6115-ufshc
+          - qcom,sm6125-ufshc
           - qcom,sm6350-ufshc
           - qcom,sm8150-ufshc
           - qcom,sm8250-ufshc
@@ -42,11 +45,11 @@
       - const: jedec,ufs-2.0
 
   clocks:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   clock-names:
-    minItems: 8
+    minItems: 7
     maxItems: 11
 
   dma-coherent: true
@@ -117,9 +120,35 @@
         compatible:
           contains:
             enum:
+              - qcom,sc7180-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          maxItems: 1
+        reg-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,msm8998-ufshc
               - qcom,sa8775p-ufshc
               - qcom,sc7280-ufshc
+              - qcom,sc8180x-ufshc
               - qcom,sc8280xp-ufshc
               - qcom,sm8250-ufshc
               - qcom,sm8350-ufshc
@@ -215,6 +244,7 @@
           contains:
             enum:
               - qcom,sm6115-ufshc
+              - qcom,sm6125-ufshc
     then:
       properties:
         clocks:
@@ -248,7 +278,7 @@
         reg:
           maxItems: 1
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 8
     else:
       properties:
@@ -256,7 +286,7 @@
           minItems: 1
           maxItems: 2
         clocks:
-          minItems: 8
+          minItems: 7
           maxItems: 11
 
 unevaluatedProperties: false
diff --git a/Bindings/usb/analogix,anx7411.yaml b/Bindings/usb/analogix,anx7411.yaml
index e4d8933..3f5857a 100644
--- a/Bindings/usb/analogix,anx7411.yaml
+++ b/Bindings/usb/analogix,anx7411.yaml
@@ -23,24 +23,11 @@
   connector:
     type: object
     $ref: ../connector/usb-connector.yaml
-    unevaluatedProperties: false
-
-    description:
-      Properties for usb c connector.
 
     properties:
       compatible:
         const: usb-c-connector
 
-      power-role: true
-
-      data-role: true
-
-      try-power-role: true
-
-    required:
-      - compatible
-
 required:
   - compatible
   - reg
diff --git a/Bindings/usb/ci-hdrc-usb2.yaml b/Bindings/usb/ci-hdrc-usb2.yaml
index b7e664f..3b56e0e 100644
--- a/Bindings/usb/ci-hdrc-usb2.yaml
+++ b/Bindings/usb/ci-hdrc-usb2.yaml
@@ -313,7 +313,7 @@
 
   usb-phy:
     description: phandle for the PHY device. Use "phys" instead.
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     deprecated: true
 
   fsl,usbphy:
diff --git a/Bindings/usb/cypress,hx3.yaml b/Bindings/usb/cypress,hx3.yaml
index 47add0d..2809661 100644
--- a/Bindings/usb/cypress,hx3.yaml
+++ b/Bindings/usb/cypress,hx3.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/usb/cypress,hx3.yaml#
diff --git a/Bindings/usb/fcs,fsa4480.yaml b/Bindings/usb/fcs,fsa4480.yaml
index f9410eb..8b25b9a 100644
--- a/Bindings/usb/fcs,fsa4480.yaml
+++ b/Bindings/usb/fcs,fsa4480.yaml
@@ -27,13 +27,8 @@
   vcc-supply:
     description: power supply (2.7V-5.5V)
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
@@ -79,6 +74,9 @@
   - reg
   - port
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/generic-ehci.yaml b/Bindings/usb/generic-ehci.yaml
index 87986c4..2ed178f 100644
--- a/Bindings/usb/generic-ehci.yaml
+++ b/Bindings/usb/generic-ehci.yaml
@@ -77,6 +77,7 @@
           - const: usb-ehci
       - enum:
           - generic-ehci
+          - marvell,ac5-ehci
           - marvell,armada-3700-ehci
           - marvell,orion-ehci
           - nuvoton,npcm750-ehci
diff --git a/Bindings/usb/gpio-sbu-mux.yaml b/Bindings/usb/gpio-sbu-mux.yaml
index d3b2b66..88e1607 100644
--- a/Bindings/usb/gpio-sbu-mux.yaml
+++ b/Bindings/usb/gpio-sbu-mux.yaml
@@ -33,13 +33,8 @@
   vcc-supply:
     description: power supply
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
@@ -54,6 +49,9 @@
   - orientation-switch
   - port
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
new file mode 100644
index 0000000..f301169
--- /dev/null
+++ b/Bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Hi3798MV200 DWC3 USB SoC controller
+
+maintainers:
+  - Yang Xiwen <forbidden405@foxmail.com>
+
+properties:
+  compatible:
+    const: hisilicon,hi3798mv200-dwc3
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: Controller bus clock
+      - description: Controller suspend clock
+      - description: Controller reference clock
+      - description: Controller gm clock
+      - description: Controller gs clock
+      - description: Controller utmi clock
+      - description: Controller pipe clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: suspend
+      - const: ref
+      - const: gm
+      - const: gs
+      - const: utmi
+      - const: pipe
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: soft
+
+patternProperties:
+  '^usb@[0-9a-f]+$':
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb {
+        compatible = "hisilicon,hi3798mv200-dwc3";
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        clocks = <&clk_bus>,
+                 <&clk_suspend>,
+                 <&clk_ref>,
+                 <&clk_gm>,
+                 <&clk_gs>,
+                 <&clk_utmi>,
+                 <&clk_pipe>;
+        clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe";
+        resets = <&crg 0xb0 12>;
+        reset-names = "soft";
+
+        usb@98a0000 {
+            compatible = "snps,dwc3";
+            reg = <0x98a0000 0x10000>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk_bus>,
+                     <&clk_suspend>,
+                     <&clk_ref>;
+            clock-names = "bus_early", "suspend", "ref";
+            phys = <&usb2_phy1_port2>, <&combphy0 0>;
+            phy-names = "usb2-phy", "usb3-phy";
+            maximum-speed = "super-speed";
+            dr_mode = "host";
+        };
+    };
diff --git a/Bindings/usb/ite,it5205.yaml b/Bindings/usb/ite,it5205.yaml
new file mode 100644
index 0000000..36ec425
--- /dev/null
+++ b/Bindings/usb/ite,it5205.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ite,it5205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT5202 Type-C USB Alternate Mode Passive MUX
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Tianping Fang <tianping.fang@mediatek.com>
+
+properties:
+  compatible:
+    const: ite,it5205
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Power supply for VCC pin (3.3V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ite,ovp-enable:
+    description: Enable Over Voltage Protection functionality
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the IT5205 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - orientation-switch
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@48 {
+          compatible = "ite,it5205";
+          reg = <0x48>;
+
+          mode-switch;
+          orientation-switch;
+
+          vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+          port {
+            it5205_usbss_sbu: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...
diff --git a/Bindings/usb/mediatek,mtu3.yaml b/Bindings/usb/mediatek,mtu3.yaml
index a59d912..d4e187c 100644
--- a/Bindings/usb/mediatek,mtu3.yaml
+++ b/Bindings/usb/mediatek,mtu3.yaml
@@ -185,7 +185,10 @@
             2 - used by mt2712 etc, revision 2 with following IPM rule;
             101 - used by mt8183, specific 1.01;
             102 - used by mt8192, specific 1.02;
-          enum: [1, 2, 101, 102]
+            103 - used by mt8195, IP0, specific 1.03;
+            105 - used by mt8195, IP2, specific 1.05;
+            106 - used by mt8195, IP3, specific 1.06;
+          enum: [1, 2, 101, 102, 103, 105, 106]
 
   mediatek,u3p-dis-msk:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Bindings/usb/microchip,usb5744.yaml b/Bindings/usb/microchip,usb5744.yaml
index 445183d..e2a72de 100644
--- a/Bindings/usb/microchip,usb5744.yaml
+++ b/Bindings/usb/microchip,usb5744.yaml
@@ -72,8 +72,6 @@
         i2c-bus: false
     else:
       $ref: /schemas/usb/usb-device.yaml
-      required:
-        - peer-hub
 
 additionalProperties: false
 
diff --git a/Bindings/usb/nxp,ptn36502.yaml b/Bindings/usb/nxp,ptn36502.yaml
index eee548a..d805dde 100644
--- a/Bindings/usb/nxp,ptn36502.yaml
+++ b/Bindings/usb/nxp,ptn36502.yaml
@@ -20,13 +20,8 @@
   vdd18-supply:
     description: Power supply for VDD18 pin
 
-  retimer-switch:
-    description: Flag the port as possible handle of SuperSpeed signals retiming
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  orientation-switch: true
+  retimer-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -49,6 +44,9 @@
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/nxp,ptn5110.yaml b/Bindings/usb/nxp,ptn5110.yaml
index eaedb4c..65a8632 100644
--- a/Bindings/usb/nxp,ptn5110.yaml
+++ b/Bindings/usb/nxp,ptn5110.yaml
@@ -11,7 +11,9 @@
 
 properties:
   compatible:
-    const: nxp,ptn5110
+    items:
+      - const: nxp,ptn5110
+      - const: tcpci
 
   reg:
     maxItems: 1
@@ -41,7 +43,7 @@
         #size-cells = <0>;
 
         tcpci@50 {
-            compatible = "nxp,ptn5110";
+            compatible = "nxp,ptn5110", "tcpci";
             reg = <0x50>;
             interrupt-parent = <&gpio3>;
             interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Bindings/usb/onnn,nb7vpq904m.yaml b/Bindings/usb/onnn,nb7vpq904m.yaml
index c0201da..589914d 100644
--- a/Bindings/usb/onnn,nb7vpq904m.yaml
+++ b/Bindings/usb/onnn,nb7vpq904m.yaml
@@ -21,14 +21,8 @@
     description: power supply (1.8V)
 
   enable-gpios: true
-
-  retimer-switch:
-    description: Flag the port as possible handle of SuperSpeed signals retiming
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  orientation-switch: true
+  retimer-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -95,6 +89,9 @@
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/qcom,dwc3.yaml b/Bindings/usb/qcom,dwc3.yaml
index 63d150b..38a3404 100644
--- a/Bindings/usb/qcom,dwc3.yaml
+++ b/Bindings/usb/qcom,dwc3.yaml
@@ -102,7 +102,7 @@
     description: |
       Different types of interrupts are used based on HS PHY used on target:
         - pwr_event: Used for wakeup based on other power events.
-        - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
+        - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
                        hs_phy_irq which is not triggered by default and its
                        functionality is mutually exclusive to that of
                        {dp/dm}_hs_phy_irq and qusb2_phy_irq.
diff --git a/Bindings/usb/qcom,pmic-typec.yaml b/Bindings/usb/qcom,pmic-typec.yaml
index 55df312..d969457 100644
--- a/Bindings/usb/qcom,pmic-typec.yaml
+++ b/Bindings/usb/qcom,pmic-typec.yaml
@@ -14,8 +14,19 @@
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8150b-typec
+    oneOf:
+      - enum:
+          - qcom,pmi632-typec
+          - qcom,pm8150b-typec
+      - items:
+          - enum:
+              - qcom,pm6150-typec
+          - const: qcom,pm8150b-typec
+      - items:
+          - enum:
+              - qcom,pm4125-typec
+          - const: qcom,pmi632-typec
+
 
   connector:
     type: object
@@ -24,9 +35,11 @@
 
   reg:
     description: Type-C port and pdphy SPMI register base offsets
+    minItems: 1
     maxItems: 2
 
   interrupts:
+    minItems: 8
     items:
       - description: Type-C CC attach notification, VBUS error, tCCDebounce done
       - description: Type-C VCONN powered
@@ -46,6 +59,7 @@
       - description: Power Domain Fast Role Swap event
 
   interrupt-names:
+    minItems: 8
     items:
       - const: or-rid-detect-change
       - const: vpd-detect
@@ -81,7 +95,33 @@
   - interrupts
   - interrupt-names
   - vdd-vbus-supply
-  - vdd-pdphy-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi632-typec
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        interrupts:
+          maxItems: 8
+        interrupt-names:
+          maxItems: 8
+        vdd-pdphy-supply: false
+    else:
+      properties:
+        reg:
+          maxItems: 2
+        interrupts:
+          minItems: 16
+        interrupt-names:
+          maxItems: 16
+      required:
+        - vdd-pdphy-supply
 
 additionalProperties: false
 
diff --git a/Bindings/usb/qcom,wcd939x-usbss.yaml b/Bindings/usb/qcom,wcd939x-usbss.yaml
index 7ddfd33..9634672 100644
--- a/Bindings/usb/qcom,wcd939x-usbss.yaml
+++ b/Bindings/usb/qcom,wcd939x-usbss.yaml
@@ -35,13 +35,8 @@
   vdd-supply:
     description: USBSS VDD power supply
 
-  mode-switch:
-    description: Flag the port as possible handle of altmode switching
-    type: boolean
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
+  mode-switch: true
+  orientation-switch: true
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -63,6 +58,9 @@
   - reg
   - ports
 
+allOf:
+  - $ref: usb-switch.yaml#
+
 additionalProperties: false
 
 examples:
diff --git a/Bindings/usb/realtek,rts5411.yaml b/Bindings/usb/realtek,rts5411.yaml
index f0784d2..0874fc2 100644
--- a/Bindings/usb/realtek,rts5411.yaml
+++ b/Bindings/usb/realtek,rts5411.yaml
@@ -21,6 +21,12 @@
 
   reg: true
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   vdd-supply:
     description:
       phandle to the regulator that provides power to the hub.
@@ -30,6 +36,36 @@
     description:
       phandle to the peer hub on the controller.
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          1st downstream facing USB port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          2nd downstream facing USB port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          3rd downstream facing USB port
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          4th downstream facing USB port
+
+patternProperties:
+  '^.*@[1-4]$':
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+
 required:
   - peer-hub
   - compatible
@@ -50,6 +86,13 @@
             reg = <1>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_3_0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* USB 2.0 device on port 2 */
+            device@2 {
+                compatible = "usb123,4567";
+                reg = <2>;
+            };
         };
 
         /* 3.0 hub on port 2 */
@@ -58,5 +101,17 @@
             reg = <2>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_2_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* Type-A connector on port 4 */
+                port@4 {
+                    reg = <4>;
+                    endpoint {
+                      remote-endpoint = <&usb_a0_ss>;
+                    };
+                };
+            };
         };
     };
diff --git a/Bindings/usb/ti,am62-usb.yaml b/Bindings/usb/ti,am62-usb.yaml
index fec5651..f6e6d08 100644
--- a/Bindings/usb/ti,am62-usb.yaml
+++ b/Bindings/usb/ti,am62-usb.yaml
@@ -14,7 +14,10 @@
     const: ti,am62-usb
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: USB CFG register space
+      - description: USB PHY2 register space
 
   ranges: true
 
@@ -82,7 +85,8 @@
 
       usbss1: usb@f910000 {
         compatible = "ti,am62-usb";
-        reg = <0x00 0x0f910000 0x00 0x800>;
+        reg = <0x00 0x0f910000 0x00 0x800>,
+              <0x00 0x0f918000 0x00 0x400>;
         clocks = <&k3_clks 162 3>;
         clock-names = "ref";
         ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
diff --git a/Bindings/usb/ti,usb8020b.yaml b/Bindings/usb/ti,usb8020b.yaml
new file mode 100644
index 0000000..8ef1177
--- /dev/null
+++ b/Bindings/usb/ti,usb8020b.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI USB8020B USB 3.0 hub controller
+
+maintainers:
+  - Macpaul Lin <macpaul.lin@mediatek.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb451,8025
+      - usb451,8027
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb451,8027";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb451,8025";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+          vdd-supply = <&usb_hub_fixed_3v3>;
+        };
+    };
diff --git a/Bindings/usb/usb-nop-xceiv.yaml b/Bindings/usb/usb-nop-xceiv.yaml
index 6734f4d..9b3ea23 100644
--- a/Bindings/usb/usb-nop-xceiv.yaml
+++ b/Bindings/usb/usb-nop-xceiv.yaml
@@ -37,10 +37,11 @@
     description: Should specify the GPIO detecting a VBus insertion
     maxItems: 1
 
-  vbus-regulator:
-    description: Should specify the regulator supplying current drawn from
-      the VBus line.
-    $ref: /schemas/types.yaml#/definitions/phandle
+  vbus-supply:
+    description: regulator supplying VBUS. It will be enabled and disabled
+                 dynamically in OTG mode. If the regulator is controlled by a
+                 GPIO line, this should be modeled as a regulator-fixed and
+                 referenced by this supply.
 
   wakeup-source:
     description:
@@ -65,7 +66,7 @@
         vcc-supply = <&hsusb1_vcc_regulator>;
         reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
         vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-        vbus-regulator = <&vbus_regulator>;
+        vbus-supply = <&vbus_regulator>;
         #phy-cells = <0>;
     };
 
diff --git a/Bindings/usb/usb-switch.yaml b/Bindings/usb/usb-switch.yaml
new file mode 100644
index 0000000..da76118
--- /dev/null
+++ b/Bindings/usb/usb-switch.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB Orientation and Mode Switches Common Properties
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+  Common properties for devices handling USB mode and orientation switching.
+
+properties:
+  mode-switch:
+    description: Possible handler of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Possible handler of orientation switching
+    type: boolean
+
+  retimer-switch:
+    description: Possible handler of SuperSpeed signals retiming
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the device to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Super Speed (SS) Output endpoint to the Type-C connector
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Super Speed (SS) Input endpoint from the Super-Speed PHY
+        unevaluatedProperties: false
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                $ref: /schemas/types.yaml#/definitions/uint32-array
+                minItems: 1
+                maxItems: 8
+                uniqueItems: true
+                items:
+                  maximum: 8
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+additionalProperties: true
diff --git a/Bindings/usb/usb.yaml b/Bindings/usb/usb.yaml
index 326b14f..1761b7a 100644
--- a/Bindings/usb/usb.yaml
+++ b/Bindings/usb/usb.yaml
@@ -25,6 +25,8 @@
 
   usb-phy:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       List of all the USB PHYs on this HCD to be accepted by the legacy USB
       Physical Layer subsystem.
diff --git a/Bindings/vendor-prefixes.yaml b/Bindings/vendor-prefixes.yaml
index 1a0dc04..b97d298 100644
--- a/Bindings/vendor-prefixes.yaml
+++ b/Bindings/vendor-prefixes.yaml
@@ -39,6 +39,8 @@
     description: ShenZhen Asia Better Technology Ltd.
   "^acbel,.*":
     description: Acbel Polytech Inc.
+  "^acelink,.*":
+    description: Acelink Technology Co., Ltd.
   "^acer,.*":
     description: Acer Inc.
   "^acme,.*":
@@ -61,6 +63,8 @@
     description: Analog Devices, Inc.
   "^adieng,.*":
     description: ADI Engineering, Inc.
+  "^admatec,.*":
+    description: admatec GmbH
   "^advantech,.*":
     description: Advantech Corporation
   "^aeroflexgaisler,.*":
@@ -107,6 +111,8 @@
     description: Amlogic, Inc.
   "^ampere,.*":
     description: Ampere Computing LLC
+  "^amphenol,.*":
+    description: Amphenol Advanced Sensors
   "^ampire,.*":
     description: Ampire Co., Ltd.
   "^ams,.*":
@@ -159,6 +165,8 @@
     description: ASPEED Technology Inc.
   "^asrock,.*":
     description: ASRock Inc.
+  "^asteralabs,.*":
+    description: Astera Labs, Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
   "^atheros,.*":
@@ -230,6 +238,8 @@
     description: ByteDance Ltd.
   "^calamp,.*":
     description: CalAmp Corp.
+  "^calao,.*":
+    description: CALAO Systems SAS
   "^calaosystems,.*":
     description: CALAO Systems SAS
   "^calxeda,.*":
@@ -478,6 +488,9 @@
     description: EZchip Semiconductor
   "^facebook,.*":
     description: Facebook
+  "^fairchild,.*":
+    description: Fairchild Semiconductor (deprecated, use 'onnn')
+    deprecated: true
   "^fairphone,.*":
     description: Fairphone B.V.
   "^faraday,.*":
@@ -500,6 +513,8 @@
     description: FocalTech Systems Co.,Ltd
   "^forlinx,.*":
     description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^freebox,.*":
+    description: Freebox SAS
   "^freecom,.*":
     description: Freecom Gmbh
   "^frida,.*":
@@ -542,6 +557,8 @@
     description: Giantec Semiconductor, Inc.
   "^giantplus,.*":
     description: Giantplus Technology Co., Ltd.
+  "^glinet,.*":
+    description: GL Intelligence, Inc.
   "^globalscale,.*":
     description: Globalscale Technologies, Inc.
   "^globaltop,.*":
@@ -601,6 +618,8 @@
     description: Honestar Technologies Co., Ltd.
   "^honeywell,.*":
     description: Honeywell
+  "^hoperf,.*":
+    description: Shenzhen Hope Microelectronics Co., Ltd.
   "^hoperun,.*":
     description: Jiangsu HopeRun Software Co., Ltd.
   "^hp,.*":
@@ -631,12 +650,16 @@
     description: Hyundai Technology
   "^i2se,.*":
     description: I2SE GmbH
+  "^IBM,.*":
+    description: International Business Machines (IBM)
   "^ibm,.*":
     description: International Business Machines (IBM)
   "^icplus,.*":
     description: IC Plus Corp.
   "^idt,.*":
     description: Integrated Device Technologies, Inc.
+  "^iei,.*":
+    description: IEI Integration Corp.
   "^ifi,.*":
     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
   "^ilitek,.*":
@@ -719,6 +742,8 @@
     description: JetHome (IP Sokolov P.A.)
   "^jianda,.*":
     description: Jiandangjing Technology Co., Ltd.
+  "^jide,.*":
+    description: Jide Tech
   "^joz,.*":
     description: JOZ BV
   "^kam,.*":
@@ -821,6 +846,8 @@
     description: LSI Corp. (LSI Logic)
   "^lunzn,.*":
     description: Shenzhen Lunzn Technology Co., Ltd.
+  "^luxul,.*":
+    description: Lagrand | AV
   "^lwn,.*":
     description: Liebherr-Werk Nenzing GmbH
   "^lxa,.*":
@@ -899,6 +926,9 @@
     description: Miniand Tech
   "^minix,.*":
     description: MINIX Technology Ltd.
+  "^mips,.*":
+    description: MIPS Technology (deprecated, use 'mti' or 'img')
+    deprecated: true
   "^miramems,.*":
     description: MiraMEMS Sensing Technology Co., Ltd.
   "^mitsubishi,.*":
@@ -911,6 +941,8 @@
     description: Miyoo
   "^mntre,.*":
     description: MNT Research GmbH
+  "^mobileye,.*":
+    description: Mobileye Vision Technologies Ltd.
   "^modtronix,.*":
     description: Modtronix Engineering
   "^moortec,.*":
@@ -993,6 +1025,9 @@
     description: Novatek
   "^novtech,.*":
     description: NovTech, Inc.
+  "^numonyx,.*":
+    description: Numonyx (deprecated, use micron)
+    deprecated: true
   "^nutsboard,.*":
     description: NutsBoard
   "^nuvoton,.*":
@@ -1297,6 +1332,8 @@
     description: Skyworks Solutions, Inc.
   "^smartlabs,.*":
     description: SmartLabs LLC
+  "^smartrg,.*":
+    description: SmartRG, Inc.
   "^smi,.*":
     description: Silicon Motion Technology Corporation
   "^smsc,.*":
@@ -1484,6 +1521,8 @@
     description: Ufi Space Co., Ltd.
   "^ugoos,.*":
     description: Ugoos Industrial Co., Ltd.
+  "^uni-t,.*":
+    description: Uni-Trend Technology (China) Co., Ltd.
   "^uniwest,.*":
     description: United Western Technologies Corp (UniWest)
   "^upisemi,.*":
@@ -1534,10 +1573,16 @@
     description: VoCore Studio
   "^voipac,.*":
     description: Voipac Technologies s.r.o.
+  "^voltafield,.*":
+    description: Voltafield Technology Corp.
   "^vot,.*":
     description: Vision Optical Technology Co., Ltd.
+  "^vscom,.*":
+    description: VS Visions Systems GmbH
   "^vxt,.*":
     description: VXT Ltd
+  "^wacom,.*":
+    description: Wacom
   "^wanchanglong,.*":
     description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^wand,.*":
diff --git a/Bindings/w1/w1-uart.yaml b/Bindings/w1/w1-uart.yaml
new file mode 100644
index 0000000..bd7c62d
--- /dev/null
+++ b/Bindings/w1/w1-uart.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART 1-Wire Bus
+
+maintainers:
+  - Christoph Winklhofer <cj.winklhofer@gmail.com>
+
+description: |
+  UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus
+  to create the 1-Wire timing patterns.
+
+  The UART peripheral must support full-duplex and operate in open-drain
+  mode. The timing patterns are generated by a specific combination of
+  baud-rate and transmitted byte, which corresponds to a 1-Wire read bit,
+  write bit or reset pulse.
+
+  The default baud-rate for reset and presence detection is 9600 and for
+  a 1-Wire read or write operation 115200. In case the actual baud-rate
+  is different from the requested one, the transmitted byte is adapted
+  to generate the 1-Wire timing patterns.
+
+  https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html
+
+properties:
+  compatible:
+    const: w1-uart
+
+  reset-bps:
+    default: 9600
+    description:
+      The baud rate for the 1-Wire reset and presence detect.
+
+  write-0-bps:
+    default: 115200
+    description:
+      The baud rate for the 1-Wire write-0 cycle.
+
+  write-1-bps:
+    default: 115200
+    description:
+      The baud rate for the 1-Wire write-1 and read cycle.
+
+required:
+  - compatible
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    serial {
+        onewire {
+            compatible = "w1-uart";
+        };
+    };
diff --git a/Bindings/watchdog/arm,sp805.yaml b/Bindings/watchdog/arm,sp805.yaml
index 7aea255..bd7c09e 100644
--- a/Bindings/watchdog/arm,sp805.yaml
+++ b/Bindings/watchdog/arm,sp805.yaml
@@ -50,6 +50,10 @@
       - const: wdog_clk
       - const: apb_pclk
 
+  resets:
+    maxItems: 1
+    description: WDOGRESn input reset signal for sp805 module.
+
 required:
   - compatible
   - reg
@@ -67,4 +71,5 @@
         interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&wdt_clk>, <&apb_pclk>;
         clock-names = "wdog_clk", "apb_pclk";
+        resets = <&wdt_rst>;
     };
diff --git a/Bindings/watchdog/atmel,sama5d4-wdt.yaml b/Bindings/watchdog/atmel,sama5d4-wdt.yaml
index 816f85e..cdf87db 100644
--- a/Bindings/watchdog/atmel,sama5d4-wdt.yaml
+++ b/Bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -14,10 +14,14 @@
 
 properties:
   compatible:
-    enum:
-      - atmel,sama5d4-wdt
-      - microchip,sam9x60-wdt
-      - microchip,sama7g5-wdt
+    oneOf:
+      - enum:
+          - atmel,sama5d4-wdt
+          - microchip,sam9x60-wdt
+          - microchip,sama7g5-wdt
+      - items:
+          - const: microchip,sam9x7-wdt
+          - const: microchip,sam9x60-wdt
 
   reg:
     maxItems: 1
diff --git a/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt b/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt
deleted file mode 100644
index f801d71..0000000
--- a/Bindings/watchdog/brcm,bcm2835-pm-wdog.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-BCM2835 Watchdog timer
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-pm-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- timeout-sec   : Contains the watchdog timeout in seconds
-
-Example:
-
-watchdog {
-	compatible = "brcm,bcm2835-pm-wdt";
-	reg = <0x7e100000 0x28>;
-	timeout-sec = <10>;
-};
diff --git a/Bindings/watchdog/qcom-wdt.yaml b/Bindings/watchdog/qcom-wdt.yaml
index a4f35c5..4758797 100644
--- a/Bindings/watchdog/qcom-wdt.yaml
+++ b/Bindings/watchdog/qcom-wdt.yaml
@@ -7,7 +7,7 @@
 title: Qualcomm Krait Processor Sub-system (KPSS) Watchdog timer
 
 maintainers:
-  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
 
 properties:
   $nodename:
diff --git a/Bindings/watchdog/renesas,wdt.yaml b/Bindings/watchdog/renesas,wdt.yaml
index 951a7d5..ffb17ad 100644
--- a/Bindings/watchdog/renesas,wdt.yaml
+++ b/Bindings/watchdog/renesas,wdt.yaml
@@ -71,6 +71,7 @@
               - renesas,r8a779a0-wdt     # R-Car V3U
               - renesas,r8a779f0-wdt     # R-Car S4-8
               - renesas,r8a779g0-wdt     # R-Car V4H
+              - renesas,r8a779h0-wdt     # R-Car V4M
           - const: renesas,rcar-gen4-wdt # R-Car Gen4
 
   reg:
diff --git a/Bindings/watchdog/sprd,sp9860-wdt.yaml b/Bindings/watchdog/sprd,sp9860-wdt.yaml
new file mode 100644
index 0000000..730d9a3
--- /dev/null
+++ b/Bindings/watchdog/sprd,sp9860-wdt.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/sprd,sp9860-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SP9860 watchdog timer
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: sprd,sp9860-wdt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: enable
+      - const: rtc_enable
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - timeout-sec
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        watchdog@40310000 {
+            compatible = "sprd,sp9860-wdt";
+            reg = <0 0x40310000 0 0x1000>;
+            interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&aon_gate CLK_APCPU_WDG_EB>, <&aon_gate CLK_AP_WDG_RTC_EB>;
+            clock-names = "enable", "rtc_enable";
+            timeout-sec = <12>;
+        };
+    };
+...
diff --git a/Bindings/watchdog/sprd-wdt.txt b/Bindings/watchdog/sprd-wdt.txt
deleted file mode 100644
index aeaf3e0..0000000
--- a/Bindings/watchdog/sprd-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Spreadtrum SoCs Watchdog timer
-
-Required properties:
-- compatible : Should be "sprd,sp9860-wdt".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : Exactly one interrupt specifier.
-- timeout-sec : Contain the default watchdog timeout in seconds.
-- clock-names : Contain the input clock names.
-- clocks : Phandles to input clocks.
-
-Example:
-	watchdog: watchdog@40310000 {
-		compatible = "sprd,sp9860-wdt";
-		reg = <0 0x40310000 0 0x1000>;
-		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-		timeout-sec = <12>;
-		clock-names = "enable", "rtc_enable";
-		clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
-	};
diff --git a/Bindings/watchdog/starfive,jh7100-wdt.yaml b/Bindings/watchdog/starfive,jh7100-wdt.yaml
index 68f3f6f..e21f807 100644
--- a/Bindings/watchdog/starfive,jh7100-wdt.yaml
+++ b/Bindings/watchdog/starfive,jh7100-wdt.yaml
@@ -19,14 +19,16 @@
   isn't cleared, the watchdog will reset the system unless the watchdog
   reset is disabled.
 
-allOf:
-  - $ref: watchdog.yaml#
-
 properties:
   compatible:
-    enum:
-      - starfive,jh7100-wdt
-      - starfive,jh7110-wdt
+    oneOf:
+      - enum:
+          - starfive,jh7100-wdt
+          - starfive,jh7110-wdt
+      - items:
+          - enum:
+              - starfive,jh8100-wdt
+          - const: starfive,jh7110-wdt
 
   reg:
     maxItems: 1
@@ -45,9 +47,8 @@
       - const: core
 
   resets:
-    items:
-      - description: APB reset
-      - description: Core reset
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -56,6 +57,27 @@
   - clock-names
   - resets
 
+allOf:
+  - $ref: watchdog.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - starfive,jh8100-wdt
+    then:
+      properties:
+        resets:
+          items:
+            - description: Core reset
+    else:
+      properties:
+        resets:
+          items:
+            - description: APB reset
+            - description: Core reset
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Bindings/writing-schema.rst b/Bindings/writing-schema.rst
index 0a6cf19..7e71cdd 100644
--- a/Bindings/writing-schema.rst
+++ b/Bindings/writing-schema.rst
@@ -31,7 +31,7 @@
   Indicates the meta-schema the schema file adheres to.
 
 title
-  A one-line description on the contents of the binding schema.
+  A one-line description of the hardware being described in the binding schema.
 
 maintainers
   A DT specific property. Contains a list of email address(es)
@@ -39,7 +39,7 @@
 
 description
   Optional. A multi-line text block containing any detailed
-  information about this binding. It should contain things such as what the block
+  information about this hardware. It should contain things such as what the block
   or device does, standards the device conforms to, and links to datasheets for
   more information.
 
@@ -71,9 +71,31 @@
   A list of DT properties from the 'properties' section that
   must always be present.
 
+additionalProperties / unevaluatedProperties
+  Keywords controlling how schema will validate properties not matched by this
+  schema's 'properties' or 'patternProperties'. Each schema is supposed to
+  have exactly one of these keywords in top-level part, so either
+  additionalProperties or unevaluatedProperties. Nested nodes, so properties
+  being objects, are supposed to have one as well.
+
+  * additionalProperties: false
+      Most common case, where no additional schema is referenced or if this
+      binding allows subset of properties from other referenced schemas.
+
+  * unevaluatedProperties: false
+      Used when this binding references other schema whose all properties
+      should be allowed.
+
+  * additionalProperties: true
+      Rare case, used for schemas implementing common set of properties. Such
+      schemas are supposed to be referenced by other schemas, which then use
+      'unevaluatedProperties: false'.  Typically bus or common-part schemas.
+
 examples
-  Optional. A list of one or more DTS hunks implementing the
-  binding. Note: YAML doesn't allow leading tabs, so spaces must be used instead.
+  Optional. A list of one or more DTS hunks implementing this binding only.
+  Example should not contain unrelated device nodes, e.g. consumer nodes in a
+  provider binding, other nodes referenced by phandle.
+  Note: YAML doesn't allow leading tabs, so spaces must be used instead.
 
 Unless noted otherwise, all properties are required.